journal article·2022-01-10Open access

The Sevilla Powder Tester: A Tool for Measuring the Flow Properties of Cohesive Powders at High Temperatures

Rahma Gannoun, José Manuel Pérez Ebrí, Alberto T. Pérez, José Manuel Valverde

KONA Powder and Particle Journal· Volume 39· Issue 0

Abstract

Understanding the flowability of cohesive powders at high temperature is of great importance for many industrial applications where these materials are handled at harsh thermal conditions. For instance, the Calcium-Looping (CaL) process, involving the transport, storage and fluidization of limestone powders at high temperature, is being considered nowadays as a promising technology for thermochemical energy storage (TCES) in concentrated solar power plants (CSP). In this context, the High Temperature Seville Powder Tester (HTSPT) is presented in this work as a useful tool to analyze how the flow behavior of cohesive powders changes with temperature. The manuscript reviews the main results obtained so far using this novel apparatus. The change of powder cohesiveness and therefore of powder flowability as depending on temperature, particle size, material properties and nanosilica surface coating is illustrated.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Phase Change Materials Research · Chemical Looping and Thermochemical Processes · Nanofluid Flow and Heat Transfer

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Facultad de Física, Universidad de Sevilla, Spain

Funding

Spanish Government Agency

References (100+)

Show source-provided references
1. Abedin A., A critical review of thermochemical energy storage systems, The Open Renewable Energy Journal, 4 (2011) 42–46. DOI: 10.2174/187638710100401004210.2174/1876387101004010042 ↗
2. ASTM (American Society for Testing and Materials), Annual Book of ASTM Standards, 1978.
3. André L., Abanades S., Flamant G., Screening of thermochemical systems based on solid-gas reversible reactions for high temperature solar thermal energy storage, Renewable and Sustainable Energy Reviews, 64 (2016) 703–715. DOI: 10.1016/j.rser.2016.06.04310.1016/j.rser.2016.06.043 ↗
4. Barker R., The reactivity of calcium oxide towards carbon dioxide and its use for energy storage, Journal of Applied Chemistry and Biotechnology, 24 (1974) 221–227. DOI: 10.1002/jctb.272024040510.1002/jctb.2720240405 ↗
5. Barletta D., Donsì G., Ferrari G., Poletto M., Aerated flow of fine cohesive powders in a Peschl shear cell, Powders and Grains 2005—Proceedings of the 5th International Conference on Micromechanics of Granular Media, 2 (2005) 1033–1037.
6. Barletta D., Donsì G., Ferrari G., Poletto M., A rotational tester for the characterization of aerated shear flow of powders, Particle & Particle Systems Characterization, 24 (2007) 259–270. DOI: 10.1002/ppsc.20070111510.1002/ppsc.200701115 ↗
7. Benitez-Guerrero M., Sarrion B., Perejon A., Sanchez-Jimenez P.E., Perez-Maqueda L.A., Manuel Valverde J., Large-scale high-temperature solar energy storage using natural minerals, Solar Energy Materials and Solar Cells, 168 (2017) 14–21. DOI: 10.1016/j.solmat.2017.04.01310.1016/j.solmat.2017.04.013 ↗
8. Blamey J., Anthony E.J., Wang J., Fennell P.S., The calcium looping cycle for large-scale CO2 capture, Progress in Energy and Combustion Science, 36 (2010) 260–279. DOI: 10.1016/j.pecs.2009.10.00110.1016/j.pecs.2009.10.001 ↗
