Microstructural Evaluation of ZrB2/ZrO2 Ceramic Powders Prepared by Milling-Assisted Magnesiothermic Reduction of Oxide Raw Materials
Source abstract
Abstract
This study reports on the synthesis and microstructural evaluation of ZrB 2 /ZrO 2 ceramic powders prepared by milling-assisted magnesiothermic reduction of oxide raw materials. Powder blends containing ZrO 2 , B 2 O 3 and Mg reactants were milled in different type of mills at different durations and were subsequently annealed in a tube furnace under Ar atmosphere. An additional purification step (HCl leaching) was conducted on the milled and annealed samples to obtain only Zr-based products. FactSage TM thermochemical software was used in order to show a preliminary route for the experiments. The effects of milling duration (up to 100 h), milling type (a SPEX TM 8000D Mixer/Mill and a planetary ball mill), excess Mg amount (5-20 wt.%) and annealing duration (6 and 12 h) on the formation and microstructure of the products were examined. The milled, annealed and leached products were characterized using an X-ray diffractometer (XRD), stereomicroscope (SM), scanning electron microscope (SEM) and differential scanning calorimeter (DSC). Pure ZrB 2 /ZrO 2 ceramic powders having particles in size range of 200 nm-1 m and containing two different crystal structures of ZrO 2 phase (monoclinic and tetragonal) were obtained after milling in the SPEX TM 8000D Mixer/Mill for 30 h, annealing at 1200 C for 12 h and leaching with 5 M HCl.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Advanced materials and composites · Intermetallics and Advanced Alloy Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Istanbul Technical University, Faculty of Chemical and Metallurgical Engineering, Department of Metallurgical and Materials Engineering, Particulate Materials Laboratories (PML), Turkey
Funding
Istanbul Technical University Scientific Research Projects · Scientific and Technological Research Council of Turkey
References (43)
Show source-provided references
1. Ağaoğulları D., Synthesis, Development and Characterization of Some Rare-Earth Hexaboride Powders and Their Sintered Products, Ph.D. Thesis, Advisor: Prof. Dr. İsmail Duman, Graduate School of Science, Engineering and Technology, Istanbul Technical University, (2014).
2. Ağaoğulları D., Duman İ., Öveçoğlu M.L., Synthesis of LaB6 powders from La2O3, B2O3 and Mg blends via a mechanochemical route, Ceramics International, 38 (2012a) 6203–6214.10.1016/j.ceramint.2012.04.073 ↗
3. Ağaoğulları D., Balcı Ö., Gökçe H., Duman İ., Öveçoğlu M.L., Synthesis of magnesium borates by mechanically activated annealing, Metallurgical and Materials Transactions A, 43A (2012b) 2520–2533.10.1007/s11661-012-1109-5 ↗
4. Ağaoğulları D., Balcı Ö., Öveçoğlu M.L., Suryanarayana C., Duman İ., Synthesis of bulk nanocrystalline samarium hexaboride, Journal of the European Ceramic Society, 35 (2015) 4121–4136.10.1016/j.jeurceramsoc.2015.07.037 ↗
5. Ağaoğulları D., Balcı Ö., Öveçoğlu M.L., Duman İ, Preparation of LaB6 Powders via Calciothermic Reduction using Mechanochemistry and Acid Leaching, KONA Powder and Particle Journal, 33 (2016) 203–218.10.14356/kona.2016001 ↗
6. Akgün B., Çamurlu H.E., Topkaya Y., Sevinç N., Mechanochemical and volume combustion synthesis of ZrB2, International Journal of Refractory Metals and Hard Materials, 29 (2011) 601–607.10.1016/j.ijrmhm.2011.04.005 ↗
7. Balcı Ö., Ağaoğulları D., Duman İ., Öveçoğlu M.L., Carbothermal production of ZrB2-ZrO2 ceramic powders from ZrO2-B2O3/B system by high-energy ball milling and annealing assisted process, Ceramics International, 38 (2012) 2201–2207.10.1016/j.ceramint.2011.10.067 ↗
8. Basu B., Vleugels J., Biest O., Development of ZrO2-ZrB2 composites, Journal of Alloys and Compounds, 334 (2002) 200–204.10.1016/S0925-8388(01)01742-X ↗
