journal article·2012-08-05

Characterization of Microstructure, Hardness and Oxidation Behavior of Carbon Steels Hot Dipped in Al and Al–1 at% Si Molten Baths

Dong Bok Lee, Trinh Wan Trung, Sun Kyu Kim, Min Jung Kim, Seul Ki Kim, Sung Jun Bong

Publisher page

Abstract

Medium carbon steel was aluminized by hot dipping into molten Al or Al-1 at% Si baths. After hot-dipping in these baths, a thin Al-rich topcoat and a thick alloy layer rich in Al5Fe2 formed on the surface. A small amount of FeAl and Al3Fe was incorporated in the alloy layer. Silicon from the Al-1 at% Si bath was uniformly distributed throughout the entire coating. The hot dipping increased the microhardness of the steel by about 8 times. Heating at 700-1000, however, decreased the microhardness through interdiffusion between the coating and the substrate. The oxidation at 700-1000 in air formed a thin protective a-Al2O3 layer, which provided good oxidation resistance. Silicon was oxidized to amorphous silica, exhibiting a glassy oxide surface.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Intermetallics and Advanced Alloy Properties · High-Temperature Coating Behaviors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.