9. Botterill J.S.M., Teoman Y., Yüregir K.R., The effect of operating temperature on the velocity of minimum fluidization, bed voidage and general behavior, Powder Technology, 31 (1982) 101–110. DOI: 10.1016/0032-5910(82)80009-010.1016/0032-5910(82)80009-0 ↗
10. Bruni G., Barletta D., Poletto M., Lettieri P., A rheological model for the flowability of aerated fine powders, Chemical Engineering Science, 62 (2007a) 397–407. DOI: 10.1016/j.ces.2006.08.06010.1016/j.ces.2006.08.060 ↗
11. Bruni G., Lettieri P., Newton D., Barletta D., An investigation of the effect of the interparticle forces on the fluidization behaviour of fine powders linked with rheological studies, Chemical Engineering Science, 62 (2007b) 387–396. DOI: 10.1016/j.ces.2006.08.05910.1016/j.ces.2006.08.059 ↗
12. Cabeza L.F., Sole C., Castell A., Oro E., Gil A., Review of solar thermal storage techniques and associated heat transfer technologies, Proceedings of the IEEE, 100 (2012) 525–538. DOI: 10.1109/jproc.2011.215788310.1109/JPROC.2011.2157883 ↗
13. Carman P.C., Fluid flow through granular beds, Chemical Engineering Research and Design, 75 (1997) S32–S48. DOI: 10.1016/s0263-8762(97)80003-210.1016/S0263-8762(97)80003-2 ↗
14. Carrillo A.J., González-Aguilar J., Romero M., Coronado J.M., Solar energy on demand: a review on high temperature thermochemical heat storage systems and materials, Chemical Reviews, 119 (2019) 4777–4816. DOI: 10.1021/acs.chemrev.8b0031510.1021/acs.chemrev.8b00315 ↗
15. Castellanos A., The relationship between attractive interparticle forces and bulk behaviour in dry and uncharged fine powders, Advances in Physics, 54 (2005) 263–376. DOI: 10.1080/1746139050040265710.1080/17461390500402657 ↗
16. Castellanos A., Valverde J.M., Quintanilla M.A.S., The Sevilla powder tester: a tool for characterizing the physical properties of fine cohesive powders at very small consolidations, KONA Powder and Particle Journal, 22 (2004) 66–81. DOI: 10.14356/kona.200401110.14356/kona.2004011 ↗
17. Cordis, 2020, accessed 24.05.2021.
18. Crystran, 2020, accessed 08 october.2020.
19. Chacartegui R., Alovisio A., Ortiz C., Valverde J.M., Verda V., Becerra J.A., Thermochemical energy storage of concentrated solar power by integration of the calcium looping process and a CO2 power cycle, Applied Energy, 173 (2016) 589–605. DOI: 10.1016/j.apenergy.2016.04.05310.1016/j.apenergy.2016.04.053 ↗
20. Chen Y., Quintanilla M.A.S., Yang J., Valverde J.M., Dave R.N., Pull-off force of coated fine powders under small consolidation, Physical Review E, 79 (2009) 041305. DOI: 10.1103/PhysRevE.79.04130510.1103/PhysRevE.79.041305 ↗
21. Chen Y., Yang J., Dave R.N., Pfeffer R., Fluidization of coated group C powders, AIChE Journal, 54 (2008) 104–121. DOI: 10.1002/aic.1136810.1002/aic.11368 ↗
22. Chirone R., Barletta D., Lettieri P., Poletto M., Measurement of high temperature powder flow properties to estimate interparticle forces in high temperature fluidization, Proceedings of the 8th International Conference for Conveying and Handling of Particulate Solids (CHoPS 2015), 2015.
23. Chirone R., Poletto M., Barletta D., Lettieri P., The effect of temperature on the minimum fluidization conditions of industrial cohesive particles, Powder Technology, 362 (2020) 307–322. DOI: 10.1016/j.powtec.2019.11.10210.1016/j.powtec.2019.11.102 ↗
24. Daniel I.M., Fibers A.C.D.-o.H.M., Their C., International A., Composite materials: testing and design (sixth conference): a conference, ASTM, Philadelphia, Pa. (1916 Race St., Philadelphia 19103), 1982, ISBN: 97808031484990803148496.