9. Brouchu M., Gauntt B.D., Boyer L., Loehman R.E., Pressureless reactive sintering of ZrB2 ceramic, Journal of the European Ceramic Society, 29 (2009) 1493–1499.10.1016/j.jeurceramsoc.2008.08.032 ↗
10. Chamberlain A.L., Fahrenholtz W.G., Hilmas G.E., High-strength zirconium diboride-based ceramics, Journal of the American Ceramic Society, 87 (2004) 1170–1172.10.1111/j.1551-2916.2004.01170.x ↗
11. Chen L., Gu Y., Yang Z., Shi L., Ma J., Qian Y. Preparation and some properties of nanocrystalline ZrB2 powders, Scripta Materialia, 50 (2004) 959–961.10.1016/j.scriptamat.2004.01.018 ↗
12. Chen D., Zhang W., Li X., Hu P., Han J., Hong C., Han W., Microstructural feature and thermal shock behaviour of hot-pressed ZrB2-SiC-ZrO2 composite, Materials Chemistry and Physics, 116 (2009) 348–352.10.1016/j.matchemphys.2009.03.033 ↗
13. Chen B., Yang L.S., Heng H., Chen J.Z., Zhang L.F., Xu L.Q., Qian Y.T., Yang J., Additive-assisted synthesis of boride, carbide, and nitride micro/nanocrystals, Journal of Solid State Chemistry, 194 (2012) 219–224.10.1016/j.jssc.2012.05.032 ↗
14. Deng J., Cheng L., Hong Z., Su K., Zhang L., Thermodynamics of the production of condensed phases in the chemical vapor deposition process of zirconium diboride with ZrCl4–BCl3–H2 precursors, Thin Solid Films, 520 (2012) 2331–2335.10.1016/j.tsf.2011.10.004 ↗
15. El-Eskandarany MS. Mechanical alloying for fabrication of advanced engineering materials. Norwich, NY: Noyes Publications, 2001.
16. Fahrenholtz W.G., Hilmas G.E., Refractory diborides of zirconium and hafnium, Journal of the American Ceramic Society, 90 (2007) 1347–1364.10.1111/j.1551-2916.2007.01583.x ↗
17. Frazer E.J., Anthony K.E., Welch B.J., Electrodeposition of zirconium diboride from oxides dissolved in molten cryolite, Electrodeposition and Surface Treatment, 3 (1975) 169–177.10.1016/0300-9416(75)90039-5 ↗
18. Gebhardt J.J., Cree R.F., Vapor-Deposited Borides of Group IVA Metals, Journal of the American Ceramic Society, 48 (1965) 262–267.10.1111/j.1151-2916.1965.tb14733.x ↗
19. Greenwood N.N., Parish R.V., Thornton P., Metal Borides, Quarterly Reviews, Chemical Society, 20 (1966) 441–464.10.1039/qr9662000441 ↗
20. Guo S., Densification of ZrB2-based composites and their mechanical and physical properties: A review, Journal of the European Ceramic Society, 29 (2009) 995–1011.10.1016/j.jeurceramsoc.2008.11.008 ↗
21. Guo S., Hu C., Kagawa Y., Mechanochemical processing of nanocrystalline zirconium diboride powder, Journal of the American Chemical Society, 94 (2011) 3643–3647.
22. Hong C., Zhang X., Li W., Han J., Meng S., A novel functionally graded material in the ZrB2-SiC and ZrO2 system by spark plasma sintering, Materials Science and Engineering: A 498 (2008) 437–441.10.1016/j.msea.2008.08.032 ↗
23. Jalaly M., Bafghi M.S., Tamizifar M., Gotor F.J., Mechanosynthesis of nanocrystalline ZrB2-based powders by mechanically induced self-sustaining reaction method, Advances in Applied Ceramics, 112 (2013) 383–388.10.1179/1743676113Y.0000000091 ↗
24. Jalaly M., Bafghi M.S., Tamizifar M., Gotor F.J. An investigation on the formation mechanism of nano ZrB2 powder by a magnesiothermic reaction, Journal of Alloys and Compounds, 588 (2014) 36–41.10.1016/j.jallcom.2013.11.050 ↗
25. Khanra A.K., Pathak L.C., Godkhindi M.M. Double SHS of ZrB2 powder, Journal of Materials Processing Technology, 202 (2008) 386–390.10.1016/j.jmatprotec.2007.09.007 ↗
26. Li B., Deng J., Li Y., Oxidation behavior and mechanical properties degradation of hot-pressed Al2O3/ZrB2/ZrO2 ceramic composites, International Journal of Refractory Metals and Hard Materials 27 (2009) 747–753.10.1016/j.ijrmhm.2008.12.006 ↗
27. Li B., Deng J., Wu Z., Effect of cutting atmosphere on dry machining performance with Al2O3/ZrB2/ZrO2 ceramic tool, International Journal of Advanced Manufacturing Technology, 49 (2010) 459–467.
