Effects of Jetting Parameters and Sodium Silicate-Based Binder on Droplet Formation
Source abstract
Abstract
Binder jetting additive manufacturing is one of the 3D printing technologies currently used to manufacture 3D geometries. In this process, a liquid binder agent is ejected to a desired position of a substrate. The binder’s properties and the jetting condition used for form droplets can affect the formability of the geometries. Herein, we optimized the solid content and jetting condition of a sodium silicate-based inorganic binder, for 3D printing. To observe the range of single droplet formation, the behavior of the discharged droplets was analyzed by Z value, which is the inverse of the Ohnesorge number. As the solid content increased, a higher driving voltage was required to form the droplets to overcome viscous dissipation. For 40S(Z = 4.33) with a content of 40 wt%, the droplet tail from the nozzle was stretched further. The droplets of 25S(Z = 15.09) with a content of 25 wt% were accompanied by satellite droplets. The jetting condition was optimized for 25S, which was capable of ejection at various driving voltages. Stable single droplets were formed at a driving voltage of 20 V and a dwell time of 4 μs. In addition, when ethylene glycol and glycerol were added into 25S as a humectant, stable droplets were formed under the optimum jetting condition, and each droplets was in the range of 2.70 < Z < 15.09.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Modular Robots and Swarm Intelligence · Electrohydrodynamics and Fluid Dynamics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (15)
Show source-provided references
1. Hawaldar · 2018 · 1037
2. 10.1016/j.jmapro.2017.07.01710.1016/j.jmapro.2017.07.017 ↗
3. 10.1108/RPJ-08-2017-016810.1108/RPJ-08-2017-0168 ↗
4. 10.3365/KJMM.2019.57.4.22710.3365/KJMM.2019.57.4.227 ↗
5. 10.1108/RPJ-10-2016-016110.1108/RPJ-10-2016-0161 ↗
6. Snelling · 2014
7. Ramakrishnan · 2014 · 441
8. 10.1017/jfm.2018.25110.1017/jfm.2018.251 ↗
9. 10.1557/PROC-625-11710.1557/PROC-625-117 ↗
10. 10.1109/JMEMS.2015.243395510.1109/JMEMS.2015.2433955 ↗
11. 10.1063/1.366361610.1063/1.3663616 ↗
12. 10.1021/la900059m10.1021/la900059m ↗
13. Polzin · 2014
14. 10.3365/KJMM.2018.56.1.7210.3365/KJMM.2018.56.1.72 ↗
15. 10.1002/978352768472410.1002/9783527684724 ↗