journal article·2026-01-10Open access

Exploring One-Dimensional Uniaxial Compression through a Granular Micromechanics Model

Nurettin Yilmaz, Luca Placidi, Anil Misra

KONA Powder and Particle Journal· Volume 43· Issue 0

Abstract

Uniaxial or one-dimensional compression is widely used in granular material processing to produce granular compacts and is a key experimental method for evaluating the compressibility of granular materials. In this study, the granular micromechanics approach (GMA) was applied to simulate the one-dimensional uniaxial compression behavior of granular packing. GMA offers a continuum modeling paradigm that connects the macroscale response to the grain-scale mechanisms. To describe the stiffening behavior that elasto-frictional granular materials exhibit in confined compression, the elastic energy functional and dissipation potential were modified from previous versions of GMA-based models. The elastic energy of a grain pair was formulated to include a higher-order dependence on the normal relative displacement of the grain pair. The dissipation potential was also modified by incorporating coupling between plastic parameters that characterize plastic deformation accumulation as the grain-pair experiences compression and/or tension during loading process. The modified model, derived in the framework of geometrically nonlinear deformations, was then applied to replicate experimentally measured 1D compression behavior of granular materials undergoing large compression. The results reveal nearly universal scaling with respect to the model parameters for predicting the behavior of granular materials composed of different particle types or initial density. A parametric study was conducted to determine the evolution of the microscale stored elastic energy and dissipation parameters in terms of grain-pair directions. In addition, this paper provides a brief literature review of experimental observations and modeling approaches related to powder compaction behavior.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Geotechnical and Geomechanical Engineering · Rock Mechanics and Modeling · Granular flow and fluidized beds

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Civil and Environmental Engineering, Florida International University, USA

Department of Engineering, Telematic University Pegaso, Italy

References (97)

Show source-provided references
1. Abali B.E., Müller W.H., Eremeyev V.A., Strain gradient elasticity with geometric nonlinearities and its computational evaluation, Mechanics of Advanced Materials and Modern Processes, 1 (2015) 1–11. https://doi.org/10.1186/s40759-015-0004-310.1186/s40759-015-0004-3 ↗
2. Abali B.E., Müller W.H., dell’Isola F., Theory and computation of higher gradient elasticity theories based on action principles, Archive of Applied Mechanics, 87 (9) (2017) 1495–1510. https://doi.org/10.1007/s00419-017-1266-510.1007/s00419-017-1266-5 ↗
3. Abali B.E., Yang H., Papadopoulos P., A computational approach for determination of parameters in generalized mechanics, in: Altenbach H., Müller W.H., Abali B.E. (Eds.), Higher Gradient Materials and Related Generalized Continua, Springer International Publishing, Cham, 2019, pp. 1–18, ISBN: 978-3030304065. https://doi.org/10.1007/978-3-030-30406-5_110.1007/978-3-030-30406-5_1 ↗
4. Aydin G., Sarar B.C., Yildizdag M.E., Abali B.E., Investigating infill density and pattern effects in additive manufacturing by characterizing metamaterials along the strain-gradient theory, Mathematics and Mechanics of Solids, 27(10) (2022) 2002–2016. https://doi.org/10.1177/1081286522110097810.1177/10812865221100978 ↗
