Curing Behavior and Stacking Stability of Photocurable Si3N4 Slurries for DLP 3D Printing
Source abstract
Abstract
Digital light processing (DLP) 3D printing has emerged as a promising technique for fabricating highprecision ceramic components, including biomedical implants. However, achieving high-strength silicon nitride (Si3N4) spinal implants via DLP remains challenging due to slurry formulation constraints. This study optimizes the formulation of a photocurable Si3N4 slurry to enable DLP-based printing of spinal implant components. The effects of monomer composition and photoinitiator content on slurry viscosity and stability were evaluated. Slurries with only monomer A exhibited post-printing warpage, while those with only monomer B showed rapid polymerization shrinkage, causing delamination. In contrast, a 1:1 weight ratio blend of monomers A and B with 3 wt% photoinitiator (M-AB-3) maintained viscosity stability within 3% over 24 h and showed excellent shape fidelity. The flexural strength of the green body increased to 122 MPa when 8 wt% oligomer A was added, while viscosity rose to ~9,100 cP. A low-viscosity oligomer B was added to reduce viscosity. A formulation with 4 wt% oligomer A and 4 wt% oligomer B achieved optimal performance, with ~7,000 cP viscosity and 154 MPa green strength. Based on this optimized resin, ceramic solid loading was increased stepwise, and 66 wt% was determined to be the maximum printable content. Printed specimens were sintered under nitrogen (1800 ℃, 1 MPa), resulting in a relative density exceeding 99%, flexural strength of 1,070 MPa, Vickers hardness of 1,670 HV, and fracture toughness of 7.3 MPa·m1/2. These results confirm that the developed slurry enables stable high-solid loading and yields high-performance Si3N4 components suitable for spinal implant applications.
Source: openalex_inverted_index · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Nanofabrication and Lithography Techniques · Thin-Film Transistor Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. 10.3390/ceramics701000610.3390/ceramics7010006 ↗
2. 10.1016/j.jeurceramsoc.2018.11.01310.1016/j.jeurceramsoc.2018.11.013 ↗
3. 10.3365/kjmm.2025.63.7.50710.3365/kjmm.2025.63.7.507 ↗
4. Bose · 2024 · 68
5. Kim · 2023 · 27736
6. 10.21037/jss.2019.12.1110.21037/jss.2019.12.11 ↗
7. S. · 2012 · 2889
8. 10.1016/j.jmbbm.2024.10657910.1016/j.jmbbm.2024.106579 ↗
9. 10.3390/ijms2312655110.3390/ijms23126551 ↗
10. Wang · 2022 · 738
11. Zhou · 2022 · 4678
12. 10.1056/nejmsb03177110.1056/nejmsb031771 ↗
13. 10.1016/j.biomaterials.2005.07.01110.1016/j.biomaterials.2005.07.011 ↗
14. Rahaman · 2012 · 2358
15. Gorth · 2012 · 4829
16. Bock · 2016 · 871
17. Zhang · 2019 · 203
18. 10.1016/j.ceramint.2023.03.17510.1016/j.ceramint.2023.03.175 ↗
19. 10.1557/s43579-023-00444-010.1557/s43579-023-00444-0 ↗
20. Zhang · 2023 · 1009
21. 10.3390/polym1512271610.3390/polym15122716 ↗
22. 10.1063/1.36431110.1063/1.364311 ↗
23. 10.1016/j.oceram.2021.10005910.1016/j.oceram.2021.100059 ↗
24. 10.3390/pr1011246710.3390/pr10112467 ↗
25. 10.3390/ma1801016810.3390/ma18010168 ↗
26. 10.15541/jim2020070510.15541/jim20200705 ↗