journal article·2017-10-05Open access

Hydrogen Embrittlement of Three High-Manganese Steels Tested by Different Hydrogen Charging Methods

Authors not provided

Abstract

In this study the hydrogen embrittlement characteristics of three high-manganese steels were tested using different hydrogen charging methods, and the results were compared with various Mn-containing steels. The results showed that the hydrogen embrittlement susceptibility of the high-manganese steels increased with increasing inherent strength because deformation mechanisms, such as deformation twinning, -martensite transformation, and shear-or micro-band formation, enhanced their sensitivity to hydrogen-induced cracking. The different hydrogen charging methods also affected their ability to achieve the critical hydrogen concentration needed for hydrogen-induced cracking under the stress fields of each microstructure. The relative reduction in ductility for different charging methods usually increased in the order of ex-situ electrochemically-charged, ex-situ high-pressure thermallycharged, and in-situ environment tensile testing, although it was somewhat dependent on the charging, testing and specimen conditions. Based on the results of the three high-manganese steels, it was found that the high-pressure thermally-charged steel specimens had higher relative reductions in ductility because a larger amount of hydrogen was uniformly injected into the steel specimens, which promoted hydrogen-induced cracking under smaller strain than that of the electrochemically-charged steel specimens.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Corrosion Behavior and Inhibition · Material Properties and Failure Mechanisms

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.