journal article·2018-07-05Open access

Effects of Si on the Characteristics of FCA Multi-Layer Weld Metal with 460 MPa Yield Strength Grade Steels for Ships and Marine Structures

Jong-Sig Kim, Myeong-Soo Lee, Jong-Min Jung, Han-Geul Choi, Sang-Hoon Jeong, Chang-Yong Kang

Abstract

This study investigated the effect of Si on the characteristics of FCA multi-layer weld metal with 460 MPa yield strength grade steels for ships and marine structures. The effect on microstructure was evaluated by tensile, charpy impact and CTOD testing of 4 FCAW welds containing various C and Si contents. C content affected weld metal properties depending on Si content, microstructure, strength and impact value. With lower C content, strength and impact value increased when Si content was reduced, because of higher AF volume fraction. With higher C content, those properties were little affected by Si content. These phenomena indicate that C affects phase transformation more than Si. The CTOD value was higher with lower Si and higher C content. This was interpreted to mean that a lower volume fraction of not only PF, FS but also the M-A phase, can affect crack initiation sites, due to higher C and lower Si contents.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Welding Techniques and Residual Stresses · Microstructure and Mechanical Properties of Steels · Fatigue and fracture mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (14)

Show source-provided references
1. Toyoda · 2008
2. Hiroshi · 2012
3. Bang · 2018 · 13
4. Akselsen · 1988 · 194
5. Lee · 2010 · 993
6. Yang · 1990 · 27
7. Bang · 2004 · 78
8. Kang · 2004 · 40
9. Abson · 1986 · 141
10. 10.1007/BF0113332710.1007/BF01133327 ↗
11. Kim · 2000 · 565
12. Hong · 2010 · 3
13. Matsuda · 1995 · 1
14. Jang · 1999 · 1