5. Bandara K., Ranjith P., Rathnaweera T., Wanniarachchi W., Yang S., Crushing and embedment of proppant packs under cyclic loading: an insight to enhanced unconventional oil/gas recovery, Geoscience Frontiers, 12 (6) (2021) 100970. https://doi.org/10.1016/j.gsf.2020.02.01710.1016/j.gsf.2020.02.017 ↗
6. Barchiesi E., Misra A., Placidi L., Turco E., Granular micromechanics-based identification of isotropic strain gradient parameters for elastic geometrically nonlinear deformations, Journal of Applied Mathematics and Mechanics, 101 (11) (2021) e202100059. https://doi.org/10.1002/zamm.202100059
7. Bolton M., Nakata Y., Cheng Y., Micro- and macro-mechanical behaviour of DEM crushable materials, Géotechnique, 58 (6) (2008) 471–480. https://doi.org/10.1680/geot.2008.58.6.47110.1680/geot.2008.58.6.471 ↗
8. Campbell C.S., Rapid granular flows, Annual Review of Fluid Mechanics, 22 (1) (1990) 57–90. https://doi.org/10.1146/annurev.fl.22.010190.00042110.1146/annurev.fl.22.010190.000421 ↗
9. Carrera A., Coop M., Lancellotta R., Influence of grading on the mechanical behaviour of Stava tailings, Géotechnique, 61 (11) (2011) 935–946. https://doi.org/10.1680/geot.9.P.00910.1680/geot.9.P.009 ↗
10. Chang C., Hicher P.Y., An elasto-plastic model for granular materials with microstructural consideration, International Journal of Solids and Structures, 42 (14) (2005) 4258–4277. https://doi.org/10.1016/j.ijsolstr.2004.09.02110.1016/j.ijsolstr.2004.09.021 ↗
11. Chang C.S., Misra A., Theoretical and experimental study of regular packings of granules, Journal of Engineering Mechanics, 115 (4) (1989) 704–720. https://doi.org/10.1061/(ASCE)0733-9399(1989)115:4(704)10.1061/(ASCE)0733-9399(1989)115:4(704) ↗
12. Chang C.S., Sundaram S.S., Misra A., Initial moduli of particulated mass with frictional contacts, International Journal for Numerical and Analytical Methods in Geomechanics, 13 (6) (1989) 629–644. https://doi.org/10.1002/nag.161013060510.1002/nag.1610130605 ↗
13. Cheng Y., Nakata Y., Bolton M.D., Discrete element simulation of crushable soil, Geotechnique, 53 (7) (2003) 633–641. https://doi.org/10.1680/geot.2003.53.7.63310.1680/geot.2003.53.7.633 ↗
14. Chong S.H., Santamarina J.C., Soil compressibility models for a wide stress range, Journal of Geotechnical and Geoenvironmental Engineering, 142 (6) (2016) 06016003. https://doi.org/10.1061/(ASCE)GT.1943-5606.000148210.1061/(ASCE)GT.1943-5606.0001482 ↗
15. Chtourou H., Guillot M., Gakwaya A., Modeling of the metal powder compaction process using the cap model. Part I. Experimental material characterization and validation, International Journal of solids and Structures, 39 (4) (2002a) 1059–1075. https://doi.org/10.1016/S0020-7683(01)00255-410.1016/S0020-7683(01)00255-4 ↗
16. Chtourou H., Gakwaya A., Guillot M., Modeling of the metal powder compaction process using the cap model. Part II: Numerical implementation and practical applications, International Journal of Solids and Structures, 39 (4) (2002b) 1077–1096. https://doi.org/10.1016/S0020-7683(01)00256-610.1016/S0020-7683(01)00256-6 ↗
17. Chung Y., Lin C., Chou P., Hsiau S., Mechanical behaviour of a granular solid and its contacting deformable structure under uni-axial compression–Part I: joint DEM–FEM modelling and experimental validation, Chemical Engineering Science, 144 (2016) 404–420. https://doi.org/10.1016/j.ces.2015.11.02410.1016/j.ces.2015.11.024 ↗
