Evolution of the Solidification Microstructures in Directionally Solidified CM247LC Rod
Source abstract
Abstract
Directional solidification of CM247LC was performed at a constant growth velocity (300 mm/h) using a Bridgman type furnace. Microstructural features, including the number of grains, PDAS, and EBSD IPF map, were investigated with progressive positions from the starter block. As directional solidification proceeded, the number of grains decreased and PDAS increased. These results indicate that the thermal gradient decreases with distance from the starter block. Thermal gradient changes were estimated by dendrite spacing change in the directionally solidified rod. The EBSD IPF map showed that almost all of the grains were close to the <001> preferred direction, but with heights of about 300 mm from the starter block, some grains at the center of the specimen exhibited quite different crystallographic directions near the gate instead of the preferred direction.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Metallurgy and Material Forming · Metallurgical Processes and Thermodynamics · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.