journal article·2018-02-05Open access

Effects of Feedstock Powder Characteristics on the Microstructural Features and Erosion Resistance of WC-12Co Coatings

Authors not provided

Abstract

WC-Co coatings manufactured by high velocity oxy-fuel (HVOF) spraying have a superior hardness and wear resistance. In this study, HVOF-sprayed WC-12Co coatings from three different feedstock powders were evaluated in terms of microstructural features, carbide decomposition and erosion resistance. The fusedcrushed and the sintered-crushed WC-12Co powders had an angular shape, a dense internal structure and a high apparent density, whereas the agglomerated-sintered powder was found to have a spherical morphology with a porous internal structure and a relatively low apparent density. These differences in powder characteristics significantly affected porosity, carbide decomposition, microhardness and erosion resistance in the WC-Co coating. The fused-crushed coating contained a large amount of intersplat pores and a low fraction of carbide, resulting in the lowest microhardness. The erosion wear rate of the fused-crushed coating increased sharply with increasing impact angle, due to the brittle damage mechanism. The agglomerated-sintered coatings had a low porosity and a high microhardness, and consequently exhibited superior erosion wear resistance with no dependency on impact angle.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advanced materials and composites · Metal Alloys Wear and Properties · High-Temperature Coating Behaviors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.