28. Li W., Zhang X., Hong C., Han W., Han J., Preparation, microstructure and mechanical properties of ZrB2–ZrO2 ceramics, Journal of the European Ceramic Society, 29 (2009) 779–786.10.1016/j.jeurceramsoc.2008.06.033 ↗
29. Malyshev V.V., Gab A.I., Theoretical fundamentals and practical implementation of electrometallurgical processes of producing disperse zirconium diboride powders and coatings, Russian Journal of Non-Ferrous Metals, 50 (2009) 485–491.10.3103/S1067821209050101 ↗
30. Melendez-Martinez J.J., Dominguez-Rodriguez A., Monteverde F., Melandri C., Portu G., Characterisation and high temperature mechanical properties of zirconium boride-based materials, Journal of the European Ceramic Society 22 (2002) 2543–2549.10.1016/S0955-2219(02)00114-0 ↗
31. Monteverde F., Guicciardi S., Bellosi A., Advances in microstructure and mechanical properties of zirconium diboride based ceramics, Material Science and Engineering: A, 346 (2003) 310–319.10.1016/S0921-5093(02)00520-8 ↗
32. Monteverde F., Progress in the fabrication of ultra-high-temperature ceramics: in-situ synthesis, microstructure and properties of a reactive hot-pressed HfB2-SiC composite, Composite Science and Technology, 65 (2005) 1869–1879.10.1016/j.compscitech.2005.04.003 ↗
33. Monteverde F., Bellosi A., Scatteia L., Processing and properties of ultra-high temperature ceramics for space applications, Material Science and Engineering: A, 485 (2008) 415–421.10.1016/j.msea.2007.08.054 ↗
34. Nettleship I., Stevens R., Tetragonal zirconia polycrystal (TZP)-A review, International Journal of High Technology Ceramics, 2 (1987) 1–32.10.1016/0267-3762(87)90060-9 ↗
35. Opeka M.M., Talmy I.G., Zaykoski J.A., Mechanical, thermal, and oxidation properties of refractory hafnium and zirconium compounds, Journal of the European Ceramic Society, 19 (1999) 2405–2414.10.1016/S0955-2219(99)00129-6 ↗
36. Radev D.D., Klissurski D., Mechanochemical synthesis and SHS of diborides of titanium and zirconium, Journal of Material Synthesis Processing, 9 (2001) 131–136.10.1023/A:1013245413840 ↗
37. Setoudeh N., Welham N.J., Formation of zirconium diboride (ZrB2) by room temperature mechanochemical reaction between ZrO2, B2O3 and Mg, Journal of Alloys and Compounds, 420 (2006) 225–228.10.1016/j.jallcom.2005.07.083 ↗
38. Suryanarayana C., Mechanical alloying and milling, Progress in Materials Science, 46 (2001) 1–184.10.1016/S0079-6425(99)00010-9 ↗
39. Qiu H.Y., Guo W.M., Zou J., Zhang G.J., ZrB2 powders prepared by boro/carbothermal reduction of ZrO2: The effects of carbon source and reaction atmosphere, Powder Technology, 217 (2012) 462–466.10.1016/j.powtec.2011.11.002 ↗
40. Zhang X., Li W., Hong C., Han W., Han J., A novel development of ZrB2/ZrO2 functionally graded ceramics for ultra-high-temperature application, Scripta Materialia, 59 (2008) 1214–1217.10.1016/j.scriptamat.2008.08.014 ↗
41. Zhang G., Guo W., Ni D., Kan Y., Ultrahigh temperature ceramics (UHTCs) based on ZrB2 and HfB2 systems: powder synthesis, densification and mechanical properties, Journal of Physics: Conference Series, 176 (2009) 012041.10.1088/1742-6596/176/1/012041 ↗
42. Zhu T., Li W., Zhang X., Hu P., Hong C., Weng L., Oxidation behavior of ZrB2-SiC-ZrO2 ceramic composites in the temperature range of 800–1200 °C, Materials Chemistry and Physics, 116 (2009a) 593–598.10.1016/j.matchemphys.2009.04.044 ↗
43. Zhu T., Li W., Zhang X., Hu P., Hong C., Weng L., Damage tolerance and R-curve behavior of ZrB2-ZrO2 composites, Material Science and Engineering: A, 516 (2009b) 297–301.10.1016/j.msea.2009.03.023 ↗