Effect of Heat Treatment Temperature on Microstructure, Tensile Properties and δ-Precipitate Phase in Ni-based Superalloy
Source abstract
Abstract
Here, we investigated the influence of δ-precipitate (orthorhombic D0a Ni3Nb-ordered phase) on the room- and high-temperature tensile properties in wrought nickel-based Inconel 625 superalloys subjected to solution and aging heat treatment. Typically, solution heat-treatment temperatures in these alloys affect the solid-state precipitation of δ-phase, which governs high-temperature tensile properties. While precipitation of fine D0a δ-phase is known to have beneficial effects on the mechanical properties owing to the retardation of grain coarsening, Widmanstätten δ precipitation plays a deleterious influence on the fracture toughness, tensile ductility, and fatigue resistance. Therefore, to enhance the mechanical properties of this alloy series, it is key to generate a high number density of fine D0a δ precipitate by adjusting solid solution treatment temperatures. In this study, solution heat treatments were conducted above and below δ-phase solvus temperatures. By applying solution heat treatment at 900°C and 970°C, this alloy was confirmed to have a Widmanstätten δ phase and is composed similarly to the annealed microstructure. This Widmanstätten δ precipitate was densely distributed at both intergranular and intragranular grains. On the other hand, when solution treatment was applied at 1040 and 1100°C, more coarse particles (approximately 30 μm) with a significant reduction of Widmanstätten type δ phase were obtained. We found that grain size and Widmanstätten δ-phases have an important role in the high-temperature tensile properties of Inconel 625 superalloy series.
Source: openalex_inverted_index · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Temperature Alloys and Creep · Advanced Materials Characterization Techniques · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (17)
Show source-provided references
1. Floreen · 1994 · 13
2. Reed · 2006
3. Geddes · 2010
4. Donachie · 2002
5. 10.1007/s11661-017-4304-610.1007/s11661-017-4304-6 ↗
6. 10.3365/kjmm.2022.60.12.94010.3365/kjmm.2022.60.12.940 ↗
7. 10.1007/s11661-004-0057-010.1007/s11661-004-0057-0 ↗
8. 10.1007/s11661-014-2256-710.1007/s11661-014-2256-7 ↗
9. 10.1007/bf0264925910.1007/bf02649259 ↗
10. 10.1016/s0022-3115(00)00723-610.1016/s0022-3115(00)00723-6 ↗
11. Desvallees · 1994 · 281
12. Mahadevan · 2010 · 737
13. 10.1016/j.jallcom.2019.05.00110.1016/j.jallcom.2019.05.001 ↗
14. Medeiros · 2018 · 187
15. 10.1016/j.msea.2019.13832710.1016/j.msea.2019.138327 ↗
16. Kañetas · 2018 · 204
17. 10.1016/j.msea.2013.03.02110.1016/j.msea.2013.03.021 ↗