journal article·1986Open access

Control of Solid Flow Rate in a Pneumatic Conveyer [Translated]†

Shigeru Matsumoto, Hiromi Harakawa, Mutsumi Suzuki, Shigemori Ohtani

Abstract

The control characteristics of the solid flow rate are investigated for a pilot scale pneumatic conveyer. The experimental system is a pressure-type vertical conveyer consisting of a 20 mm-I.D. and 5.6 m long transport line. Under a constant air flow rate, the solid flow rate was controlled by manipulating a vibrating feeder based on the feedback of the output signal from the hand-made impact flow-meter which was set downstream of the gas-solid separator. The control system was implemented on a personal computer. Since the output signals of the impact flow-meter contained significant amounts of random noise, the Kalman filter was applied as the observer. The controller was designed based on the discrete I-PD control formula. The formula is a kind of partial model matching method developed by Kitamori. Satisfactory control performance was achieved both as a regulator and as a servo-mechanism for the pilot plant.† This report was originally printed in J. Soc. Powder Technology, Japan, 22(1), 3-10 (1985) in Japanese, before being translated into English by KONA Editorial Committee with the permission of the editorial committee of the Soc. Powder Technology, Japan.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Hydraulic and Pneumatic Systems · Advanced Control Systems Optimization · Advanced Control Systems Design

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Chemical Engineering, Tohoku University

References

Reference metadata was not supplied for this record.