Effect of Heat Treatment on the Diffusion-Bonded Ni-Base Alloy Hastelloy X
Source abstract
Abstract
The effect of post-bond heat treatment (PBHT) on diffusion-bonded polycrystalline Ni-base alloy Hastelloy X (Ni-22Cr-18Fe-8Mo) was evaluated in this study. Diffusion bonding was conducted under a compressive pressure of 14 MPa in the temperature range of 1100-1200 . While (Cr,Mo)-rich and (Mo,Si)-rich precipitates were developed along the interface at 1100 , the precipitates were dissolved and grain boundary migration across the interface occurred above 1150 . As the dissolution of precipitates is related to the temperature rather than compressive pressure, a modified diffusion bonding condition (1120 /10 MPa) was applied. Brittle fracture with low tensile ductility was observed at the testing temperature of 700 , but substantial recovery of ductility was achieved up to a testing temperature of 900 through PBHT (1180 /1 h). The reduction of discontinuity at the interface was found to bring about the ductile behavior at high temperature.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Intermetallics and Advanced Alloy Properties · Advanced materials and composites · Metallurgical and Alloy Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.