Influence of Particle Elongation and Aspect Ratio on the Discharge Behavior of a Flat-Bottom Silo
Source abstract
Abstract
Silos are widely used structures designed with hoppers or as flat bottoms to store different types of particulate materials (pellets, grains, powders, etc.). Although they have been used in industry for a long-time, further research is needed. This article provides design recommendations that prevent structural failures and ensure efficient discharge. The discrete element method (DEM) has been commonly used in recent decades in silo/bin research to simulate the behavior of stored materials. In this study, DEM was used to investigate the relationship between the slot width and particle size on the discharge behavior in a flat-bottom silo using particle shape configurations with different elongations and aspect ratios. Sixteen DEM models were developed using the multi-sphere approach to obtain the particle configurations, ranging from single spheres to 4×4×4 clusters of spheres arranged along orthogonal axes (x, y, and z). The simulations involved between 459 and 29,383 particles with a total mass of 40 kg in each model. The established comparisons include information on the bulk density, velocity profiles, residual masses, and discharge rates.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: High voltage insulation and dielectric phenomena · Electrostatics and Colloid Interactions · Enhanced Oil Recovery Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Mechanical, Chemical, and Industrial Design Engineering, Universidad Politécnica de Madrid, Spain
Safety and Quality in Energy and Mining Industries Technology Centre (TECMINERGY), Spain
References (15)
Show source-provided references
1. Alonso-Marroquín F., Ramírez-Gómez Á., González-Montellano C., Balaam N., Hanaor D.A.H., Flores-Johnson E.A., Gan Y., Chen S., Shen L., Experimental and numerical determination of mechanical properties of polygonal wood particles and their flow analysis in silos, Granular Matter, 15 (2013) 811–826. https://doi.org/10.1007/s10035-013-0443-710.1007/s10035-013-0443-7 ↗
2. Bharadwaj R., Ketterhagen W.R., Hancock B.C., Discrete element simulation study of a Freeman powder rheometer, Chemical Engineering Science, 65 (2010) 5747–5756. https://doi.org/10.1016/j.ces.2010.04.00210.1016/j.ces.2010.04.002 ↗
3. Brown R.L., Richards J.C., Kinematics of the flow of dry powders and bulk solids, Rheologica Acta, 4 (1965) 153–165. https://doi.org/10.1007/BF0196925110.1007/BF01969251 ↗
4. Cundall P.A., Strack O.D.L., A discrete numerical model for granular assemblies, Géotechnique, 29 (1979) 47–65. https://doi.org/10.1680/geot.1979.29.1.4710.1680/geot.1979.29.1.47 ↗
5. EDEM 2022.3, User Guide, Edinburgh, Scotland, UK: DEM Solutions, Ltd., 2023. https://2022.help.altair.com/2022.3/EDEM/Introducing_EDEM.htm
6. Favier J.F., Abbaspour-Fard M.H., Kremer M., Raji A.O., Shape representation of axi-symmetrical non-spherical particles in discrete element simulation using multi-element model particles, Engineering Computations, 16 (1999) 467–480. https://doi.org/10.1108/0264440991027189410.1108/02644409910271894 ↗
7. González-Montellano C., Gallego E., Ramírez-Gómez Á., Ayuga F., Three dimensional discrete element models for simulating the filling and emptying of silos: Analysis of numerical results, Computers & Chemical Engineering, 40 (2012) 22–32. https://doi.org/10.1016/j.compchemeng.2012.02.00710.1016/j.compchemeng.2012.02.007 ↗
8. Gelnar D., Zegzulka J., Discrete Element Method in the Design of Transport Systems: Verification and Validation of 3D Models, Springer International Publishing, Cham, 2019, ISBN: 978-3-030-05712-1. https://doi.org/10.1007/978-3-030-05713-810.1007/978-3-030-05713-8_1 ↗
9. Horabik J., Parafiniuk P., Wiącek J., Kobyłka R., Molenda M., Stasiak M., DEM modelling of the influence of initial stress state on the discharge rate of spherical particles from a model silo, Powder Technology, 403 (2022) 117402. https://doi.org/10.1016/j.powtec.2022.11740210.1016/j.powtec.2022.117402 ↗
10. Langmaid R.N., Rose H.E., Arch formation in a non-cohesive granular material, Journal of Institute of Fuel, 30 (1957) 166–172.
11. Nedderman R.M., Tüzün U., Savage S.B., Houlsby G.T., The flow of granular materials—I: Discharge rates from hoppers, Chemical Engineering Science, 37 (1982) 1597–1609. https://doi.org/10.1016/0009-2509(82)80029-810.1016/0009-2509(82)80029-8 ↗
12. Radvilaitė U., Ramírez-Gómez Á., Kačianauskas R., Determining the shape of agricultural materials using spherical harmonics, Computers and Electronics in Agriculture, 128 (2016) 160–171. https://doi.org/10.1016/j.compag.2016.09.00310.1016/j.compag.2016.09.003 ↗
13. Ramírez A., Nielsen J., Ayuga F., On the use of plate-type normal pressure cells in silos: part 2: validation for pressure measurements, Computers and Electronics in Agriculture, 71 (2010) 64–70. https://doi.org/10.1016/j.compag.2009.12.00510.1016/j.compag.2009.12.005 ↗
14. Ramírez-Gómez Á., The discrete element method in silo/bin research. Recent advances and future trends, Particulate Science and Technology, 38 (2020) 210–227. https://doi.org/10.1080/02726351.2018.153609310.1080/02726351.2018.1536093 ↗
15. Žurovec D., Hlosta J., Nečas J., Zegzulka J., Monitoring bulk material pressure on bottom of storage using DEM, Open Engineering, 9 (2019) 623–630. https://doi.org/10.1515/eng-2019-008010.1515/eng-2019-0080 ↗