Simulation of the Classification of Manufactured Sands in the Throat Air Classifier
Source abstract
Abstract
The scarcity of natural sands has triggered a considerable increase in the consumption of manufactured sands for concrete production. In this regard, particle flaking and excessive fines are the main problems that should be addressed when utilizing manufactured sands. The throat classifier is an air classifier designed for the elimination of fine particles (smaller than 75 micrometers) from manufactured sands. The main features of the classifier have been presented in the literature, but the mechanism that drives the classification has not been studied in detail. Therefore, this work explores the mechanism of classification of the throat classifier by using CFD-DPM and CFD-DEM simulations. The accuracy and limitations of the methodologies were evaluated by comparing the results against experimental data obtained at the pilot scale. The simulations presented fair results in the representation of the airflow and the particle classification inside the throat classifier. Differences between the predictions using CFD-DPM and CFD-DEM methodologies under the simulated conditions were found to be negligible. The results of the simulations allowed for a more detailed understanding of the classification mechanism that occurs inside the device and the influence of operational variables on the equipment performance.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Particle Dynamics in Fluid Flows · Cyclone Separators and Fluid Dynamics · Granular flow and fluidized beds
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
The Center for Research in Physics and Engineering of the Center of the Province of Buenos Aires (CIFICEN), Argentina
References (36)
Show source-provided references
1. Aasly A.K., Danielsen S., Wigun J., Norman S.H., Cepuritis R., Onnela T., Review report on dry and wet classification of filler materials for concrete, COIN Project report, 52 (2014).
2. André F.P., Miceli H., Moura L.C., Neumann R., Tavares L.M., Upgrading a manufactured fine aggregate for use in concrete using dry rare-earth magnetic separation, Minerals Engineering, 143 (2019) 105942. DOI: 10.1016/j.mineng.2019.10594210.1016/j.mineng.2019.105942 ↗
3. ASTM C33, Standard Specification for Concrete Aggregates, ASTM International, 2018. DOI: 10.1520/C0033_C0033M-1810.1520/C0033_C0033M-18 ↗
4. Boemer D., Ponthot J.P., DEM modeling of ball mills with experimental validation: influence of contact parameters on charge motion and power draw, Computational Particle Mechanics, (2016) 1–15. DOI: 10.1007/s40571-016-0125-410.1007/s40571-016-0125-4 ↗
5. Cepuritis R., Jacobsen S., Pedersen B., Mørtsell E., Crushed sand in concrete – effect of particle shape in different fractions and filler properties on rheology, Cement and Concrete Composites, 71 (2016) 26–41. DOI: 10.1016/j.cemconcomp.2016.04.00410.1016/j.cemconcomp.2016.04.004 ↗
6. Cepuritis R., Jacobsen S., Smeplass S., Mørtsell E., Wigum B.J., Ng S., Influence of crushed aggregate fines with micro-proportioned particle size distributions on rheology of cement paste, Cement and Concrete Composites, 80 (2017) 64–79. DOI: 10.1016/j.cemconcomp.2017.02.01210.1016/j.cemconcomp.2017.02.012 ↗
7. Chu K., Yu A., Numerical simulation of complex particle–fluid flows, WCPT5 Papers presented at the 5th World Conference of Particle Technology (WCPT5), Orlando, Florida, April 23–27 2006, 5th World Conference of Particle Technology (WCPT5), 179 (2008) 104–114. DOI: 10.1016/j.powtec.2007.06.01710.1016/j.powtec.2007.06.017 ↗
8. Cundall P.A., Strack O.D.L., A discrete numerical model for granular assemblies, Géotechnique, 29 (1979) 47–65. DOI: 10.1680/geot.1979.29.1.4710.1680/geot.1979.29.1.47 ↗
9. da Cunha E.R., de Carvalho R.M., Tavares L.M., Simulation of solids flow and energy transfer in a vertical shaft impact crusher using DEM, Minerals Engineering, 43–44 (2013) 85–90. DOI: 10.1016/j.mineng.2012.09.00310.1016/j.mineng.2012.09.003 ↗
10. Di Salvo Barsi A., Trezza M.A., Irassar E.F., Comparison of dolostone and limestone as filler in blended cements, Bulletin of Engineering Geology and the Environment, 79 (2020) 243–253. DOI: 10.1007/s10064-019-01549-410.1007/s10064-019-01549-4 ↗
11. Donza H., Cabrera O., Irassar E., High-strength concrete with different fine aggregate, Cement and Concrete Research, 32 (2002) 1755–1761. DOI: 10.1016/S0008-8846(02)00860-810.1016/S0008-8846(02)00860-8 ↗
12. Elghobashi S., On predicting particle-laden turbulent flows, Applied Scientific Research, 52 (1994) 309–329. DOI: 10.1007/BF0093683510.1007/BF00936835 ↗
