journal article·2016-10-05Open access

Effect of Cold Drawing and Heat Treatment on the Microstructure of Invar36 Alloy Wire

Sang Yong Shin, Seung Youb Han, Seon Ah Jang, Hee-Chul Eun, Jung-Hoon Choi, Ki Rak Lee, Hwan Seo Park, Do-Hee Ahn, Soo Young Kim, Jea Youl Kim

Abstract

In this study, the effect of cold drawing and heat treatment on the microstructure of Invar36 alloy wire was investigated. Invar36 alloy wire is used as a transmission line core material, and is required to have high strength. The diameter of the Invar36 alloy wire specimens were reduced from 16 mm to 4.3 mm after three cold drawing and two heat treatment processes, thereby increasing tensile strength. Specimens were taken after each of the cold drawing and heat treatment processes, and their microstructure and tensile properties were analyzed. The Invar36 alloy wire had a -(Fe, Ni) phase matrix before the cold drawing and heat treatment processes. After the cold drawing processes, {220} and {200} textures were mainly achieved. After the heat treatment processes, a {220} recrystallization -(Fe, Ni) phase was formed with fine carbides. The recrystallization -(Fe, Ni) phase grains had low dislocation density, so they probably accommodated a large amount of deformation during the cold drawing processes.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Metallurgy and Material Forming · Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.