journal article·2013-04-05

Characterization of an MgH2-Ni Alloy Prepared by Mechanical Grinding under Hydrogen

Myoung Youp Song, Young Jun Kwak, Seong Ho Lee, Hye Ryoung Park

Publisher page

Abstract

MgH2, rather than Mg, was employed as a starting material in this work. A sample with a composition of 82 wt% MgH2-18 wt% Ni (designated MgH2-18Ni) was prepared by reactive mechanical grinding. Its hydriding and dehydriding properties were then examined. An MgH2-Ni hydrogen-storage alloy that does not require an activation process was developed. The alloy was prepared by grinding for 4 h in a planetary ball mill at a ball disc revolution speed of 250 rpm under a hydrogen pressure of about 12 bar. The sample absorbed 3.51 wt% H for 5 min and 3.96 wt% H for 60 min at 573 K under 12 bar H2, and desorbed 0.90 wt% H for 10 min and 3.24 wt% H for 60 min at 573 K under 1.0 bar H2. MgH2-18Ni after reactive mechanical grinding contained β-MgH2, Ni, γ-MgH2 (a high-pressure form of MgH2), and a very small amount of MgO. The specific surface area and average particle size of MgH2-18Ni after reactive mechanical grinding were analyzed.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Hydrogen Storage and Materials · Superconductivity in MgB2 and Alloys · Nuclear Materials and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.