journal article·2016-03-05

Enhancement of Hydrogen Storage Characteristics of Mg by Addition of Nickel and Niobium (V) Fluoride via Mechanical Alloying

Myoung Yeop Song, Young Jun Kwak, Seong Ho Lee, Hye Pyoung Park

Publisher page

Abstract

A specimen with a composition of 80 wt% Mg+14 wt% Ni+6 wt% NbF5 (termed Mg-Ni-NbF5) was prepared by mechanical alloying. Its hydrogen absorption and release characteristics were then examined. Mg2NiH4 was formed by a reaction of Mg with nickel and hydrogen during mechanical alloying and hydrogen absorption-release cycling. The particles after hydrogen absorption-release cycling became smaller than those after mechanical alloying owing to the expansion and contraction of the particles upon cycling. The cycled Mg-Ni-NbF5 had a fairly high hydrogen absorption rate and a large hydrogen storage capacity, with an effective hydrogen storage capacity close to 5.6 wt% at 593 K. The cycled Mg-Ni-NbF5 absorbed 5.58 wt% H in 12 bar H2 and released 4.81 wt% H in 1.0 bar H2 at 573 K for 60 min. At 593 K, the cycled specimen absorbed 4.53 wt% H for 5 min, 5.27 wt% H for 10 min, 5.50 wt% H for 25 min, and 5.58 wt% H for 60 min in 12 bar H2, and released 1.28 wt% H for 5 min, 2.26 wt% H for 10 min, 4.13 wt% H for 30 min, and 4.81 wt% H for 60 min in 1.0 bar H2.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Hydrogen Storage and Materials · Magnesium Alloys: Properties and Applications · Ammonia Synthesis and Nitrogen Reduction

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.