18. Cil M.B., Alshibli K.A., 3D assessment of fracture of sand particles using discrete element method, Géotechnique Letters, 2 (3) (2012) 161–166. https://doi.org/10.1680/geolett.12.0002410.1680/geolett.12.00024 ↗
19. Cil M.B., Alshibli K.A., 3D evolution of sand fracture under 1D compression, Géotechnique, 64 (5) (2014) 351–364. https://doi.org/10.1680/geot.13.P.11910.1680/geot.13.P.119 ↗
20. Cocks A., Sinka I., Constitutive modelling of powder compaction–I. Theoretical concepts, Mechanics of Materials, 39 (4) (2007) 392–403. https://doi.org/10.1016/j.mechmat.2006.09.00310.1016/j.mechmat.2006.09.003 ↗
21. Cocks A.C., Constitutive modelling of powder compaction and sintering, Progress in Materials Science, 46 (3–4) (2001) 201–229. https://doi.org/10.1016/S0079-6425(00)00017-710.1016/S0079-6425(00)00017-7 ↗
22. Daouadji A., Hicher P.Y., Rahma A., An elastoplastic model for granular materials taking into account grain breakage, European Journal of Mechanics-A/Solids, 20 (1) (2001) 113–137. https://doi.org/10.1016/S0997-7538(00)01130-X10.1016/S0997-7538(00)01130-X ↗
23. de Bono J.P., McDowell G.R., Discrete element modelling of one-dimensional compression of cemented sand, Granular Matter, 16 (2014) 79–90. https://doi.org/10.1007/s10035-013-0466-010.1007/s10035-013-0466-0 ↗
24. dell’Isola F., Andreaus U., Placidi L., At the origins and in the vanguard of peridynamics, non-local and higher-gradient continuum mechanics: an underestimated and still topical contribution of Gabrio Piola, Mathematics and Mechanics of Solids, 20 (8) (2015) 887–928. https://doi.org/10.1177/108128651350981110.1177/1081286513509811 ↗
25. dell’Isola F., Eugster S.R., Fedele R., Seppecher P., Second-gradient continua: from Lagrangian to Eulerian and back, Mathematics and Mechanics of Solids, 27 (12) (2022) 2715–2750. https://doi.org/10.1177/1081286522107882210.1177/10812865221078822 ↗
26. dell’Isola F., Misra A., Principle of virtual work as foundational framework for metamaterial discovery and rational design, Comptes Rendus Mécanique, 351 (S3) (2023) 65–89. https://doi.org/10.5802/crmeca.15110.5802/crmeca.151 ↗
27. dell’Isola F., Seppecher P., Placidi L., Barchiesi E., Misra A., Least action and virtual work principles for the formulation of generalized continuum models, in: dell’Isola F., Steigmann D.J. (Eds.), Discrete and Continuum Models for Complex Metamaterials, Cambridge University Press, Cambridge, 2020, pp. 327–394, ISBN: 978-1107087736. https://doi.org/10.1017/9781316104262.01010.1017/9781316104262.010 ↗
28. Einav I., Breakage mechanics—Part I: theory, Journal of the Mechanics and Physics of Solids, 55 (6) (2007a)1274–1297. https://doi.org/10.1016/j.jmps.2006.11.00310.1016/j.jmps.2006.11.003 ↗
29. Einav I., Breakage mechanics—Part II: modelling granular materials, Journal of the Mechanics and Physics of Solids, 55 (6) (2007b) 1298–1320. https://doi.org/10.1016/j.jmps.2006.11.00410.1016/j.jmps.2006.11.004 ↗
30. Eremeyev V.A., Cazzani A., dell’Isola F., On nonlinear dilatational strain gradient elasticity, Continuum Mechanics and Thermodynamics, 33 (2021) 1429–1463. https://doi.org/10.1007/s00161-021-00993-610.1007/s00161-021-00993-6 ↗
31. Eremeyev V.A., dell’Isola F., Boutin C., Steigmann D., Linear pantographic sheets: existence and uniqueness of weak solutions, Journal of Elasticity, 132 (2018) 175–196. https://doi.org/10.1007/s10659-017-9660-310.1007/s10659-017-9660-3 ↗
32. Fabbrocino F., Carpentieri G., Three-dimensional modeling of the wave dynamics of tensegrity lattices, Composite Structures, 173 (2017) 9–16. https://doi.org/10.1016/j.compstruct.2017.03.10210.1016/j.compstruct.2017.03.102 ↗
