journal article·2014-06-05

Effects of Nitrogen Partial Pressures During RF Magnetron Sputtering on the Crystal Structure and Growth Rate of c-BN Films

Se hoon Jeong, Joon hang Lee, Kwang min Lee

Publisher page

Abstract

The type of atmospheric gases used in sputtering deposition is an important factor in the formation of cubic boron nitride (c-BN) films. All of the c-BN films were deposited on a Si wafer using radio frequency (r.f.) magnetron sputtering with a B4C target at N2/Ar+N2 ratios of 0.2, 0.4, 0.6, 0.8 and 1.0. The characteristics of the c-BN layer were significantly enhanced at a nitrogen partial pressure of 0.6. The highest growth rate of the c-BN layer was measured at 11.6 (nm/min) at a nitrogen partial pressure of 0.6.The lowest surface roughness was obtained at a nitrogen partial pressure of 0.6 when the BCN gradient layer was clearly deposited. According to the XPS results, the c-BN phase structure improved while the BCN gradient layer was clearly observed. Overall, the growth rate, surface roughness and crystal structure of the c-BN films are significantly affected under certain atmospheric gas conditions such as at a nitrogen partial pressure of 0.6.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Boron and Carbon Nanomaterials Research · Metal and Thin Film Mechanics · Diamond and Carbon-based Materials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.