journal article·2017-07-05Open access

Acceleration of Nano-Sized NbC Precipitation and Improvement of Creep Resistance in Alumina-Forming Austenitic Stainless Steel via Cold Working

Authors not provided

Abstract

A feasibility study on microstructure design has been carried out to improve creep rupture life in alumina-forming austenitic (AFA) Fe-14Cr-20Ni-2.3Al stainless steel with and without 2 wt% W addition. After creep tests under 780 C/80 MPa conditions, it was observed that internal cracks initiated primarily from grain boundaries in the W-free steel while voids nucleating at primary coarse NbC carbides elongated into fractures in the W-added steel. This result indicates that the W addition shifts the fracture mode from intergranular to transgranular. Based on this observation, the fine intragranular NbC carbides, which need to precipitate as much as possible during the initial stage of creep, can be a promising metallurgical factor for enhancing the creep resistance of both the AFA steels. Cold work at 5% strain prior to creep accelerated the heterogeneous precipitation of nano-sized intragranular NbC during the early stage of creep, which was responsible for the strong hardening effect by pinning the dislocations. The creep life was found to be 3 times longer as compared to the unpre-strained AFA steels. Applying 5% cold work induces the generation of dislocations in the matrix, which can lead to the nucleation of nano-scale NbC without recrystallization. The intragranular NbC carbide showed excellent resistance to coarsening during creep: their size was as small as around 30 nm after creep rupture.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: High Temperature Alloys and Creep · Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.