Effect of Anodic Oxidation Process Parameters on TiO2 Nanotube Formation in Ti-6Al-4V Alloys
Source abstract
Abstract
To investigate the effect of anodic oxidation process parameters on TiO 2 nanotube formation in Ti-6Al-4V alloys, the composition of NH 4 F and H 2 O in the anodic oxidation processes were changed under the conditions of constant DC power ranging from 20 V to 60V and current density ranging from 10 mA to 30 mA. As the amount of NH 4 F was increased, the surface reaction rate became faster and surface dissolution also became more active. This result can be explained by the fact that TiO 2 nanotubes were basically formed in the TiO 2 layer located in the front of the Ti matrix by selective dissolution of the oxide layer, due to F - ions existing in the electrolytes. In anodic oxidation in ethylene glycol + 0.2 wt% NH 4 F with different amounts of water ranging from 0 ~ 8 vol%, the increase in the amount of water resulted in an increase in both the diameter and the length of growing nanotubes. When the voltage increased, the diameter and the length of the nanotubes tended to increase. But no nanotubes were formed at the voltage and the current density lower than a certain critical value. An increase in electrolytic holding time resulted in the diameter of the nanotubes increasing and decreasing repeatedly, but eventually increasing. X-ray analysis indicated that the as-grown nanotubes were amorphous while the anatase phase and the rutile phase were detected after anodic oxidation treatment, followed by annealing at 650 o C under Ar atmosphere for 2 hours.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Anodic Oxide Films and Nanostructures · Electrocatalysts for Energy Conversion · Advancements in Battery Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (16)
Show source-provided references
1. Shim · 2011 · 176
2. Seo · 2015 · 198
3. 10.1520/STP16077S10.1520/STP16077S ↗
4. 10.1021/la971381610.1021/la9713816 ↗
5. 10.1002/adma.20140200010.1002/adma.201402000 ↗
6. Choi · 2003 · 47
7. 10.1016/S0142-9612(01)00131-410.1016/S0142-9612(01)00131-4 ↗
8. 10.1016/j.biomaterials.2003.12.00210.1016/j.biomaterials.2003.12.002 ↗
9. 10.1016/S0006-291X(03)01165-310.1016/S0006-291X(03)01165-3 ↗
10. 10.1186/s12951-014-0054-410.1186/s12951-014-0054-4 ↗
11. 10.1002/(SICI)1096-9918(199907)27:7<629::AID-SIA551>3.0.CO;2-010.1002/(SICI)1096-9918(199907)27:7<629::AID-SIA551>3.0.CO;2-0 ↗
12. 10.1016/S0013-4686(99)00283-210.1016/S0013-4686(99)00283-2 ↗
13. 10.1149/2.0011511jes10.1149/2.0011511jes ↗
14. Choi · 2008 · 730
15. 10.1016/S0040-6090(96)09440-010.1016/S0040-6090(96)09440-0 ↗
16. 10.1002/anie.20046245910.1002/anie.200462459 ↗