Preparation of Composite Powder and Properties by Surface Modification of Inorganic Pigments for Papermaking
Source abstract
Abstract
In this study, functional composite-pigment was prepared by a dry impact-blending method, using the inorganic materials used for coating of titanium dioxide, GCC, clay, and talc. After considering the particle size of inorganic pigment, the selected core powder and fine powder were mixed at a suitable mixing ratio. When powder was electrified, their fine particles could adhere by static electricity on the larger ones termed ‘core particles’, and then form an ordered mixture. During the surface modification of pigments, the energy caused by fine powder adhering to core particles was measured, and utilized in examining the efficiency of the change of particle size surface modification. Afterward, these were susceptible to being composited by impact force, resulting from very high-speed air circulation. After putting these surface modified pigments in water, their static electricity properties were measured by particle charge detector and Zeta potential tester. From these results, it was revealed that the elemental powder properties of papermaking inorganic pigment could be improved.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Pigment Synthesis and Properties · Dyeing and Modifying Textile Fibers · TiO2 Photocatalysis and Solar Cells
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Paper Science & Engineeering, Kangwon National University, Korea
Hankuk Paper R&D Center, Korea
Funding
Kangwon National University
References (30)
Show source-provided references
1. Cho J.H., Min D.J., Surface Modification of pigment for papermaking by hybridizer, Theories and Applications of Chemical Engineering, 6 (2000) 3569.
2. Cho J.H., Min D.J., Lee J.M., Hmamda K., Fluidity consideration by surface modification of inorganic pigment, Theories and Applications of Chemical Engineering, 19 (2001a) 13–25.
3. Cho J.H., Min D.J., Ushijima Y., Yoo T.I., Powder surface modification technology, Workshop Series of Chem. Eng., 2 (2001b) 95–108.
4. Hersey J.A., Ordered mixing: a new concept in powder mixing, Powder Technology, 11 (1975) 41–44.10.1016/0032-5910(75)80021-0 ↗
5. Hersey J.A., Preparation properties ordered mixtures, Aust. Journal of Pharmaceutical Sciences, 6 (1977) 29–31.
6. Honda H., Preparations of composite and encapsulated powder particles by dry impact blending, Research Paper, 18 (1992) 96–101.
7. Honda F., Honda H., Koishi M., Application of non-porous silica ultra-micro spheres to high-performance liquid chromatographic column pickings, Journal of Chromatography, 609 (1992) 49–55.10.1016/0021-9673(92)80148-N ↗
8. Honda H., Kimura M., Honda F., Matsuno T., Koishi M., Preparation of composite and encapsulated powder particles by dry impact blending, International Journal of Chemistry and Biotechnology, 9 (1991) 21.
9. Honda H., Matsuno T., Koishi M., Preparation of a graphite fluoride modified polymer microsphere by a high speed impact treatment method, Journal of the Society of Powder Technology Japan, 25 (1988) 597–602.10.4164/sptj.25.597 ↗
10. Honda H., Matsuno T., Koishi M., The effect of powder properties on dry impact blending preparation method, Journal of the Society of Powder Technology Japan, 25 (1989) 666–671.10.4164/sptj.26.666 ↗
11. Honda H., Ono K., Ishizaka T., Matsuno T., Katano M., Surface modification of powders by the high speed impact treatment method, Journal of the Society of Powder Technology Japan, 24 (1987) 593–599.10.4164/sptj.24.593 ↗
12. Ishizaka T., Honda H., Koishi M., Drug Dissolution from starch Hybrid Powders Prepared by the dry Impact Blending Method, Journal of Chromatography, 26 (1992) 82–88.
13. Kangwantrakool S., Shinohara K., Preparation of new WC-Co/TiC-AL2O3 composite materials with mechanically coated particles, Journal of Chemical Engineering of Japan, 34 (2001) 1486–1492.10.1252/jcej.34.1486 ↗
14. Kim C.K., Lee Y.K., Effects of Blending Ratio of Pigments, Journal of Korea TAPPI, 33 (2001) 25–39.
15. Lee S.R., Seul S.D., The Synthesis and Characterization of Core-Shell Emulsion Polymers 2 Inorganic/organic core-shell polymer, Journal of Korean Industry Engineering Chemical, 13 (2002) 125–149.
16. Lee Y.K., Jeong K.M., Effect of Mixing Ratio of Pigment on the packing Structure and Optical Properties of Coated Paper, Journal of Korea TAPPI, 32 (2000) 135–144.
17. Mujumdar A., Wei D., Dave R.N., Pfeffer R., Wu C.Y., Improvement of humidity resistance of magnesium powder using dry particle coating, Powder Technology, 140 (2004) 86–97.10.1016/j.powtec.2003.12.011 ↗
18. Ohashi S., Yamamoto K., Aono M., Kobuko T., Yamachi I., Antibacterial activity of silver ion implanted into silver filler, 74 (1995) 968–973.
19. Ouabbas Y., Chamayou A., Galet L., Baron M., Thomas G., Grosseau P., Guilhot B., Surface modification of silica particle by dry coating, Powder Technology, 190 (2009) 200–209.10.1016/j.powtec.2008.04.092 ↗
20. Pertti A., Talc as a coating pigment in lightweight coated papers, TAPPI Journal, 11(1985) 68–235.
21. Pfeffer R., Dave R.N., Dongguang W., Ramlakhan M., Synthesis of engineered particulates with tailored properties using dry particle coating, Powder Technology, 117 (2001) 40–67.10.1016/S0032-5910(01)00314-X ↗
22. Tatami J., Nakano H., Wakihara T., Komeya K., Development of Advanced Ceramics by Powder Composite Process, KONA Powder and Particle Journal, 28 (2010) 227–240.10.14356/kona.2010020 ↗
23. Willets W.R, Bingham R.T, Maechetti F.R., Paper Coating Pigments, TAPPI Monograph, 20 (1958) 211–231.
24. Yang J., Sliva A., Banerjee A., Dave R.N., Pfeffer R., Dry particle coating for improving the of flowability of cohesive powders, Powder Technology, 158 (2005) 21–33.10.1016/j.powtec.2005.04.032 ↗
25. Yeung C.C., Hersey J.A., Ordered powder mixing course fine particulate systems, Powder Technology, 22 (1979) 127–131.10.1016/0032-5910(79)85015-9 ↗
26. Yip C.W., Hersey J.A., Ordered random mixing choice system mixer, Drug Development and Industrial Pharmacy, 3 (1977a) 429–438.10.3109/03639047709055622 ↗
27. Yip C.W., Hersey J.A., Perfect powder mixtures, Powder Technology, 16 (1977b) 189–192.10.1016/0032-5910(77)87005-8 ↗
28. Yip C.W., Hersey J.A., Segregation ordered powder mixtures, Powder Technology, 16 (1977c) 149–150.10.1016/0032-5910(77)85034-1 ↗
29. Yoshihara I., Pieper W., Hybridization technology for surface modification of powders without binders, Swiss Pharma, 6 (1999) 21.
30. Zhao J., Yang X., Photocatalytic oxidation for indoor air purification, literature review, Building and Environment, 38 (2003) 38–49.