Real-time in-situ Rheological Assessment of Sticky Point Temperature and Humidity of Powdered Products
Source abstract
Abstract
Unwanted changes in powder flow behavior can unexpectedly occur when a product is exposed to certain conditions of temperature and humidity. This can happen during production, but also during transport or storage. The work reported here demonstrates the novel approach of using an amended powder rheology set-up for measuring and predicting such changes in powder flow behavior. The developed methodology makes it possible to vary in-situ the temperature and the relative humidity of the air to which the product is exposed, thereby mimicking realistic conditions of production or related unit operations. An air flow capable of fluidizing the powder particles is controlled at a specific constant temperature and its relative humidity can be altered while measuring the torque in the fluidized powder bed in real time. The fluidization is necessary for generating a homogeneous introduction of temperature and relative humidity. Results obtained using citric acid and commercial coffee whitener products have proven this methodology to provide both similar and in certain instances dissimilar results compared to the more established methodology such as measuring the vapour adsorption isotherms. These observations are explained. In this way, it can be predicted under which combinations of temperature and humidity a product does or does not become sticky. The main advantages of our approach are that the flow properties are directly assessed, the interpretation of the obtained data is more straightforward and that the measurement times are shortened substantially.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Microencapsulation and Drying Processes · Freezing and Crystallization Processes · Fluid Dynamics and Heat Transfer
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Delft Solids Solutions B.V., The Netherlands
Department of Chemical Engineering, Delft University of Technology, The Netherlands
Anton Paar, Austria
References (19)
Show source-provided references
1. Bhandari B.R., Howes T., Implication of glass transition for the drying and stability of dried foods, Journal of Food Engineering, 40 (1999) 71–79. DOI: 10.1016/S0260-8774(99)00039-410.1016/S0260-8774(99)00039-4 ↗
2. Downton G.E., Flores-Luna J.L., King C.J., Mechanism of stickiness in hygroscopic, amorphous powders, Industrial & Engineering Chemistry Fundamentals, 21 (1982) 447–451. DOI: 10.1021/i100008a02310.1021/i100008a023 ↗
3. Emery E., Oliver J., Pugsley T., Sharma J., Zhou J., Flowability of moist pharmaceutical powders, Powder Technology, 189 (2009) 409–415. DOI: 10.1016/j.powtec.2008.06.01710.1016/j.powtec.2008.06.017 ↗
4. Goula A.M., Karapantsios T.D., Achilias D.S., Adamopoulos K.G., Water sorption isotherms and glass transition temperature of spray dried tomato pulp, Journal of Food Engineering, 85 (2008) 73–83. DOI: 10.1016/j.jfoodeng.2007.07.01510.1016/j.jfoodeng.2007.07.015 ↗
5. Jarray A., Magnanimo V., Luding S., Wet granular flow control through liquid induced cohesion, Powder Technology, 341 (2019) 126–139. DOI: 10.1016/j.powtec.2018.02.04510.1016/j.powtec.2018.02.045 ↗
6. Juarez-Enriquez E., Olivas G.I., Zamudio-Flores P.B., Ortega-Rivas E., Perez-Vega S., Sepulveda D.R., Effect of water content on the flowability of hygroscopic powders, Journal of Food Engineering, 205 (2017) 12–17. DOI: 10.1016/j.jfoodeng.2017.02.02410.1016/j.jfoodeng.2017.02.024 ↗
7. Leturia M., Benali M., Lagarde S., Ronga I., Saleh K., Characterization of flow properties of cohesive powders: A comparative study of traditional and new testing methods, Powder Technology, 253 (2014) 406–423. DOI: 10.1016/j.powtec.2013.11.04510.1016/j.powtec.2013.11.045 ↗
8. Lewicki P.P., The applicability of the GAB model to food water sorption isotherms, International Journal of Food Science & Technology, 32 (1997) 553–557. DOI: 10.1111/j.1365-2621.1997.tb02131.x10.1111/j.1365-2621.1997.tb02131.x ↗
9. Lumay G., Traina K., Boschini F., Delaval V., Rescaglio A., Cloots R., Vandewalle N., Effect of relative air humidity on the flowability of lactose powders, Journal of Drug Delivery Science and Technology, 35 (2016) 207–212. DOI: 10.1016/j.jddst.2016.04.00710.1016/j.jddst.2016.04.007 ↗
10. Maroulis Z.B., Tsami E., Marinos-Kouris D., Saravacos G.D., Application of the GAB model to the moisture sorption isotherms for dried fruits, Journal of Food Engineering, 7 (1988) 63–78. DOI: 10.1016/0260-8774(88)90069-610.1016/0260-8774(88)90069-6 ↗
11. Mathlouthi M., Rogé B., Water vapour sorption isotherms and the caking of food powders, Food Chemistry, 82 (2003) 61–71. DOI: 10.1016/S0308-8146(02)00534-410.1016/S0308-8146(02)00534-4 ↗
12. Özkan N., Walisinghe N., Chen X.D., Characterization of stickiness and cake formation in whole and skim milk powders, Journal of Food Engineering, 55 (2002) 293–303. DOI: 10.1016/S0260-8774(02)00104-810.1016/S0260-8774(02)00104-8 ↗
13. Salehi H., Barletta D., Poletto M., A comparison between powder flow property testers, Particuology, 32 (2017) 10–20. DOI: 10.1016/j.partic.2016.08.00310.1016/j.partic.2016.08.003 ↗
14. Sandler N., Reiche K., Heinämäki J., Yliruusi J., Effect of moisture on powder flow properties of theophylline, Pharmaceutics, 2 (2010) 275–290. DOI: 10.3390/pharmaceutics203027510.3390/pharmaceutics2030275 ↗
15. Shi H., Mohanty R., Chakravarty S., Cabiscol R., Morgeneyer M., Zetzener H., Ooi J.Y., Kwade A., Luding S., Magnanimo V., Effect of particle size and cohesion on powder yielding and flow, KONA Powder and Particle Journal, 35 (2018) 226–250. DOI: 10.14356/kona.201801410.14356/kona.2018014 ↗
16. Soria-Hoyo C., Valverde J.M., Castellanos A., Avalanches in moistened beds of glass beads, Powder Technology, 196 (2009) 257–262. DOI: 10.1016/j.powtec.2009.08.00810.1016/j.powtec.2009.08.008 ↗
17. Stanford M.K., DellaCorte C., Effects of humidity on the flow characteristics of PS304 plasma spray feedstock powder blend, (2002) NASA/TM-2002-211549.
18. Sun C., Improving powder flow properties of citric acid by crystal hydration, Journal of Pharmaceutical Sciences, 98 (2009) 1744–1749. DOI: 10.1002/jps.2155410.1002/jps.21554 ↗
19. Tomasetta I., Barletta D., Poletto M., The High Temperature Annular Shear Cell: A modified ring shear tester to measure the flow properties of powders at high temperature, Advanced Powder Technology, 24 (2013) 609–617. DOI: 10.1016/j.apt.2012.11.00710.1016/j.apt.2012.11.007 ↗