journal article·2001Open access

The Influence of Carbon Dioxide on Ring and Ball Formation in a Pilot-Scale Rotary Kiln

Josefina Lindblom, Hans Theliander

KONA Powder and Particle Journal· Volume 19· Issue 0

Abstract

The influence of carbon dioxide on ring and ball formation in a pilot-scale rotary kiln has been investigated. The balls were found to have a higher specific surface area and a higher content of residual carbonate compared with the rings and dusts: this was probably due to a lower heat transfer rate. The influence of carbon dioxide on sintering proved to be different for the two lime muds investigated. One of them reached a minimum in specific surface area at about 10 weight-% and the other decreased its specific surface area with increasing residual carbonate. The strength of the balls increased with increasing residual carbonate. At constant temperature and partial pressures of carbon dioxide, the strength of the balls increases with time and the specific surface area decreases. Also, as the partial pressure of carbon dioxide increases, the reduction of the specific surface area becomes slower and the increase in strength becomes more rapid.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Iron and Steelmaking Processes · Coal Combustion and Slurry Processing · Industrial Technology and Control Systems

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Chemical Engineering Design, Chalmers University of Technology

Department of Forest Products and Chemical Engineering, Chalmers University of Technology

References

Reference metadata was not supplied for this record.