CaCl2-in-Mesoporous Silica Grown on Superabsorbent Polymer to Enhance Water Uptake
Source abstract
Abstract
Super absorbent polymer (SAP) sorbs copious amount of liquid water but its sorption power for water vapor is quite low. On the other hand, mesoporous silica loaded with CaCl2 (MPS-CC) has high sorption capacity for water vapor. However, this is determined by the salt loading, which is limited due to its corrosiveness. Even by simple powder blending of 75 mass% of SAP and the balance of MPS-CC (SAP75/MPS-CC25), the 3-hour maximum specific water uptake (g H2O/g sorbent) reached the maximum, 3 times the equilibrium uptake of MPS-CC. The sorption property was further enhanced by developing a new sorbent in which mesoporous silica was grown on the surface of swelling SAP and then impregnated by CC in ethanol. In the new sorbent (SAP-iMPS-CC), MPS grew organized, straight and lengthwise by the help of SAP. Owing to such intimate contact between MPS and SAP, the 3-hour specific water uptake of the new sorbents grown for more than 24 h (SAP-iMPS-CC24) was kept constant at the value of 2 times that of SAP75/MPS25. The SAP mass% of SAP-iMPS-144 could reach 25 without the sacrifice of sorption capacity.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Adsorption and Cooling Systems · Solar-Powered Water Purification Methods · Aerogels and thermal insulation
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Chemical Engineering and Materials Science, Chung-Ang University, Korea
Funding
National Research Foundation of Korea · Chung-Ang University
References (23)
Show source-provided references
1. Aristov Yu.I., New Family of Solid Sorbents for Adsorptive Cooling: Material Scientist Approach, J. Eng. Thermophys.-Rus., 16 (2007) 63–72.10.1134/S1810232807020026 ↗
2. Aristov Yu.I., Dawoud B., Glaznev I.S., Elyas A., A new methodology of studying the dynamics of water sorption/desorption under real operating conditions of adsorption heat pumps: Experiment under real operating conditions of adsorption heat pumps: Experiment, Int. J. Heat Mass Tran., 51 (2008) 4966–4972.10.1016/j.ijheatmasstransfer.2007.10.042 ↗
3. Aristov Yu.I., Glaznev I.S., Freni A., Restuccia G., Kinetics of water sorption on SWS-1L (calcium chloride confined to mesoporous silica gel): Influence of grain size and temperature, Chem. Eng. Sci., 61 (2006) 1453–1458.10.1016/j.ces.2005.08.033 ↗
4. Aristov Yu.I., Restuccia G., Cacciola G., Parmon V.N., Adsorptive transformation of heat: Principles of construction of adsorbents database, Appl. Therm. Eng., 22 (2002) 191–204.10.1016/S1359-4311(01)00072-2 ↗
5. Barrabino A., Synthesis of mesoporous silica particles with control of both pore diameter and particle size, M.S. Thesis (2011), Chalmers University of Technology.
6. Best B., Lessons for Cryonics from Metallurgy and Ceramics, in Ben Best’s Home Page (1990), Retrieved July 28, 2014, from http://www.benbest.com/cryonics/lessons.html.
7. Elliott M., Superabsorbent Polymer, Product Development Scientist for SAP, BASF Aktiengesellschaft (2004), Retrieved July 28, 2014, from http://chimianet.zefat.ac.il/download/Super-absorbant_polymers.pdf.
