Growth Behavior of Intermetallic Compound in Dissimilar Al-Cu Joints Under Direct Current
Source abstract
Abstract
Aluminum conductors are increasingly replacing copper because Al has lower cost and lighter weight, and consequently the demand for Al-Cu joints for industrial applications is growing. However, an intermetallic compound is known to grow at the Al-Cu interface, and will result in fracture if it grows above a critical thickness. It has been reported that the thickness of this intermetallic compound layer significantly increases when alternating current flows through the Al-Cu interface. For long distance power transmission, direct current is preferred because it reduces energy losses. In the present study, the formation and growth of the intermetallic compound under direct current was investigated using FE-SEM and EPMA. The thickness of the intermetallic compound was measured and compared based on the direction of the electron flows. It was thus confirmed that under commercial conditions below 10A/mm 2 the electric current accelerates the growth of the intermetallic compound, with distinct effect from electromigration. In addition, an empirical equation to predict the thickness of the intermetallic compound was obtained, to estimate the life time of the Al-Cu joint.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Microstructure and mechanical properties · Solidification and crystal growth phenomena
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.