journal article·2021-06-05Open access

Correlation between the Microstructure and Mechanical Properties of W-Bearing Ti-6Al-4V Alloys

Godwin Kwame Ahiale, In-Seok Kye, Young Sam Kwon, Yong-Jun Oh

Abstract

W-containing Ti-6Al-4V alloys (W=0, 1, and 5 wt%) were fabricated by the powder injection molding process, and the corresponding effects of tungsten content on the mechanical properties and microstructure of the alloys were investigated. The alloy powders were sintered at 1200 °C and then hot-isostatically-pressed at 900 °C. The fabricated alloys were subjected to microstructural and chemical analyses, and tensile and nano-indentation tests. The yield strength and tensile strength proportionally increased as the W content was increased from 0 wt% to 5 wt%. Ductility was not affected by the addition of up to 5 wt% W due to its complete dissolution in the matrix. Higher W addition induced finer α/β lamellar microstructures and increased the β to α phase ratio. Moreover, the added W dissolved preferentially in the β phase by solid solution hardening, increasing the hardness of the β phase, which originally was significantly softer than the α phase. For the alloys containing up to 5 wt% W, the strengthening without ductility loss was attributed to the finer α/β lamellae and the volume increase in the β phase hardened by W. These results suggest that adding W to Ti-6Al-4V alloy is a promising method for developing Ti alloys with both high strength and toughness.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Titanium Alloys Microstructure and Properties · Advanced materials and composites · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. 10.1016/S0921-5093(98)01180-010.1016/S0921-5093(98)01180-0 ↗
2. 10.1007/s11837-008-0031-110.1007/s11837-008-0031-1 ↗
3. 10.1016/0921-5093(96)10233-110.1016/0921-5093(96)10233-1 ↗
4. 10.1002/adem.20031009510.1002/adem.200310095 ↗
5. 10.1016/j.actamat.2012.10.04310.1016/j.actamat.2012.10.043 ↗
6. 10.1016/j.jallcom.2009.06.17210.1016/j.jallcom.2009.06.172 ↗
7. 10.1016/S0142-1123(97)00113-810.1016/S0142-1123(97)00113-8 ↗
8. 10.1016/S0925-8388(01)01571-710.1016/S0925-8388(01)01571-7 ↗
9. 10.1016/j.jmatprotec.2003.12.02610.1016/j.jmatprotec.2003.12.026 ↗
10. 10.3365/KJMM.2019.57.7.41210.3365/KJMM.2019.57.7.412 ↗
11. 10.1007/s12540-019-00506-w10.1007/s12540-019-00506-w ↗
12. 10.1016/S0921-5093(97)00778-810.1016/S0921-5093(97)00778-8 ↗
13. 10.1063/1.499333510.1063/1.4993335 ↗
14. Wegmann · 1997 · 764
15. 10.1007/978-3-540-71398-2_710.1007/978-3-540-71398-2_7 ↗
16. 10.1016/S0921-5093(01)01858-510.1016/S0921-5093(01)01858-5 ↗
17. 10.1016/j.scriptamat.2008.05.00210.1016/j.scriptamat.2008.05.002 ↗
18. 10.1016/S0921-5093(02)00102-810.1016/S0921-5093(02)00102-8 ↗
19. Anis · 2016 · 2577
20. 10.1016/j.msea.2005.01.05110.1016/j.msea.2005.01.051 ↗
21. 10.1016/S0921-5093(02)00426-410.1016/S0921-5093(02)00426-4 ↗
22. 10.1111/j.0022-2720.2004.01321.x10.1111/j.0022-2720.2004.01321.x ↗
23. 10.1016/j.msea.2003.12.00810.1016/j.msea.2003.12.008 ↗
24. 10.1016/j.jallcom.2012.07.02210.1016/j.jallcom.2012.07.022 ↗
25. El-Bagoury · 2016 · 517
26. Zhao · 2017
27. Gammon · 2004 · 899
28. 10.1007/s11661-006-0028-810.1007/s11661-006-0028-8 ↗
29. 10.1016/S0921-5093(00)02003-710.1016/S0921-5093(00)02003-7 ↗
30. 10.1007/s11661-003-0013-410.1007/s11661-003-0013-4 ↗
31. 10.1093/rb/rbw01610.1093/rb/rbw016 ↗
32. 10.3390/ma1305121010.3390/ma13051210 ↗