25. Ding W., Chen G., Qin M., He Y., Qu X., Low-cost Ti powders for additive manufacturing treated by fluidized bed, Powder Technology, 350 (2019) 117–122. DOI: 10.1016/j.powtec.2019.03.04210.1016/j.powtec.2019.03.042 ↗
26. Dunn R.I., Hearps P.J., Wright M.N., Molten-salt power towers: newly commercial concentrating solar storage, Proceedings of the IEEE, 100 (2012) 504–515. DOI: 10.1109/JPROC.2011.216373910.1109/JPROC.2011.2163739 ↗
27. Durán-Olivencia F.J., Ebri J.M.P., Espín M.J., Valverde J.M., The cohesive behaviour of granular solids at high temperature in solar energy storage, Energy Conversion and Management, 240 (2021) 114217. DOI: 10.1016/j.enconman.2021.11421710.1016/j.enconman.2021.114217 ↗
28. Durán-Olivencia F.J., Espín M.J., Valverde J.M., Cross effect between temperature and consolidation on the flow behavior of granular materials in thermal energy storage systems, Powder Technology, 363 (2020) 135–145. DOI: 10.1016/j.powtec.2019.11.12510.1016/j.powtec.2019.11.125 ↗
29. Esence T., Benoit H., Poncin D., Tessonneaud M., Flamant G., A shallow cross-flow fluidized-bed solar reactor for continuous calcination processes, Solar Energy, 196 (2020) 389–398. DOI: 10.1016/j.solener.2019.12.02910.1016/j.solener.2019.12.029 ↗
30. Espin M.J., Duran-Olivencia F.J., Valverde J.M., Role of particle size on the cohesive behavior of limestone powders at high temperature, Chemical Engineering Journal, 391 (2020) 123520. DOI: 10.1016/j.cej.2019.12352010.1016/j.cej.2019.123520 ↗
31. Espin M.J., Ebri J.M.P., Valverde J.M., Tensile strength and compressibility of fine CaCO3 powders, Effect of nanosilica addition, Chemical Engineering Journal, 378 (2019) 122166. DOI: 10.1016/j.cej.2019.12216610.1016/j.cej.2019.122166 ↗
32. Fernández A.G., Ushak S., Galleguillos H., Pérez F.J., Development of new molten salts with LiNO3 and Ca(NO3)2 for energy storage in CSP plants, Applied Energy, 119 (2014) 131–140. DOI: 10.1016/j.apenergy.2013.12.06110.1016/j.apenergy.2013.12.061 ↗
33. Ghadami Jadval Ghadam A., Investigation of mechanical properties prediction of synthesized nylon-66/nano-calcium carbonate composites, Journal of Particle Science & Technology, 1 (2015) 241–251. DOI: 10.22104/jpst.2015.307
34. Ghadiri M., Pasha M., Nan W., Hare C., Vivacqua V., Zafar U., Nezamabadi S., Lopez A., Pasha M., Nadimi S., Cohesive powder flow: trends and challenges in characterisation and analysis, KONA Powder and Particle Journal, 37 (2020) 3–18. DOI: 10.14356/kona.202001810.14356/kona.2020018 ↗
35. Gil A., Medrano M., Martorell I., Lázaro A., Dolado P., Zalba B., Cabeza L.F., State of the art on high temperature thermal energy storage for power generation. Part 1—Concepts, materials and modellization, Renewable and Sustainable Energy Reviews, 14 (2010) 31–55. DOI: 10.1016/j.rser.2009.07.03510.1016/j.rser.2009.07.035 ↗
36. Gunda R., Volinsky A.A., Tip-Induced calcite single crystal nanowear, MRS Proceedings, 1049 (2011) 1049-AA1005–1015. DOI: 10.1557/PROC-1049-AA05-1510.1557/PROC-1049-AA05-15 ↗
37. Gupta N.S., Chitin: Formation and Diagenesis, Springer Netherlands, 2010, ISBN: 9789048196845. DOI: 10.1007/978-90-481-9684-510.1007/978-90-481-9684-5 ↗
38. Hall D., Cutress J., The effect of fines content, moisture and added oil on the handling of small coal, Institute of Fuels, 33 (1960) 63–72.
39. Hall E.W., Hausz W., Thermal energy storage for electric utility applications, Transactions of the American Nuclear Society: United States, 32 (1979) CONF-790602-(Summ.).