33. Fedele R., Piola’s approach to the equilibrium problem for bodies with second gradient energies. Part I: first gradient theory and differential geometry, Continuum Mechanics and Thermodynamics, 34 (2) (2022a) 445–474. https://doi.org/10.1007/s00161-021-01064-610.1007/s00161-021-01064-6 ↗
34. Fedele R., Approach à la Piola for the equilibrium problem of bodies with second gradient energies. Part II: variational derivation of second gradient equations and their transport, Continuum Mechanics and Thermodynamics, 34 (5) (2022b) 1087–1111. https://doi.org/10.1007/s00161-022-01100-z10.1007/s00161-022-01100-z ↗
35. Fedele R., Placidi L., Fabbrocino F., A review of inverse problems for generalized elastic media: formulations, experiments, synthesis, Continuum Mechanics and Thermodynamics, 36 (2024) 1413–1453. https://doi.org/10.1007/s00161-024-01314-310.1007/s00161-024-01314-3 ↗
36. García X., Medina E.A., Hysteresis effects studied by numerical simulations: cyclic loading–unloading of a realistic sand model, Geophysics, 71 (2) (2006) F13–F20. https://doi.org/10.1190/1.218130910.1190/1.2181309 ↗
37. Giorgio I., dell’Isola F., Andreaus U., Misra A., An orthotropic continuum model with substructure evolution for describing bone remodeling: an interpretation of the primary mechanism behind Wolff’s law, Biomechanics and Modeling in Mechanobiology, 22 (6) (2023) 2135–2152. https://doi.org/10.1007/s10237-023-01755-w10.1007/s10237-023-01755-w ↗
38. Giorgio I., Hild F., Gerami E., dell’Isola F.,Misra A., Experimental verification of 2D Cosserat chirality with stretch-micro-rotation coupling in orthotropic metamaterials with granular motif, Mechanics Research Communications, 126 (2022) 104020. https://doi.org/10.1016/j.mechrescom.2022.10402010.1016/j.mechrescom.2022.104020 ↗
39. Goldhirsch I., Rapid granular flows, Annual Review of Fluid Mechanics, 35 (1) (2003) 267–293. https://doi.org/10.1146/annurev.fluid.35.101101.16111410.1146/annurev.fluid.35.101101.161114 ↗
40. Grande E., Milani G., Formisano A., Ghiassi B., Fabbrocino F., Bond behaviour of FRP strengthening applied on curved masonry substrates: numerical study, International Journal of Masonry Research and Innovation, 5(3) (2020) 303–320. https://doi.org/10.1504/IJMRI.2020.10798010.1504/IJMRI.2020.107980 ↗
41. Grindrod P.M., Heap M.J., Fortes A.D., Meredith P.G., Wood I.G., Trippetta F., Sammonds P.R., Experimental investigation of the mechanical properties of synthetic magnesium sulfate hydrates: Implications for the strength of hydrated deposits on Mars, Journal of Geophysical Research: Planets, 115 (E6) (2010). https://doi.org/10.1029/2009JE00355210.1029/2009JE003552 ↗
42. Güner F., Cora Ö.N., Sofuoğlu H., Numerical modeling of cold powder compaction using multi particle and continuum media approaches, Powder Technology, 271 (2015) 238–247. https://doi.org/10.1016/j.powtec.2014.11.00810.1016/j.powtec.2014.11.008 ↗
43. Hanley K.J., O’Sullivan C., Huang X., Particle-scale mechanics of sand crushing in compression and shearing using DEM, Soils and Foundations, 55 (5) (2015) 1100–1112. https://doi.org/10.1016/j.sandf.2015.09.01110.1016/j.sandf.2015.09.011 ↗
44. Harireche O., McDowell G., Discrete element modelling of cyclic loading of crushable aggreates, Granular Matter, 5 (2003) 147–151. https://doi.org/10.1007/s10035-003-0143-910.1007/s10035-003-0143-9 ↗
45. Hendron Jr A.J., The Behavior of Sand in One-Dimensional Compression, University of Illinois at Urbana-Champaign, 1963. accessed Oct 21 2025.
