journal article·1988Open access

Comparing the Flow Properties of Bulk Solids by Tri-axial Shear, Unconfined Yield and Direct Shear Tests [Translated]†

Hiroshi Tsunakawa, Daizo Kunii, Fumito Takagi, Minoru Sugita, Tomio Tamura, Hideto Haze

Abstract

This paper discusses a comparison of the data of experiments obtained by using different shear tests methods in order to examine the confidence in the results of experiments on the flow properties of a bulk solid. The angle of internal friction of dry granular materials, which has been measured by both a tri-axial shear tester and a fixed volume direct shear tester, increases with a decrease in the voidage of the specimen. Except for the extremely dense and loosely packed states, the experimental results of the angle of internal friction agree within about 3 degrees. There is however a difference of 3 to 5 degrees for a material in which the particle shape is deflective. The flowability index of cohesive powders and wet materials is expressed by a ratio of the unconfined yield strength to the bulk density. The results of experiments on the flowability index are independent of the unconfined yield and direct shear tests.† This report was originally printed in J. Soc. Powder Technology, Japan, 23(9), 678-684 (1986) in Japanese, before being translated into English by KONA Editorial Committee with the permission of the editorial committee of the Soc. Powder Technology, Japan.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Granular flow and fluidized beds · Soil and Unsaturated Flow · Rheology and Fluid Dynamics Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Dept. of Chemical Engineering, Yokohama National University

Institute of Technology, Shimizu Construction Co., Ltd.

Technical Research Institute, Mitsui Construction Co., Ltd.

References

Reference metadata was not supplied for this record.