40. Hanak D., Anthony E., Manovic V., A review of developments in pilot plant testing and modelling of calcium looping process for CO2 capture from power generation systems, Energy & Environmental Science, (2015) DOI: 10.1039/C5EE01228G10.1039/C5EE01228G ↗
41. Herrmann U., Kearney D., Survey of Thermal energy storage for parabolic trough power plants, Journal of Solar Energy Engineering, 124 (2002) 145–152. DOI: 10.1115/1.146760110.1115/1.1467601 ↗
42. Hubermaterials, 2020, accessed 05-09.2020.
43. Kamiya H., Kimura A., Yokoyama T., Naito M., Jimbo G., Development of a split-type tensile-strength tester and analysis of mechanism of increase of adhesion behavior of inorganic fine powder bed at high-temperature conditions, Powder Technology, 127 (2002) 239–245. DOI: 10.1016/S0032-5910(02)00117-110.1016/S0032-5910(02)00117-1 ↗
44. Kanaoka C., Hata M., Makino H., Measurement of adhesive force of coal flyash particles at high temperatures and different gas compositions, Powder Technology, 118 (2001) 107–112. DOI: 10.1016/S0032-5910(01)00300-X10.1016/S0032-5910(01)00300-X ↗
45. Karasavvas E., Panopoulos K.D., Papadopoulou S., Voutetakis S., Energy and exergy analysis of the integration of concentrated solar power with calcium looping for power production and thermochemical energy storage, Renewable Energy, 154 (2020) 743–753. DOI: 10.1016/j.renene.2020.03.01810.1016/j.renene.2020.03.018 ↗
46. Kierzkowska A., Pacciani R., Müller C., CaO-based CO2 sorbents: from fundamentals to the development of new, highly effective materials, ChemSusChem, 6 (2013). DOI: 10.1002/cssc.20130017810.1002/cssc.201300178 ↗
47. Kunii D., Levenspiel O., Brenner H., Fluidization Engineering, Elsevier Science, 1991, ISBN: 9780409902334.
48. Lee S.-W., Kim Y.-J., Lee Y.-H., Guim H., Han S.M., Behavior and characteristics of amorphous calcium carbonate and calcite using CaCO3 film synthesis, Materials & Design, 112 (2016) 367–373. DOI: 10.1016/j.matdes.2016.09.09910.1016/j.matdes.2016.09.099 ↗
49. Lettieri P., Macrì D., Effect of process conditions on fluidization, KONA Powder and Particle Journal, 33 (2016) 86–108. DOI: 10.14356/kona.201601710.14356/kona.2016017 ↗
50. Lettieri P., Yates J.G., Newton D., The influence of interparticle forces on the fluidization behaviour of some industrial materials at high temperature, Powder Technology, 110 (2000) 117–127. DOI: 10.1016/S0032-5910(99)00274-010.1016/S0032-5910(99)00274-0 ↗
51. Lisbona P., Bailera M., Hills T., Sceats M., Díez L.I., Romeo L.M., Energy consumption minimization for a solar lime calciner operating in a concentrated solar power plant for thermal energy storage, Renewable Energy, 156 (2020) 1019–1027. DOI: 10.1016/j.renene.2020.04.12910.1016/j.renene.2020.04.129 ↗
52. Lomboy G., Sundararajan S., Kejin W., Subramaniam S., A test method for determining adhesion forces and Hamaker constants of cementitious materials using atomic force microscopy, Cement and Concrete Research, 41 (2011) 1157–1166. DOI: 10.1016/j.cemconres.2011.07.00410.1016/j.cemconres.2011.07.004 ↗
53. Lüddecke A., Pannitz O., Zetzener H., Sehrt J.T., Kwade A., Powder properties and flowability measurements of tailored nanocomposites for powder bed fusion applications, Materials & Design, 202 (2021) 109536. DOI: 10.1016/j.matdes.2021.10953610.1016/j.matdes.2021.109536 ↗
54. Macrì D., Poletto M., Barletta D., Sutcliffe S., Lettieri P., Analysis of industrial reactive powders flow properties at high temperature, Powder Technology, 316 (2017) 131–138. DOI: 10.1016/j.powtec.2016.10.06410.1016/j.powtec.2016.10.064 ↗
55. Mahlia T.M.I., Saktisahdan T.J., Jannifar A., Hasan M.H., Matseelar H.S.C., A review of available methods and development on energy storage; technology update, Renewable and Sustainable Energy Reviews, 33 (2014) 532–545. DOI: 10.1016/j.rser.2014.01.06810.1016/j.rser.2014.01.068 ↗
56. Marchetti L., Hulme-Smith C., Flowability of steel and tool steel powders: a comparison between testing methods, Powder Technology, 384 (2021) 402–413. DOI: 10.1016/j.powtec.2021.01.07410.1016/j.powtec.2021.01.074 ↗