46. Jagota A., Dawson P., Jenkins J., An anisotropic continuum model for the sintering and compaction of powder packings, Mechanics of Materials, 7 (3) (1988) 255–269. https://doi.org/10.1016/0167-6636(88)90024-510.1016/0167-6636(88)90024-5 ↗
47. Jiang M., Li T., Hu H., Thornton C., DEM analyses of one-dimensional compression and collapse behaviour of unsaturated structural loess, Computers and Geotechnics, 60 (2014) 47–60. https://doi.org/10.1016/j.compgeo.2014.04.00210.1016/j.compgeo.2014.04.002 ↗
48. Lambe T.W., Whitman R.V., Soil Mechanics, John Wiley & Sons, 1991, ISBN: 978-0471511922.
49. Leuenberger H., Rohera B.D., Fundamentals of powder compression. I. The compactibility and compressibility of pharmaceutical powders, Pharmaceutical Research, 3 (1986) 12–22. https://doi.org/10.1023/A:101636461372210.1023/A:1016364613722 ↗
50. Mancusi G., Fabbrocino F., Feo L., Fraternali F., Size effect and dynamic properties of 2D lattice materials, Composites Part B: Engineering, 112 (2017) 235–242. https://doi.org/10.1016/j.compositesb.2016.12.02610.1016/j.compositesb.2016.12.026 ↗
51. McDowell G.R., de Bono J.P., On the micro mechanics of one-dimensional normal compression, Géotechnique, 63 (11) (2013) 895–908. https://doi.org/10.1680/geot.12.P.04110.1680/geot.12.P.041 ↗
52. Michrafy A., Ringenbacher D., Tchoreloff P., Modelling the compaction behaviour of powders: application to pharmaceutical powders, Powder Technology, 127 (3) (2002) 257–266. https://doi.org/10.1016/S0032-5910(02)00119-510.1016/S0032-5910(02)00119-5 ↗
53. Minh N., Cheng Y., A DEM investigation of the effect of particle-size distribution on one-dimensional compression, Géotechnique, 63 (1) (2013) 44–53. https://doi.org/10.1680/geot.10.P.05810.1680/geot.10.P.058 ↗
54. Misra A., Huang S., Micromechanical stress–displacement model for rough interfaces: effect of asperity contact orientation on closure and shear behavior, International Journal of Solids and Structures, 49 (1) (2012) 111–120. https://doi.org/10.1016/j.ijsolstr.2011.09.01310.1016/j.ijsolstr.2011.09.013 ↗
55. Misra A., Marangos O., Rock-joint micromechanics: relationship of roughness to closure and wave propagation, International Journal of Geomechanics, 11 (6) (2011) 431–439. https://doi.org/10.1061/(ASCE)GM.1943-5622.000002110.1061/(ASCE)GM.1943-5622.0000021 ↗
56. Misra A., Placidi L., dell’Isola F., Barchiesi E., Identification of a geometrically nonlinear micromorphic continuum via granular micromechanics, Zeitschrift für angewandte Mathematik und Physik, 72 (2021) 157. https://doi.org/10.1007/s00033-021-01587-710.1007/s00033-021-01587-7 ↗
57. Misra A., Poorsolhjouy P., Elastic behavior of 2D grain packing modeled as micromorphic media based on granular micromechanics, Journal of Engineering Mechanics, 143 (1) (2017) C4016005. https://doi.org/10.1061/(ASCE)EM.1943-7889.000106010.1061/(ASCE)EM.1943-7889.0001060 ↗
58. Misra A., Yang Y., Micromechanical model for cohesive materials based upon pseudo-granular structure, International Journal of Solids and Structures, 47 (21) (2010) 2970–2981. https://doi.org/10.1016/j.ijsolstr.2010.07.00210.1016/j.ijsolstr.2010.07.002 ↗
59. Mohan S., Compression physics of pharmaceutical powders: a review, International Journal of Pharmaceutical Sciences and Research, 3 (06) (2012) 1580–1592. https://doi.org/10.13040/IJPSR.0975-8232.3(6).1580-92
60. Monkul M.M., Ozden G., Compressional behavior of clayey sand and transition fines content, Engineering Geology, 89 (3–4) (2007) 195–205. https://doi.org/10.1016/j.enggeo.2006.10.00110.1016/j.enggeo.2006.10.001 ↗
61. Nakata Y., Kato Y., Hyodo M., Hyde A.F., Murata H., One-dimensional compression behaviour of uniformly graded sand related to single particle crushing strength, Soils and Foundations, 41 (2) (2001) 39–51. https://doi.org/10.3208/sandf.41.2_3910.3208/sandf.41.2_39 ↗
