Effect of Strength Grades of Dual Phase Steels on Failure Location and Joint Efficiency of GMAW Lap Joints
Source abstract
Abstract
Abstract: In this study, the effect of the material strength grades of cold rolled dual phase 590, 780, and 980 MPa steels on the weld strength of gas metal arc welding lap joints is investigated. With increasing strength grades of the base metal, the bead geometry is similar for identical welding currents and speeds. However, the failure location changes from a base metal to a fusion zone and the joint efficiency decreases with increasing material strength grades. This is attributed to the changes in the location of minimum hardness that result from the heat-affected zone softening phenomena. Joint efficiency is related to the ratio between the base metal hardness and minimum hardness of the welds. A prediction formula for joint efficiency (η) is obtained in terms of proportion of base metal hardness and minimum hardness (HMIN/HBM) as follows: η = 0.801 (HMIN/HBM) + 20.0.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Welding Techniques and Residual Stresses · Microstructure and Mechanical Properties of Steels · Advanced Welding Techniques Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.