57. Materialsproject, 2020, accessed 15.04.2020.
58. Matweb, 2020, accessed 18.09.2020.
59. Michel M.D., Mikowski A., Lepienski C.M., Foerster C.E., Serbena F.C., High temperature microhardness of soda-lime glass, Journal of Non-Crystalline Solids, 348 (2004) 131–138. DOI: 10.1016/j.jnoncrysol.2004.08.13810.1016/j.jnoncrysol.2004.08.138 ↗
60. Nedderman R.M., Statics and Kinematics of Granular Materials, Cambridge University Press, Cambridge, 1992, ISBN: 9780521404358.10.1017/CBO9780511600043 ↗
61. Ortega J.I., Burgaleta J.I., Téllez F.M., Central receiver system solar power plant using molten salt as heat transfer fluid, Journal of Solar Energy Engineering, 130 (2008) 024501 (6 pages). DOI: 10.1115/1.280721010.1115/1.2807210 ↗
62. Pardo P., Deydier A., Anxionnaz-Minvielle Z., Rougé S., Cabassud M., Cognet P., A review on high temperature thermochemical heat energy storage, Renewable and Sustainable Energy Reviews, 32 (2014) 591–610. DOI: 10.1016/j.rser.2013.12.01410.1016/j.rser.2013.12.014 ↗
63. Pinel P., Cruickshank C.A., Beausoleil-Morrison I., Wills A., A review of available methods for seasonal storage of solar thermal energy in residential applications, Renewable and Sustainable Energy Reviews, 15 (2011) 3341–3359. DOI: 10.1016/j.rser.2011.04.01310.1016/j.rser.2011.04.013 ↗
64. Pintaldi S., Perfumo C., Sethuvenkatraman S., White S., Rosengarten G., A review of thermal energy storage technologies and control approaches for solar cooling, Renewable and Sustainable Energy Reviews, 41 (2015) 975–995. DOI: 10.1016/j.rser.2014.08.06210.1016/j.rser.2014.08.062 ↗
65. Prieto C., Cooper P., Fernández A., Cabeza L.F., Review of technology: thermochemical energy storage for concentrated solar power plants, Renewable and Sustainable Energy Reviews, 60 (2016) 909–929. DOI: 10.1016/j.rser.2015.12.36410.1016/j.rser.2015.12.364 ↗
66. Quintanilla M.A.S., Castellanos A., Valverde J.M., Correlation between bulk stresses and interparticle contact forces in fine powders, Physical Review E, 64 (2001a) 031301. DOI: 10.1103/PhysRevE.64.03130110.1103/PhysRevE.64.031301 ↗
67. Quintanilla M.A.S., Valverde J.M., Castellanos A., Adhesion force between fine particles with controlled surface properties, AIChE Journal, 52 (2006) 1715–1728. DOI: 10.1002/aic.1077010.1002/aic.10770 ↗
68. Quintanilla M.A.S., Valverde J.M., Castellanos A., Viturro R.E., Looking for self-organized critical behavior in avalanches of slightly cohesive powders, Physical Review Letters, 87 (2001b) 194301. DOI: 10.1103/PhysRevLett.87.19430110.1103/PhysRevLett.87.194301 ↗
69. Ramlakhan M., Wu C.Y., Watano S., Dave R.N., Pfeffer R., Dry particle coating using magnetically assisted impaction coating: modification of surface properties and optimization of system and operating parameters, Powder Technology, 112 (2000) 137–148. DOI: 10.1016/S0032-5910(99)00314-910.1016/S0032-5910(99)00314-9 ↗
70. Røyne A., Bisschop J., Dysthe D., Experimental investigation of surface energy and subcritical crack growth in calcite, Journal of Geophysical Research-Solid Earth, 116 (2011) B04204. DOI: 10.1029/2010jb00803310.1029/2010JB008033 ↗
