article·2014-02-05

Improvement of the Reaction Rates of Mg with H2 by the Addition of TaF5 via Reactive Mechanical Grinding

Myoung Youp Song, Young Jun Kwak, Seong Ho Lee, Hye Ryoung Park

Publisher page

Abstract

A sample with a composition of 90 wt% Mg-10 wt% TaF5 (named Mg-10TaF5) was prepared by reactive mechanical grinding, and its hydriding and dehydriding properties were examined. The activation of Mg-10TaF5 was not required. At n=1, the sample absorbed 3.63 wt% H for 5 min, 4.03 wt% H for 10 min, and 4.53 wt% H for 30 min at 593 K under 12 bar H2. At n=1, the sample desorbed 0.59 wt% H for 5 min, 1.46 wt% H for 10 min, 3.42 wt% H for 30 min, and 4.24 wt% H for 60 min at 593 K under 1.0 bar H2. Mg-10TaF5 after reactive mechanical grinding contained MgH2, Mg, and very small amounts of MgF2 and Ta2H. The XRD pattern of Mg-10TaF5 dehydrided at n=3 revealed Mg, MgH2, a small amount of MgO, and very small amounts of MgF2 and Ta2H phases. Mg-10Fe2O3 and Mg-10MnO were reported to have quite high hydriding rate and dehydriding rates, respectively. Mg-10TaF5 had a larger initial hydriding rate but a lower quantity of hydrogen absorbed for 60 min than Mg-10Fe2O3. However, Mg-10TaF5 had a higher initial dehydriding rate (after the incubation period) and a larger quantity of hydrogen desorbed for 60 min than Mg-10MnO. †(Received April 29, 2013)
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Hydrogen Storage and Materials · Particle accelerators and beam dynamics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.