The Friction Stress Distribution of Loose Materials to Silo Walls in Deep Pyramidal Silos
Source abstract
Abstract
Referring to the classification of vertical silos, the classification rules for deep silos and shallow silos on pyramidal silos and conical silos have been established. Based on the basic assumptions of Janssen Formula, the friction stress distribution of loose materials to silo walls was discussed in detail on deep pyramidal silos. An analytic equation was established used the slice method. Finite element model was developed to simulate the friction stress distribution. The analytic result was almost the same with the simulation result. However, the equation yielded a minor error mainly because there were some differences between the assumptions presented in the equation and the real state of materials. Based on the simulation results, the analytic equation was revised. The results showed that the friction stress distribution of loose materials to silo walls in deep pyramidal silos was related to the material characteristics and design parameters of silo walls, as well as the material powder attribute. The revised equation precisely indicated the contact friction stress behaviors of loose materials and provided a shortcut method of calculation for related research.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Granular flow and fluidized beds · Rock Mechanics and Modeling · Mineral Processing and Grinding
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Shanxi Key Laboratory of Fully Mechanized Coal Mining Equipment, College of Mechanical Engineering, Taiyuan University of Technology, China
Funding
National Natural Science Foundation of China · Outstanding Innovative Teams of Higher Learning Institutions of Shanxi · Basic Condition Platform Project of Shanxi
References (36)
Show source-provided references
1. ACI (American Concrete Institute), ACI 313-97 & ACI 313R-97, Standard practice for design and construction of concrete silos and stacking tubes for storing granular materials (ACI 313-97) and Commentary—ACI 313R-97, ACI International, 1997.
2. Benyamine M., Djermane M., Dallozdubrujeaud B., Aussillous P., Discharge flow of a bidisperse granular media from a silo, Physical Review E Statistical Nonlinear & Soft Matter Physics, 90 (2014) 032201(8pp). https://doi.org/10.1103/PhysRevE.90.03220110.1103/PhysRevE.90.032201 ↗
3. Brown C.J., Lahlouh E.H., Rotter J.M., Experiments on a square planform steel silo, Chemical Engineering Science, 55 (2000) 4399–4413.10.1016/S0009-2509(99)00574-6 ↗
4. CEN (the European Committee for Standardization), ENV 1991-2-2: Eurocode 1: Basis of design and actions on structures. Actions on structures exposed to fire (together with United Kingdom National Application Document), Brussels, Belgium, 1995.
5. CEN (the European Committee for Standardization), EN 1991-4: Eurocode 1: actions on structures, Part 4: silos and tanks, Brussels, Belgium, 2004.
6. Colonnello C., Reyes L.I., Clément E., Gutiérrez G., Behavior of grains in contact with the wall of a silo during the initial instants of a discharge-driven collapse, Physica A: Statistical Mechanics and its Applications, 398 (2014) 35–42.10.1016/j.physa.2013.12.010 ↗
7. Couto A., Ruiz A., Herráez L., Moran J., Aguado P.J., Measuring pressures in a slender cylindrical silo for storing maize. Filling, static state and discharge with different material flow rates and comparison with Eurocode 1 part 4, Computers & Electronics in Agriculture, 96 (2013) 40–56.10.1016/j.compag.2013.04.011 ↗
8. DIN 1055, Design loads for buildings: Loads in silo bins, Beuth Verlag, Berlin, Part 6, 1987.
9. Ding S., Li H., Ooi J.Y., Rotter J.M., Prediction of flow patterns during silo discharges using a finite element approach and its preliminary experimental verification, PARTICUOLOGY, 18 (2015) 42–49.10.1016/j.partic.2014.04.015 ↗
10. Gallego E., Rombach G.A., Neumann F., Ayuga F., Simulations of granular flow in silos with different finite element programs: ANSYS vs. SILO, Transactions of the Asabe, 53 (2010) 819–829.10.13031/2013.30065 ↗
11. Gallego E., Ruiz A., Aguado P.J., Simulation of silo filling and discharge using ANSYS and comparison with experimental data, Computers & Electronics in Agriculture, 118 (2015) 281–289.10.1016/j.compag.2015.09.014 ↗
12. Goodey R.J., Brown C.J., Rotter J.M., Predicted patterns of filling pressures in thin-walled square silos, Engineering Structures, 28 (2006) 109–119.10.1016/j.engstruct.2005.08.004 ↗
13. Goodey R.J., Brown C.J., Rotter J.M., Rectangular steel silos: Finite element predictions of filling wall pressures, Engineering Structures, 132 (2017) 61–69.10.1016/j.engstruct.2016.11.023 ↗
14. Guines D., Ragneau E., Kerour B., 3D Finite-Element Simulation of a Square Silo with Flexible Walls, Journal of Engineering Mechanics, 127 (2001) 1051–1057.10.1061/(ASCE)0733-9399(2001)127:10(1051) ↗
15. Hua X., Curtis J., Guo Y., Hancock B., Ketterhagen W., Wassgren C., The internal loads, moments, and stresses in rod-like particles in a low-speed, vertical axis mixer, Chemical Engineering Science, 134 (2015) 581–598.10.1016/j.ces.2015.06.001 ↗
16. Hua X., Curtis J., Hancock B., Ketterhagen W., Wassgren C., The kinematics of non-cohesive, sphero-cylindrical particles in a low-speed, vertical axis mixer, Chemical Engineering Science, 101 (2013) 144–164.10.1016/j.ces.2013.05.063 ↗
17. Iwicki P., Rejowski K., Tejchman J., Stability of cylindrical steel silos composed of corrugated sheets and columns based on FE analyses versus Eurocode 3 approach, Engineering Failure Analysis, 57 (2015) 444–469.10.1016/j.engfailanal.2015.08.017 ↗
18. Iwicki P., Sondej M., Tejchman J., Application of linear buckling sensitivity analysis to economic design of cylindrical steel silos composed of corrugated sheets and columns, Engineering Failure Analysis, 70 (2016) 105–121.10.1016/j.engfailanal.2016.07.013 ↗
19. Jagtap P., Chakraborty T., Matsagar V., Nonlinear dynamic behavior of granular materials in base excited silos, Mechanics of Advanced Materials & Structures, 22 (2015) 313–323.10.1080/15376494.2014.947821 ↗
20. Jaky J., Pressure in silos. In Proc. 2nd International Conference on Soil Mechanics and Foundation Engineering, Rotterdam, June 21–30 (1948), 1, 103–107.