62. Niesz D.E., A review of ceramic powder compaction, KONA Powder and Particle Journal, 14 (1996) 44–51. https://doi.org/10.14356/kona.199600910.14356/kona.1996009 ↗
63. Onate E., Rojek J., Combination of discrete element and finite element methods for dynamic analysis of geomechanics problems, Computer Methods in Applied Mechanics and Engineering, 193 (27–29) (2004) 3087–3128. https://doi.org/10.1016/j.cma.2003.12.05610.1016/S0045-7825(04)00121-5 ↗
64. Park S.J., Han H.N., Oh K.H., Lee D.N., Model for compaction of metal powders, International Journal of Mechanical Sciences, 41 (2) (1999) 121–141. https://doi.org/10.1016/S0020-7403(98)00022-810.1016/S0020-7403(98)00022-8 ↗
65. Pastor M., Zienkiewicz O., Chan A., Generalized plasticity and the modelling of soil behaviour, International Journal for Numerical and Analytical Methods in Geomechanics, 14 (3) (1990) 151–190. https://doi.org/10.1002/nag.161014030210.1002/nag.1610140302 ↗
66. Placidi L., A variational approach for a nonlinear one-dimensional damage-elasto-plastic second-gradient continuum model, Continuum Mechanics and Thermodynamics, 28 (2016) 119–137. https://doi.org/10.1007/s00161-014-0405-210.1007/s00161-014-0405-2 ↗
67. Placidi L., Barchiesi E., dell’Isola F., Maksimov V., Misra A., Rezaei N., Scrofani A., Timofeev D., On a hemi-variational formulation for a 2D elasto-plastic-damage strain gradient solid with granular microstructure, Mathematics in Engineering, 5 (1) (2022a) 1–24. https://dx.doi.org/10.3934/mine.202302110.3934/mine.2023021 ↗
68. Placidi L., Barchiesi E., Misra A., Timofeev D., Micromechanics-based elasto-plastic–damage energy formulation for strain gradient solids with granular microstructure, Continuum Mechanics and Thermodynamics, 33(5) (2021) 2213–2241. https://doi.org/10.1007/s00161-021-01023-110.1007/s00161-021-01023-1 ↗
69. Placidi L., dell’Isola F., Kandalaft A., Luciano R., Majorana C., Misra A., A granular micromechanic-based model for ultra high performance fiber-reinforced concrete (UHP FRC), International Journal of Solids and Structures, 297 (2024) 112844. https://doi.org/10.1016/j.ijsolstr.2024.11284410.1016/j.ijsolstr.2024.112844 ↗
70. Placidi L., Timofeev D., Maksimov V., Barchiesi E., Ciallella A., Misra A., dell’Isola F., Micro-mechano-morphology-informed continuum damage modeling with intrinsic 2nd gradient (pantographic) grain–grain interactions, International Journal of Solids and Structures, 254–255 (2022b) 111880. https://doi.org/10.1016/j.ijsolstr.2022.11188010.1016/j.ijsolstr.2022.111880 ↗
71. Ramaglia G., Lignola G.P., Fabbrocino F., Prota A., Numerical investigation of masonry strengthened with composites, Polymers, 10 (3) (2018) 334. https://doi.org/10.3390/polym1003033410.3390/polym10030334 ↗
72. Ransing R., Gethin D., Khoei A., Mosbah P., Lewis R., Powder compaction modelling via the discrete and finite element method, Materials & Design, 21 (4) (2000) 263–269. https://doi.org/10.1016/S0261-3069(99)00081-310.1016/S0261-3069(99)00081-3 ↗
73. Reccia E., Eremeyev V.A., On nonlinear rheology of masonries and granular media, International Journal of Engineering Science, 198 (2024) 104053. https://doi.org/10.1016/j.ijengsci.2024.10405310.1016/j.ijengsci.2024.104053 ↗
74. Richard P., Nicodemi M., Delannay R., Ribiere P., Bideau D., Slow relaxation and compaction of granular systems, Nature Materials, 4 (2) (2005) 121–128. https://doi.org/10.1038/nmat130010.1038/nmat1300 ↗
75. Roscoe K.H., Burland J.B., On the generalized stress-strain behaviour of wet clay, in: J. Heyman, F. Leckie (Eds.), Engineering Plasticity, Cambridge University Press, Cambridge, UK, (1968), pp. 535–609, ISBN: 978-0521052542.