8. Espinosa R.M., Franke L., Deckelmann G., Phase change of salts in porous materials: Crystallization, hydration and deliquescence, Constr. Build. Mater., 22 (2008) 1758–1773.10.1016/j.conbuildmat.2007.05.005 ↗
9. Glaznev I.S., Aristov Yu.I., Kinetics of water adsorption on loose grains of SWS-1L under isobaric stages of adsorption heat pump: The effect of residual air, Int. J. Heat Mass Tran., 51 (2008) 5823–5827.10.1016/j.ijheatmasstransfer.2008.04.061 ↗
10. Glaznev I., Ponomarenko I., Kirik S., Aristov Yu.I., Composites CaCl2/SBA-15 for adsorptive transformation of low temperature heat: Pore size effect, Int. J. Refrig., 34 (2011) 1244–1250.10.1016/j.ijrefrig.2011.02.007 ↗
11. Gong L.X., Wang R.Z., Xia Z.Z., Chen C.J., Design and performance prediction of a new generation adsorption chiller using composite adsorbent, Energ. Convers. Manage., 52 (2011) 2345–2350.10.1016/j.enconman.2010.12.036 ↗
12. Jin Z.-F., Asako Y., Yamaguchi Y., Yoshida H., Int. J. Heat Mass Tran., 43 (2000) 3407–3415.10.1016/S0017-9310(99)00372-5 ↗
13. Li X., Li H., Huo S. and Li Z., Dynamics and isotherms of water vapor sorption on mesoporous silica gels modified by different salts, Kinetics and Catalysis, 51 (2010) 754–761.10.1134/S0023158410050186 ↗
14. Lin H.-P., Kao C.-P., Mou C.-Y., Counterion and alcohol effect in the formation of mesoporous silica, Microporous and Mesoporous Materials, 48 (2001), 135–141.10.1016/S1387-1811(01)00336-5 ↗
15. Ovoshchnikov D.S., Glaznev I.S., Aristov Yu.I., Water Sorption by the Calcium Chloride/Silica Gel Composite: The Accelerating Effect of the Salt Solution Present in the Pores, Kinetics and Catalysis, 52 (2011) 620–628.10.1134/S0023158411040124 ↗
16. Pan M.-C., Yang Y.-X., Ying H.-P., Jia X.-C., Chen Y.-R., Tang Y., Effect of Variant Counterions on Stability and Particle Size of Silica Sol, Chinese Journal of Chemistry, 25 (2007) 1514–1521.10.1002/cjoc.200790279 ↗
17. Ponomarenko I.V., Glaznev I.S., Gubar A.V., Aristov Yu.I., Kirik S.D, Synthesis and water sorption properties of a new composite “CaCl2 confined into SBA-15 pores”, Micropor. Mesopor. Mat., 129 (2010) 243–250.10.1016/j.micromeso.2009.09.023 ↗
18. Restuccia G., Freni A., Vasta S., Aristov Yu.I., Selective water sorbent for solid sorption chiller: experimental results and modelling, Int. J. Refrig., 27 (2004) 284–293.10.1016/j.ijrefrig.2003.09.003 ↗
19. Saha B.B., Chakraborty A., Koyama S., Aristov Yu.I., A new generation cooling device employing CaCl2-in-silica gel-water system, Int. J. Heat Mass Tran., 52 (2009) 516–524.10.1016/j.ijheatmasstransfer.2008.06.018 ↗
20. Tokarev M., Gordeeva L., Rommannikov V., Glaznev I., New composite sorbent CaCl2 in mesopores for sorption cooling/heating, Int. J. Therm. Sci., 41 (2002) 470–474.10.1016/S1290-0729(02)01339-X ↗
21. Thommes M., Physical Adsorption Characterization of Nanoporous Materials, Chemie Ingenieur Technik, 82 (2010) 1059–1073.10.1002/cite.201000064 ↗
22. Yu J., Shi J.-L., Chen H.-R., Yan J.-N., Yan D.-S., Effect of inorganic salt addition during synthesis on pore structure and hydrothermal stability of mesoporous silica, Microporous and Mesoporous Materials, 46 (2001) 153–162.10.1016/S1387-1811(01)00269-4 ↗
23. Zhang X.J., Qiu L.M., Moisture transport and adsorption on silica gel-calcium chloride composite adsorbents, Energ. Convers. Manage., 48 (2007) 320–326.10.1016/j.enconman.2006.04.001 ↗