journal article·2017-05-05Open access

Effect of Annealing Temperature on the Microstructure, Tensile Properties, and Fracture Behavior of Cold-Rolled High-Mn Light-Weight Steels

Authors not provided

Abstract

The effects of the annealing temperature on the microstructure and tensile properties of cold-rolled light-weight steels are investigated using two Fe-30Mn-xAl-0.9C alloys that contain different Al content. The initial alloy microstructure is composed of a single austenite or a mixture of austenite and ferrite depending on the nominal aluminum content. For the alloy with 9 wt% Al content, the recrystallization and grain growth of austenite occurrs depending on the annealing temperature. However, for the alloy with 11 wt% Al content, the -Mn phase is observed after annealing for 10 min at 550~800 . The -Mn transformation kinetics is the fastest at 700 . The formation of the -Mn phase has a detrimental effect on the ductility, and this leads to significant decreases in the total elongation. The same alloy also forms -carbide and DO3 ordering at 550~900 . The investigated alloys exhibit a fully recrystallized microstructure after annealing at 900 for 10 min, which results in a high total elongation of 25~55% with a high tensile strength of 900~1170 MPa.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming · High-Velocity Impact and Material Behavior

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.