76. Russell A.R., A compression line for soils with evolving particle and pore size distributions due to particle crushing, Géotechnique Letters, 1 (1) (2011) 5–9. https://doi.org/10.1680/geolett.10.0000310.1680/geolett.10.00003 ↗
77. Sarar B.C., Yildizdag M.E., Abali B.E., Comparison of homogenization techniques in strain gradient elasticity for determining material parameters, in: Altenbach H., Berezovski A., dell’Isola F., Porubov A. (Eds.), Sixty Shades of Generalized Continua, Advanced Structured Materials, Springer, Cham, 2023, pp. 631–644, ISBN: 978-3031261862. https://doi.org/10.1007/978-3-031-26186-2_3910.1007/978-3-031-26186-2_39 ↗
78. Sethi G., Myers N., German R.M., An overview of dynamic compaction in powder metallurgy, International Materials Reviews, 53 (4) (2008) 219–234. https://doi.org/10.1179/174328008X30969010.1179/174328008X309690 ↗
79. Sinka C., Modelling powder compaction, KONA Powder and Particle Journal, 25 (2007) 4–22. https://doi.org/10.14356/kona.200700510.14356/kona.2007005 ↗
80. Stilz M., dell’Isola F., Giorgio I., Eremeyev V.A., Ganzenmüller G., Hiermaier S., Continuum models for pantographic blocks with second gradient energies which are incomplete, Mechanics Research Communications, 125 (2022) 103988. https://doi.org/10.1016/j.mechrescom.2022.10398810.1016/j.mechrescom.2022.103988 ↗
81. Suescun-Florez E., Roslyakov S., Iskander M., Baamer M., Geotechnical properties of BP-1 lunar regolith simulant, Journal of Aerospace Engineering, 28 (5) (2015) 04014124. https://doi.org/10.1061/(ASCE)AS.1943-5525.000046210.1061/(ASCE)AS.1943-5525.0000462 ↗
82. Tahir S., Ariffin A., Fracture in metal powder compaction, International Journal of Solids and Structures, 43 (6) (2006) 1528–1542. https://doi.org/10.1016/j.ijsolstr.2005.10.01010.1016/j.ijsolstr.2005.10.010 ↗
83. Timofeev D., Barchiesi E., Misra A., Placidi L., Hemi-variational continuum approach for granular solids with damage-induced anisotropy evolution, Mathematics and Mechanics of Solids, 26(5) (2021) 738–770. https://doi.org/10.1177/108128652096814910.1177/1081286520968149 ↗
84. Villard P., Chevalier B., Le Hello B., Combe G., Coupling between finite and discrete element methods for the modelling of earth structures reinforced by geosynthetic, Computers and Geotechnics, 36 (5) (2009) 709–717. https://doi.org/10.1016/j.compgeo.2008.11.00510.1016/j.compgeo.2008.11.005 ↗
85. Vogler T., Lee M., Grady D., Static and dynamic compaction of ceramic powders, International Journal of Solids and Structures, 44 (2) (2007) 636–658. https://doi.org/10.1016/j.ijsolstr.2006.05.00110.1016/j.ijsolstr.2006.05.001 ↗
86. Wiącek J., Parafiniuk P., Stasiak M., Effect of particle size ratio and contribution of particle size fractions on micromechanics of uniaxially compressed binary sphere mixtures, Granular Matter, 19 (2017) 34. https://doi.org/10.1007/s10035-017-0719-410.1007/s10035-017-0719-4 ↗
