journal article·2025-09-05Open access

Microstructure and Mechanical Properties of AA1050/AA6061 Layered Sheet Fabricated by Differential Strain Cold Roll-Bonding

Sang-hyeon Jo, Hyeon-Jun Heo, Hyo-Sang Yoo, Seong-Hee Lee

Abstract

A cold roll-bonding process using AA1050 and AA6061 sheets with different initial strain levels was applied to fabricate an AA1050/AA6061 layered sheet, which was subsequently annealed at various temperatures ranging from 200 to 400℃. The as-roll-bonded sheet exhibited a typical deformation structure in which the grains were elongated along the rolling direction. The evolution of the microstructure in the layered sheets varied significantly depending on the location, resulting in an inhomogeneous distribution of hardness along the thickness direction. After annealing at 200℃, the AA1050 region still exhibited a deformed structure; however, the AA6061 region, which had experienced a higher initial strain, showed partial recrystallization. While complete recrystallization occurred at temperatures above 350℃, microstructural heterogeneity across the thickness remained. This heterogeneity greatly affected the mechanical properties of the layered sheet. The specimen annealed at 350℃ exhibited the best mechanical properties in terms of the balance between tensile strength and elongation. In conventionally annealed specimens, strength typically decreases while ductility increases as the annealing temperature rises. However, in this study, the specimen annealed at 350℃ demonstrated superior strength and ductility compared to the one annealed at 300℃. The underlying reasons for this behavior are discussed in detail.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Additive Manufacturing and 3D Printing Technologies · Metal Forming Simulation Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (53)

Show source-provided references
1. 10.1038/nature0113310.1038/nature01133 ↗
2. 10.1016/s0921-5093(02)00709-810.1016/s0921-5093(02)00709-8 ↗
3. 10.2320/matertrans.44.137610.2320/matertrans.44.1376 ↗
4. 10.1016/j.jnucmat.2005.03.02310.1016/j.jnucmat.2005.03.023 ↗
5. 10.1016/j.matlet.2007.07.06810.1016/j.matlet.2007.07.068 ↗
6. 10.1016/j.commatsci.2008.11.01910.1016/j.commatsci.2008.11.019 ↗
7. 10.1016/j.engfracmech.2010.07.01010.1016/j.engfracmech.2010.07.010 ↗
8. 10.1016/j.jallcom.2013.04.17610.1016/j.jallcom.2013.04.176 ↗
9. 10.1016/j.engfracmech.2015.03.04510.1016/j.engfracmech.2015.03.045 ↗
10. 10.1016/j.applthermaleng.2015.03.07010.1016/j.applthermaleng.2015.03.070 ↗
11. 10.1016/j.actamat.2014.09.05710.1016/j.actamat.2014.09.057 ↗
12. 10.1016/j.actamat.2015.10.03010.1016/j.actamat.2015.10.030 ↗
13. 10.1016/j.commatsci.2016.06.01010.1016/j.commatsci.2016.06.010 ↗
14. 10.1016/j.ijplas.2017.05.00910.1016/j.ijplas.2017.05.009 ↗
15. 10.1016/j.intermet.2018.03.00710.1016/j.intermet.2018.03.007 ↗
16. Jiang · 2018 · 226
17. 10.1016/j.msea.2018.05.00810.1016/j.msea.2018.05.008 ↗
18. 10.1016/j.msea.2008.01.09910.1016/j.msea.2008.01.099 ↗
19. 10.1016/s1359-6462(03)00283-510.1016/s1359-6462(03)00283-5 ↗
20. 10.1016/j.jmst.2020.09.00310.1016/j.jmst.2020.09.003 ↗
21. 10.1016/j.msea.2020.14072610.1016/j.msea.2020.140726 ↗
22. 10.1016/j.actamat.2005.11.04410.1016/j.actamat.2005.11.044 ↗
23. 10.1016/j.msea.2020.14006710.1016/j.msea.2020.140067 ↗
24. 10.1016/j.matdes.2020.10869510.1016/j.matdes.2020.108695 ↗
25. Zhu · 2020 · 139431
26. 10.1016/j.corsci.2016.09.01310.1016/j.corsci.2016.09.013 ↗
27. 10.1016/j.scriptamat.2007.06.03610.1016/j.scriptamat.2007.06.036 ↗
28. 10.1016/j.matchar.2020.11056810.1016/j.matchar.2020.110568 ↗
29. Utsunomiya · 2001 · 947
30. 10.1016/s0921-5093(01)01416-210.1016/s0921-5093(01)01416-2 ↗
31. 10.1016/s1359-6462(01)01239-810.1016/s1359-6462(01)01239-8 ↗
32. 10.3365/kjmm.2024.62.8.60210.3365/kjmm.2024.62.8.602 ↗
33. 10.3365/kjmm.2023.61.9.65210.3365/kjmm.2023.61.9.652 ↗
34. 10.3740/mrsk.2023.33.12.56510.3740/mrsk.2023.33.12.565 ↗
35. 10.3740/mrsk.2023.33.11.43910.3740/mrsk.2023.33.11.439 ↗
36. Jo · 2022 · 388
37. 10.3740/mrsk.2022.32.2.7210.3740/mrsk.2022.32.2.72 ↗
38. Jo · 2021 · 1
39. Jo · 2021 · 765
40. Lee · 2020 · 1093
41. 10.3740/mrsk.2019.29.6.39210.3740/mrsk.2019.29.6.392 ↗
42. 10.3740/mrsk.2016.26.7.38810.3740/mrsk.2016.26.7.388 ↗
43. 10.1016/j.msea.2017.10.06510.1016/j.msea.2017.10.065 ↗
44. Humphreys · 2004 · 3
45. 10.3365/kjmm.2023.61.7.53410.3365/kjmm.2023.61.7.534 ↗
46. 10.1016/j.matchar.2023.11284210.1016/j.matchar.2023.112842 ↗
47. 10.1016/s1359-6454(99)00457-710.1016/s1359-6454(99)00457-7 ↗
48. 10.1016/0001-6160(53)90006-610.1016/0001-6160(53)90006-6 ↗
49. 10.1016/j.jpcs.2019.05.04710.1016/j.jpcs.2019.05.047 ↗
50. Killen · 2009 · 19
51. 10.1088/0959-5309/56/3/30310.1088/0959-5309/56/3/303 ↗
52. 10.2514/1.c00021210.2514/1.c000212 ↗
53. Kim · 2010 · 146