journal article·2024-06-05Open access

Microstructure and Tensile Properties of Ni-Base Superalloy IN738LC according to Solidification Rate and Heat Treatment

Byung-Hoon Kim, Byeong-Ook Kong, Yun-Kon Joo, Young-Kyu Ju, Hyun-Uk Hong, Je-Hyun Lee

Abstract

The strength of Ni-base superalloys mainly depends on the γ' precipitates that improve the strength of the materials at high temperatures. The presence of γ' particles within the matrix restricts dislocation movement, and optimized heat treatments can tailor the size, shape, and volume fraction of γ'. In this study the effects of solidification rate and solution temperature on the tensile properties of IN738LC superalloy were investigated. The secondary dendritic arm spacing of casting materials with different diameters was measured and the solidification rate of the casting materials was derived by comparing the results of the solidification microstructure obtained from a directional solidification experiment. The D17 material, which had a faster solidification rate, showed higher values of tensile strength and yield strength than the D60 material, which had a slower solidification rate. The study also concluded that the monomodal γ' precipitates in the S80 material have higher tensile strength and yield strength at room temperature and 760℃ than the bimodal γ' precipitates in the S20 material. As for the deformation behavior at 760℃, an isolated stacking fault was observed in the S20 material only within the large γ’ precipitates. In the S80 material, the high dislocation density increased the yield strength due to the strong interaction between dislocations and fine γ’ precipitates.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: High Temperature Alloys and Creep · Aluminum Alloy Microstructure Properties · Metallurgical Processes and Thermodynamics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. 10.1023/a:100486971485410.1023/a:1004869714854 ↗
2. 10.1023/a:101540811601610.1023/a:1015408116016 ↗
3. 10.1016/j.msea.2007.04.09810.1016/j.msea.2007.04.098 ↗
4. Mukherji · 1991 · 515
5. 10.1016/j.msea.2007.10.00410.1016/j.msea.2007.10.004 ↗
6. 10.1016/j.jallcom.2019.07.22110.1016/j.jallcom.2019.07.221 ↗
7. Preuss · 2008 · 158
8. 1981 · 5789
9. 10.1515/ijmr-1995-86030910.1515/ijmr-1995-860309 ↗
10. 10.1361/10599490077034599910.1361/105994900770345999 ↗
11. Gopinath · 2008 · 2340
12. 10.3365/kjmm.2022.60.12.94010.3365/kjmm.2022.60.12.940 ↗
13. Kim · 2006 · 450
14. Ye · 2002 · 897
15. 10.3365/kjmm.2023.61.4.26110.3365/kjmm.2023.61.4.261 ↗
16. Kim · 2023 · 55
17. 10.1007/s12540-022-01312-710.1007/s12540-022-01312-7 ↗
18. Choi · 2020 · 118
19. 10.1007/bf0264895010.1007/bf02648950 ↗
20. McLean · 1983 · 32
21. Boyraz · 2018 · 30
22. 10.1016/j.matlet.2012.01.02810.1016/j.matlet.2012.01.028 ↗
23. 10.7777/jkfs.2012.32.5.22510.7777/jkfs.2012.32.5.225 ↗
24. 10.1016/j.jallcom.2022.16639010.1016/j.jallcom.2022.166390 ↗
25. NATHAL · 1987 · 1961
26. 10.1361/10599490077034599910.1361/105994900770345999 ↗
27. 10.1515/ijmr-1995-86030910.1515/ijmr-1995-860309 ↗