71. Salehi H., Barletta D., Poletto M., A comparison between powder flow property testers, Particuology, 32 (2017) 10–20. DOI: 10.1016/j.partic.2016.08.00310.1016/j.partic.2016.08.003 ↗
72. Sang L., Cai M., Zhao Y., Ren N., Wu Y., Burda C., Mixed metal carbonates/hydroxides for concentrating solar power analyzed with DSC and XRD, Solar Energy Materials and Solar Cells, 140 (2015) 167–173. DOI: 10.1016/j.solmat.2015.04.00610.1016/j.solmat.2015.04.006 ↗
73. Santhanam A.T., Gupta Y.P., Cleavage surface energy of calcite, International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, 5 (1968) 253–259. DOI: 10.1016/0148-9062(68)90013-210.1016/0148-9062(68)90013-2 ↗
74. Santomaso A., Lazzaro P., Canu P., Powder flowability and density ratios: the impact of granules packing, Chemical Engineering Science, 58 (2003) 2857–2874. DOI: 10.1016/s0009-2509(03)00137-410.1016/S0009-2509(03)00137-4 ↗
75. Sarrion B., Valverde J.M., Perejon A., Perez-Maqueda L., Sanchez-Jimenez P.E., On the multicycle activity of natural limestone/dolomite for thermochemical energy storage of concentrated solar power, Energy Technology, 4 (2016) 1013–1019. DOI: 10.1002/ente.20160006810.1002/ente.201600068 ↗
76. Schubert H., Capillary forces—modeling and application in particulate technology, Powder Technology, 37 (1984) 105–116. DOI: 10.1016/0032-5910(84)80010-810.1016/0032-5910(84)80010-8 ↗
77. Schwedes J., Fließverhalten von Schüttgütern in Bunkern, Chemie Ingenieur Technik, 1976, pp. 294–300, ISBN: 0009-286X.10.1002/cite.330480407 ↗
78. Schwedes J.r., Review on testers for measuring flow properties of bulk solids, Granular Matter, 5 (2003) 1–43. DOI: 10.1007/s10035-002-0124-410.1007/s10035-002-0124-4 ↗
79. Sharma A., Tyagi V.V., Chen C.R., Buddhi D., Review on thermal energy storage with phase change materials and applications, Renewable and Sustainable Energy Reviews, 13 (2009) 318–345. DOI: 10.1016/j.rser.2007.10.00510.1016/j.rser.2007.10.005 ↗
80. Shi C., Palomo Sánchez A., Torgal F.P., Carbon dioxide sequestration in cementitious construction materials, Elsevier Science & Technology, Cambridge, United Kingdom, 2018, ISBN: 978-0-08-102444-7.
81. Shimada Y., Yonezawa Y., Sunada H., Nonaka R., Katou K., Morishita H., Development of an apparatus for measuring adhesive force between fine particles [Translated], KONA Powder and Particle Journal, 20 (2002) 223–230. DOI: 10.14356/kona.200202410.14356/kona.2002024 ↗
82. Smith D.H., Haddad G.J., Ferer M., Shear strengths of heated and unheated mixtures of MgSO4 and CaSO4 powders. Model pressurized fluidized bed combustion filter cakes, Energy & Fuels, 11 (1997) 1006–1011. DOI: 10.1021/ef970037d10.1021/ef970037d ↗
83. Surfacenet, 2020, accessed 08.11.2020.
84. Svarovsky L., Powder Testing Guide: Methods of measuring the physical properties of bulk powders, Published on behalf of the British Materials Handling Board by Elsevier Applied Science, 1987.
