Investigation on the Secondary Reaction Zone Formation of Metallic Bond Coating Layer Produced by High Velocity Oxygen Fuel Deposition in a Ni-Based Single Crystal Superalloy
Source abstract
Abstract
The formation of the secondary reaction zone (SRZ) at the interface between the CoNiCrAlY coating and experimental Ni-based single crystal superalloy substrate was investigated. Transmission elec- tron microscope (TEM) observation revealed that the SRZ was composed of recrystallized γ΄ grains with a high density of fine topologically close-packed (TCP) precipitates. The TCP precipitate was identified as the faulted and twinned rhombohedral μ phase. TCP precipitation appears to be analogous to the discontinuous precipitation. The γ΄ grains nucleated epitaxially with grains in the coated layer. Preferential formation of the SRZ was observed along the direction. This anisotropy of SRZ formation may be essentially related to the preferential dislocation gliding direction where recrystallization would be most active due to high strain energy and the supply of fast interdiffusion pathways. Based on the suggested SRZ formation mechanism, the intermediate annealing is proposed to suppress SRZ formation in terms of mitigation of strain energy and interdiffusion. †(Received September 26, 2013)
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: High Temperature Alloys and Creep · High-Temperature Coating Behaviors · Advanced Materials Characterization Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.