journal article·2024-10-05Open access

Analysis of Thermoelectric Properties of Hot-deformed Bismuth Telluride Sintered Materials

Sung-Jae Joo, Ji-Hee Son, JeongIn Jang, Bok-Ki Min, Bong-Seo Kim, JongGan Hong, Dae-Keun Lee, Hyungmo Kim

Abstract

Bismuth telluride (Bi2Te3)-based alloys are widely used for thermoelectric cooling and power generation at low temperatures, and they are the only commercially available materials for thermoelectric applications below 500 K. The rhombohedral unit cell with a large c/a lattice constant ratio consisting of - Te-Bi-Te-Bi-Te- stacked layers inevitably brings about a large anisotropy in transport properties, which is why texturing is very important in polycrystalline Bi2Te3</sub alloys for maximum performance. In this report, p and n-type polycrystalline Bi2Te3</sub alloys were synthesized and hot-deformed to investigate the effects of texturing on thermoelectric properties. Hot deformation (HD) induces the strong alignment of (001) orientations along the compression direction, and a remarkable increase in the orientation factor F of (001) orientations is observed after HD in both p and n-type materials. All of the hot-deformed polycrystalline samples showed increased electrical conductivity (σ), power factor (PF), and thermal conductivity (k) in the in-plane (IP) direction, and vice versa in the out-of-plane (OOP) direction, which makes the IP direction of the hot-deformed bodies more favorable for module fabrication in terms of power factor, for both p and n-type Bi2Te3</sub-based alloys. However, due to the different degree of anisotropy of k and σ, the figures of merit (zT) were maximized in the OOP direction in the p-type materials after HD, whereas the zTs of the n-type materials were higher in the IP direction. This occurs because the anisotropy factor of electron conduction is higher than that of hole conduction, which more than offsets the advantage of the smaller k in the c-direction of n-type Bi2Te3</sub. The maximum zT of 1.33 (OOP) and 0.90 (IP) were obtained after HD from the p and n-type Bi2Te3 alloys, respectively, which were 9.3% and 18.4% higher than those of as-sintered materials.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advanced Semiconductor Detectors and Materials · Intermetallics and Advanced Alloy Properties · Material Science and Thermodynamics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. 10.1126/science.115889910.1126/science.1158899 ↗
2. 10.1016/j.enconman.2019.11237610.1016/j.enconman.2019.112376 ↗
3. 10.1016/j.applthermaleng.2021.11779310.1016/j.applthermaleng.2021.117793 ↗
4. 10.1088/0508-3443/5/11/30310.1088/0508-3443/5/11/303 ↗
5. 10.1126/science.aaa416610.1126/science.aaa4166 ↗
6. 10.1016/j.jallcom.2021.16103010.1016/j.jallcom.2021.161030 ↗
7. 10.3365/kjmm.2020.58.10.72110.3365/kjmm.2020.58.10.721 ↗
8. 10.3365/kjmm.2022.60.6.46310.3365/kjmm.2022.60.6.463 ↗
9. Lim · 2017 · 651
10. Jang · 2018 · 66
11. Zheng · 2015 · 1401391
12. 10.1002/adfm.20130014610.1002/adfm.201300146 ↗
13. Bed Poudel · 2008 · 634
14. 10.1039/d0ee01349h10.1039/d0ee01349h ↗
15. Hosokawa · 2019 · 10790
16. 10.3390/ma704257710.3390/ma7042577 ↗
17. Goldsmid · 2010 · 82
18. 10.1007/s11664-010-1181-910.1007/s11664-010-1181-9 ↗
19. 10.1016/j.solidstatesciences.2007.10.02210.1016/j.solidstatesciences.2007.10.022 ↗
20. 10.1111/jace.1297010.1111/jace.12970 ↗
21. 10.1002/adfm.20140047410.1002/adfm.201400474 ↗
22. 10.1021/acsami.9b1519810.1021/acsami.9b15198 ↗
23. 10.1039/c5tc02219c10.1039/c5tc02219c ↗
24. Navratil · 1996 · 1559
25. Satterhwaite · 1957 · 1164
26. Fukuhara · 2018 · 243105
27. 10.1016/j.apsusc.2019.14523610.1016/j.apsusc.2019.145236 ↗
28. Goldsmid · 2010 · 82