85. Tammann G., Lehrbuch der Metallkunde, Leipzig, 1932.
86. Tatsidjodoung P., Le Pierrès N., Luo L., A review of potential materials for thermal energy storage in building applications, Renewable and Sustainable Energy Reviews, 18 (2013) 327–349. DOI: 10.1016/j.rser.2012.10.02510.1016/j.rser.2012.10.025 ↗
87. Tesio U., Guelpa E., Ortiz C., Chacartegui R., Verda V., Optimized synthesis/design of the carbonator side for direct integration of thermochemical energy storage in small size concentrated solar power, Energy Conversion and Management: X, 4 (2019) 100025. DOI: 10.1016/j.ecmx.2019.10002510.1016/j.ecmx.2019.100025 ↗
88. Tesio U., Guelpa E., Verda V., Integration of thermochemical energy storage in concentrated solar power. Part 2: Comprehensive optimization of supercritical CO2 power block, Energy Conversion and Management: X, 6 (2020) 100038. DOI: 10.1016/j.ecmx.2020.10003810.1016/j.ecmx.2020.100038 ↗
89. Tomasetta I., Barletta D., Poletto M., The effect of temperature on flow properties of fine powders, Chemical Engineering Transactions, 24 (2011) 655–660. DOI: 10.3303/cet1124110
90. Tsukada M., Kawashima K., Yamada H., Yao Y., Kamiya H., Analysis of adhesion behavior of waste combustion ash at high temperatures and its control by the addition of coarse particles, Powder Technology, 180 (2008) 259–264. DOI: 10.1016/j.powtec.2007.04.00510.1016/j.powtec.2007.04.005 ↗
91. Valverde J.M., Ca-based synthetic materials with enhanced CO2 capture efficiency, Journal of Materials Chemistry A, 1 (2013) 447–468. DOI: 10.1039/c2ta00096B10.1039/C2TA00096B ↗
92. Valverde J.M., On the negative activation energy for limestone calcination at high temperatures nearby equilibrium, Chemical Engineering Science, 132 (2015) 169–177. DOI: 10.1016/j.ces.2015.04.02710.1016/j.ces.2015.04.027 ↗
93. Valverde J.M., Castellanos A., Ramos A., Pérez A.T., Morgan M.A., Watson P.K., An automated apparatus for measuring the tensile strength and compressibility of fine cohesive powders, Review of Scientific Instruments, 71 (2000) 2791–2795. DOI: 10.1063/1.115069410.1063/1.1150694 ↗
94. Watson P.K., Valverde J.M., Castellanos A., The tensile strength and free volume of cohesive powders compressed by gas flow, Powder Technology, 115 (2001) 45–50. DOI: 10.1016/s0032-5910(00)00275-810.1016/S0032-5910(00)00275-8 ↗
95. Wen C.Y., Yu Y.H., A generalized method for predicting the minimum fluidization velocity, AIChE Journal, 12 (1966) 610–612. DOI: 10.1002/aic.69012034310.1002/aic.690120343 ↗
96. Wheeler J.M., Michler J., Indenter materials for high temperature nanoindentation, Review of Scientific Instruments, 84 (2013) 101301. DOI: 10.1063/1.482471010.1063/1.4824710 ↗
97. Wu Y.-t., Li Y., Ren N., Ma C.-f., Improving the thermal properties of NaNO3-KNO3 for concentrating solar power by adding additives, Solar Energy Materials and Solar Cells, 160 (2017) 263–268. DOI: 10.1016/j.solmat.2016.10.01310.1016/j.solmat.2016.10.013 ↗
98. Xu Y.,Luo C., Zheng Y., Ding H., Wang Q., Shen Q., Li X., Zhang L., Characteristics and performance of CaO-based high temperature CO2 sorbents derived from a sol–gel process with different supports, RSC Advances, 6 (2016) 79285–79296. DOI: 10.1039/c6ra15785h10.1039/C6RA15785H ↗
99. Yang J., Sliva A., Banerjee A., Dave R.N., Pfeffer R., Dry particle coating for improving the flowability of cohesive powders, Powder Technology, 158 (2005) 21–33. DOI: 10.1016/j.powtec.2005.04.03210.1016/j.powtec.2005.04.032 ↗
100. Yang W.-C., Chitester D.C., Kornosky R.M., Keairns D.L., A generalized methodology for estimating minimum fluidization velocity at elevated pressure and temperature, AIChE Journal, 31 (1985) 1086–1092. DOI: 10.1002/aic.69031070610.1002/aic.690310706 ↗