13. GCCA (Global Cement and Concrete Association), 2050 Net Zero Roadmap Accelerator Program, 2022. accessed11052023.
14. Gonçalves J., Tavares L., Toledo Filho R., Fairbairn E., Cunha E., Comparison of natural and manufactured fine aggregates in cement mortars, Cement and Concrete Research, 37 (2007) 924–932. DOI: 10.1016/j.cemconres.2007.03.00910.1016/j.cemconres.2007.03.009 ↗
15. Greifzu F., Kratzsch C., Forgber T., Lindner F., Schwarze R., Assessment of particle-tracking models for dispersed particle-laden flows implemented in OpenFOAM and ANSYS FLUENT, Engineering Applications of Computational Fluid Mechanics, 10 (2016) 30–43. DOI: 10.1080/19942060.2015.110426610.1080/19942060.2015.1104266 ↗
16. Haider A., Levenspiel O., Drag coefficient and terminal velocity of spherical and nonspherical particles, Powder Technology, 58 (1989) 63–70. DOI: 10.1016/0032-5910(89)80008-710.1016/0032-5910(89)80008-7 ↗
17. Johansson R., Evertsson M., CFD simulation of a centrifugal air classifier used in the aggregate industry, Computational Modelling, 63 (2014) 149–156. DOI: 10.1016/j.mineng.2014.03.01310.1016/j.mineng.2014.03.013 ↗
18. Passaretti M.G., Ninago M.D., Paulo C.I., Petit H.A., Irassar E.F., Vega D.A., Villar M.A., López O.V., Biocomposites based on thermoplastic starch and granite sand quarry waste, Journal of Renewable Materials, 7 (2019) 393–402. DOI: 10.32604/jrm.2019.0428110.32604/jrm.2019.04281 ↗
19. Peng S., Wu Y., Tao J., Chen J., Airflow velocity designing for air classifier of manufactured sand based on CPFD method, Minerals, 12 (2022) 90. DOI: 10.3390/min1201009010.3390/min12010090 ↗
20. Petit A., Cordoba G., Paulo C.I., Irassar E.F., Novel air classification process to sustainable production of manufactured sands for aggregate industry, Journal of Cleaner Production, 198 (2018a) 112–120. DOI: 10.1016/j.jclepro.2018.07.01010.1016/j.jclepro.2018.07.010 ↗
21. Petit H., Barbosa M., Simulación de un clasificador de polvo de flujo cruzado con altos contenidos de polvo, Revista Internacional de Métodos Numéricos para Cálculo y Diseño en Ingeniería, 33 (2017) 262–270. DOI: 10.1016/j.rimni.2016.06.00310.1016/j.rimni.2016.06.003 ↗
22. Petit H.A., Diseño de separadores de partículas finas empleando modelización de flujos complejos, Ph.D. thesis, Universidad Nacional del Centro de la Provincia de Buenos Aires, 2018. Olavarría - Argentina. http://hdl.handle.net/11336/93493
23. Petit H.A., Irassar E.F., The throat classifier: a novel air classifier for the control of dust in manufactured sands, Powder Technology, 390 (2021) 417–427. DOI: 10.1016/j.powtec.2021.05.04910.1016/j.powtec.2021.05.049 ↗
24. Petit H.A., Irassar E.F., Barbosa M.R., Evaluation of the performance of the cross-flow air classifier in manufactured sand processing via CFD-DEM simulations, Computational Particle Mechanics, 5 (2018b) 87–102. DOI: 10.1007/s40571-017-0155-610.1007/s40571-017-0155-6 ↗
