journal article·2017-12-05Open access

Development of the Elastic Modulus of 100 GPa Casting Alloys by Nickel Addition

Authors not provided

Abstract

In this research, we studied the effects of Ni, Ti, and B on the elastic modulus of hypereutectic Al-Si alloys and successfully synthesized 100 GPa Al casting alloys by designing various alloys phases. Generally, Al-Si based alloys are known in the automotive industry to be good casting alloys with high wear resistance, low thermal-expansion coefficient, good corrosion resistance at a wide range of temperatures, especially for cylinder blocks, cylinder heads, pistons and valve lifters, but the low elastic modulus of the alloys remaines a weakness. Previously, the elastic modulus of eutectic Al-Si casting alloys was enhanced by 10 GPa by strengthening phases with added Ti and B. However, elastic modulus was not enhanced by increasing Si content in the hypereutectic Al-Si alloys, since Si only reacts with the Ti containing strengthening phase. We overcame this problem by adding Ni to Ti and B containing hypereutectic Al-Si alloys. The effects of the strengthening phases produced by the addition of Ni, such as AlNi, AlNiCu, on the elastic modulus were studied, and we observed a two-fold enhancement in the wear resistance of the Ni, Ti, and B containing hypereutectic Al-Si alloys. The rate of strengthening by phases in the alloys was qualitatively analyzed by EPMA (Electron probe micro-analyzer), SEM (Scanning Electron microscopy), etc, and their mechanical properties were quantitatively evaluated by elastic modulus measurement and pin-on tester.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Metallurgy and Material Forming · Aluminum Alloy Microstructure Properties · Metallurgical Processes and Thermodynamics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.