87. Wu C.Y., Hancock B., Mills A., Bentham A., Best S., Elliott J., Numerical and experimental investigation of capping mechanisms during pharmaceutical tablet compaction, Powder Technology, 181 (2) (2008) 121–129. https://doi.org/10.1016/j.powtec.2006.12.01710.1016/j.powtec.2006.12.017 ↗
88. Wu C.Y., Ruddy O., Bentham A., Hancock B., Best S., Elliott J., Modelling the mechanical behaviour of pharmaceutical powders during compaction, Powder Technology, 152 (1–3) (2005) 107–117. https://doi.org/10.1016/j.powtec.2005.01.01010.1016/j.powtec.2005.01.010 ↗
89. Wu M., Wang J., Zhao B., DEM modeling of one-dimensional compression of sands incorporating statistical particle fragmentation scheme, Canadian Geotechnical Journal, 59(1) (2022) 144–157. https://doi.org/10.1139/cgj-2020-030810.1139/cgj-2020-0308 ↗
90. Wu Y., Yamamoto H., Izumi A., Experimental investigation on crushing of granular material in one-dimensional test, Periodica Polytechnica Civil Engineering, 60 (1) (2016) 27–36. https://doi.org/10.3311/PPci.802810.3311/PPci.8028 ↗
91. Xu M., Song E., Cao G., Compressibility of broken rock-fine grain soil mixture, Geomechanics and Engineering, 1 (2) (2009) 169–178. https://doi.org/10.12989/gae.2009.1.2.16910.12989/gae.2009.1.2.169 ↗
92. Yamamuro J.A., Bopp P.A., Lade P.V., One-dimensional compression of sands at high pressures, Journal of Geotechnical Engineering, 122 (2) (1996) 147–154. https://doi.org/10.1061/(ASCE)0733-9410(1996)122:2(147)10.1061/(ASCE)0733-9410(1996)122:2(147) ↗
93. Yang H., Abali B.E., Timofeev D., Müller W.H., Determination of metamaterial parameters by means of a homogenization approach based on asymptotic analysis, Continuum Mechanics and Thermodynamics, 32 (2020) 1251–1270. https://doi.org/10.1007/s00161-019-00837-410.1007/s00161-019-00837-4 ↗
94. Yildizdag M.E., Placidi L., Turco E., Modeling and numerical investigation of damage behavior in pantographic layers using a hemivariational formulation adapted for a Hencky-type discrete model, Continuum Mechanics and Thermodynamics, 35 (2023) 1481–1494. https://doi.org/10.1007/s00161-022-01154-z10.1007/s00161-022-01154-z ↗
95. Yilmaz N., Placidi L., Misra A., Fabbrocino F., A parametric study on a granular micromechanics continuum-based hemivariational approach: unraveling the emergence of critical states in granular materials, Mathematics and Mechanics of Complex Systems, 13(1) (2025) 25–54. https://doi.org/10.2140/memocs.2025.13.2510.2140/memocs.2025.13.25 ↗
96. Yilmaz N., Yildizdag M.E., Fabbrocino F., Placidi L., Misra A., Emergence of critical state in granular materials using a variationally-based damage-elasto-plastic micromechanical continuum model, International Journal for Numerical and Analytical Methods in Geomechanics, 48(13) (2024) 3369–3391. https://doi.org/10.1002/nag.379510.1002/nag.3795 ↗
97. Zhou B., Wang J., Wang H., A new probabilistic approach for predicting particle crushing in one-dimensional compression of granular soil, Soils and Foundations, 54 (4) (2014) 833–844. https://doi.org/10.1016/j.sandf.2014.06.01410.1016/j.sandf.2014.06.014 ↗