25. Petit H.A., Irassar E.F., Barbosa M.R., Desempolvador de arena triturada mediante via seca, Patent (2019) AR110376A1. https://patents.google.com/patent/AR110376A1
26. Petit H.A., Paulo C.I., Cabrera O.A., Irassar E.F., Modelling and optimization of an inclined plane classifier using CFD-DPM and the Taguchi method, Applied Mathematical Modelling, 77 (2020) 617–634. DOI: 10.1016/j.apm.2019.07.05910.1016/j.apm.2019.07.059 ↗
27. Petit H.A., Paulo C.I., Cabrera O.A., Irassar E.F., Evaluation of the dustiness of fugitive dust sources using gravitational drop tests, Aeolian Research, 52 (2021) 100724. DOI: 10.1016/j.aeolia.2021.10072410.1016/j.aeolia.2021.100724 ↗
28. Ramos T., Matos A.M., Schmidt B., Rio J., Sousa-Coutinho J., Granitic quarry sludge waste in mortar: effect on strength and durability, Construction and Building Materials, 47 (2013) 1001–1009. DOI: 10.1016/j.conbuildmat.2013.05.09810.1016/j.conbuildmat.2013.05.098 ↗
29. Rolny D., Sovarso L., Cruz Palma J., Coyoupetrou L., Cremaschi G., Etcheverry R., Forte L., Estudio Preliminar de la Forma, Textura Superficial y Distribución del Tamaño de Partículas de Arenas de trituración, in: Actas del Segundo Congreso Argentino de Aridos, San Isidro, 2015, pp. 233–240.
30. Stone L., Hastie D., Zigan S., Using a coupled CFD–DPM approach to predict particle settling in a horizontal air stream, Advanced Powder Technology, 30 (2019) 869–878. DOI: 10.1016/j.apt.2019.02.00110.1016/j.apt.2019.02.001 ↗
31. Tatari O., Kucukvar M., Eco-efficiency of construction materials: data envelopment analysis, Journal of Construction Engineering and Management, 138 (2012) 733–741. DOI: 10.1061/(ASCE)CO.1943-7862.000048410.1061/(ASCE)CO.1943-7862.0000484 ↗
32. Tawfik M.E., Eskander S.B., Ahmed N.M., Potential applications of granite waste powder as an add-value polymer composite product, Polymers and Polymer Composites, 30 (2022) 09673911221110138. DOI: 10.1177/0967391122111013810.1177/09673911221110138 ↗
33. Torres A., Brandt J., Lear K., Liu J., A looming tragedy of the sand commons, Science, 357 (2017) 970–971. DOI: 10.1126/science.aao050310.1126/science.aao0503 ↗
34. Traoré P., Laurentie J.C., Dascalescu L., An efficient 4 way coupling CFD–DEM model for dense gas–solid particulate flows simulations, Computers & Fluids, 113 (2015) 65–76. DOI: 10.1016/j.compfluid.2014.07.01710.1016/j.compfluid.2014.07.017 ↗
35. UNEP (United Nations Environment Programme), Sand, rarer than one thinks: UNEP global environmental alert service (GEAS), 2014. accessed11052023.
36. Zhou F., Hu S., Liu Y., Liu C., Xia T., CFD–DEM simulation of the pneumatic conveying of fine particles through a horizontal slit, Particuology, 16 (2014) 196–205. DOI: 10.1016/j.partic.2014.03.01510.1016/j.partic.2014.03.015 ↗