21. Janssen H.A., Versuche über getreidedruck in silozellen, Zeitschrdvereines Deutscher Ingenieure, 39 (1895) 1045–1049.
22. Jansseune A., Corte W.D., Belis J., Elastic failure of locally supported silos with U-shaped longitudinal stiffeners, Engineering Failure Analysis, 70 (2016a) 1041–1049.10.1016/j.engfailanal.2016.07.012 ↗
23. Jansseune A., Corte W.D., Belis J., Imperfection sensitivity of locally supported cylindrical silos subjected to uniform axial compression, International Journal of Solids & Structures, 96 (2016b) 92–109.10.1016/j.ijsolstr.2016.06.019 ↗
24. Li Z.F., Peng Z., Jiang Y.M., Measurements of granular pressure in silo: Janssen behaviour and deviation, Physics, 63 (2014) 104503.10.7498/aps.63.104503 ↗
25. Lozano C., Zuriguel I., Garcimartín A., Stability of clogging arches in a silo submitted to vertical vibrations, Physical Review E Statistical Nonlinear & Soft Matter Physics, 91 (2015) 062203.10.1103/PhysRevE.91.062203 ↗
26. Matchett A.J., Langston P.A., Mcglinchey D., A model for stresses in a circular silo with an off-centre circular core, using the concept of a principal stress cap: Solution for a completely filled silo and comparison with Janssen and DEM data, Chemical Engineering Research & Design, 93 (2015) 330–348.10.1016/j.cherd.2014.07.006 ↗
27. Nascimento J.W.B.d., Lopes Neto J.P., Montross M.D., Horizontal pressures in cylindrical metal silos and comparison with different international standards, Engenharia Agrícola, 33 (2013) 601–611.10.1590/S0100-69162013000400002 ↗
28. Park H.W., Kim S.T., Choung M.G., Han W.Y., Yoon W.B., Analysis of grinding kinetics and flow behavior of adzuki bean (phaseolus angularis) flour for hopper design, Journal of Food Process Engineering, 39 (2016) 366–376.10.1111/jfpe.12229 ↗
29. Rotter J.M., Brown C.J., Lahlouh E.H., Patterns of wall pressure on filling a square planform steel silo, Engineering Structures, 24 (2002) 135–150.10.1016/S0141-0296(01)00109-2 ↗
30. Sadowski A.J., Rotter J.M., Modelling and behaviour of cylindrical shell structures with helical features, Computers and Structures, 133 (2014) 90–102.10.1016/j.compstruc.2013.11.012 ↗
31. SAG (State Administration of Grain), GB50322-2001, Grain steel silo design standard, China Planning Press, Beijing, China (in Chinese), 2001.
32. Sondej M., Iwicki P., Wójcik M., Tejchman J., Stability analyses of a cylindrical steel silo with corrugated sheets and columns, Steel & Composite Structures, 20 (2016) 147–166.10.12989/scs.2016.20.1.147 ↗
33. Wang X., Qin Y., Li J., Tian Y., Yang Z., Static contact statuses between conical silos and granular materials and its influential factors, Transactions of the Chinese Society of Agricultural Engineering, 31 (2015) 65–70.
34. Wang Y., Lu Y., Jin Y.O., Finite element modelling of wall pressures in a cylindrical silo with conical hopper using an Arbitrary Lagrangian–Eulerian formulation, Powder Technol, 257 (2014) 181–190.10.1016/j.powtec.2014.02.051 ↗
35. Xia H., Wassgren C.R., Curtis J.S., Hancock B.C., Ketterhagen W.R., Yu G., Sphero-Cylindrical Particle Dynamics and Stresses in a Vertical Axis Mixer, AIChE Annual Meeting, Pittsburgh, PA, USA, 2012.
36. Xia H., Wassgren C.R., Curtis J.S., Hancock B.C., Ketterhagen W.R., Yu G., Internal Load and Moment Distributions of Rigid, Sphero-Cylindrical Particles in a Stirred Vessel, 14 Aiche Meeting, Atlanta, GA, USA, 2014.