journal article·2022-09-05Open access

Mechanical and Microstructural Behaviors of Gas Tungsten Arc Dissimilar Metal Welds of High-Mn Steel and Stainless Steel 316L Using Various Fillers for Cryogenic Fuel Tanks

Chulho Cho, Seongkil Nam, Sunghoon Yu, Myeonghwan Choi, Namhyun Kang

Abstract

The gas tungsten arc (GTA) weldability of high-Mn (HMn) steel and austenitic stainless steel (STS) 316L using dissimilar metal welds (DMWs) was investigated, to fabricate a fuel tank for an LNG-fueled ship. Three types of welding fillers, HMn steel, STS 309LMo and Inconel 625, were applied to the DMWs. The weldability of the DMWs was examined by investigating mechanical properties at 25 and -196 o C, followed by microstructural evolution and weld deformation. The GTA welding process was performed with a heat input range of 0.72–1.89 kJ/mm. All of the fillers employed in the study produced reasonable mechanical properties and low levels of precipitation, such as M7C3 and Fe3C. However, the DN specimen using the Inconel 625 filler exhibited reduced ductility in the bending test. This was attributed to Nb-carbide precipitations at dendrite boundaries at the root weld. The DM specimen using HMn filler experienced severe thermal deformation because it had a relatively higher coefficient of thermal expansion than the other fillers during heating by arc and solidification. Therefore, STS 309LMo and HMn wires were determined to be the appropriate fillers for the DMW of HMn steel and STS 316L for cryogenic applications, and the HMn wire requires attention to weld deformation.
Source: openalex_inverted_index · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Welding Techniques and Residual Stresses · Microstructure and Mechanical Properties of Steels

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. Choi · 2020 · 1
2. 10.3390/met1112189910.3390/met11121899 ↗
3. 10.3390/met1112204710.3390/met11122047 ↗
4. Kim · 2012 · 504
5. Kang · 2022 · 9
6. Park · 2022 · 33
7. 10.1007/s12540-020-00785-810.1007/s12540-020-00785-8 ↗
8. 10.1007/s12540-019-00320-410.1007/s12540-019-00320-4 ↗
9. Jeong · 2010 · 36
10. Dahmen · 2016 · 344
11. 10.3390/met1109143910.3390/met11091439 ↗
12. Han · 2018 · 10
13. Han · 2016 · 77
14. Martinsen · 2015 · 557
15. Yang · 2020 · 400
16. Keil · 2011 · 209
17. Gowrisankar · 1987 · 147
18. Kim · 2016 · 69
19. Kosmac · 2012 · 37
20. Hidnert · 1957 · 89
21. Jun · 1997 · 93
22. Kusakin · 2016 · 326
23. Ono · 1998 · 67
24. Schmidova · 2016 · 749
25. Di · 2015 · 169
26. Curiel-Reyna · 2017 · 14
27. Klueh · 1988 · 115
28. 10.1007/s12540-019-00440-x10.1007/s12540-019-00440-x ↗
29. Llanos · 2015 · 5248
30. Hanninen · 2008 · 171
31. Mu · 2018 · 804