journal article·2011Open access

In-situ Characterization of Drying Particulate Coatings

Masato Yamamura

KONA Powder and Particle Journal· Volume 29· Issue 0

Abstract

Film thin drying is a process to create functional interfaces in solidifying liquids, rather than to separate volatile components from solutions or suspensions. Indeed, recent developments in coating technologies have shed light on self-organization in evaporating complex thin fluids. In particulate coatings, final properties of dried film depend not only on initial liquid compositions but also the imposed drying conditions, which significantly influence local particle distributions, contact area of rigid and/or deformable particles, anisotropic particle orientation, and amounts of adsorbed molecules on particle surfaces. It is of importance to understand how a directional film shrinkage and spontaneous solidification constrain the particle motions, and how they induce particular film structures in a non-equilibrium state. Recently, there has been a great deal of progress in measurement techniques and numerical approaches for analyzing transient structures in evaporating thin liquid films. This article presents an overview of current research activities on local, in-situ determination of (i) fluid properties at air-liquid and liquid-liquid interfaces, and (ii) distributions of particles or solutes in the thickness direction in shrinking films.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Fluid Dynamics and Thin Films · Nanomaterials and Printing Technologies · nanoparticles nucleation surface interactions

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Applied Chemistry, Kyushu Institute of Technology

Funding

Japan Society for the Promotion of Science

References (63)

Show source-provided references
1. 1) Nishio, T., and Nagasaka, Y. ((1995)): Simultaneous Measurement of surface tension and kinematic viscosity using thermal fluctuations, International Journal of Thermophysics, 16, pp. 1087–1097.10.1007/BF02081277 ↗
2. 2) Oki, K., and Nagasaka, Y. (2008): Dynamic Observation of the Behavior of the Surface of Liquid Films of Polymer–Organic Solvent System by Ripplon Surface Laser-Light Scattering Method, Kagaku Kogaku Ronbunshu, 34, pp. 587–593.10.1252/kakoronbunshu.34.587 ↗
3. 3) Oki, K. and Nagasaka, Y. ((2009)): Measurements of anisotropic surface properties of liquid films of azobenzene derivatives, Colloids and Surfaces A: Physicochem. Eng. Aspects, 333, pp. 182–186.10.1016/j.colsurfa.2008.09.041 ↗
4. 4) Sakai, K., Mizuno, D., and Takagi, K. (2001): Measurement of liquid surface properties by laser-induced surface deformation spectroscopy, Physical Review E, 63, 046302.10.1103/PhysRevE.63.046302 ↗
5. 5) Yoshitake, Y., Mitani, S., Sakai, K., and Takagi, K. (2005): Measurement of high viscosity with laser induced surface deformation technique, Journal of Applied Physics, 97, 024901-1–024901-6.10.1063/1.1839640 ↗
6. 6) Sakai, K., Tachibana, K., Mitani. S., Takagi, K. (2003): Laser excitation of high-frequency capillary waves, Journal of Colloid and Interface Science, 264, pp.446–451.10.1016/S0021-9797(03)00448-X ↗
7. 7) Mitani, S., and Sakai, K. (2002): Measurement of ultralow interfacial tension with a laser interface manipulation technique, Physical Review E, 66, 031604.10.1103/PhysRevE.66.031604 ↗
8. 8) Yamamura, M., Uchinomiya, T., Mawatari, Y., and Kage, H. (2007): Asymmetric surface roughness formation on moving non-isothermal liquid coatings, International Polymer Processing, 22, pp. 22–26.10.3139/217.0062 ↗
9. 9) Yamamura, M. Uchinomiya, T., Mawatari, Y., and Kage, H. (2009): Drying-induced Surface Roughening of Polymeric Coating under Periodic Air Blowing, AIChE Journal, 55, pp. 1648–1658.10.1002/aic.11783 ↗
10. 10) Cairncross, R.A, Jeyadev, S, Dunham, R.F, Evans, K, Francis, L.F. and Scriven, L.E. (1995): Modeling and design of an industrial dryer with convective and radiant heating. Journal of Applied Polymer Science, 58, pp. 1279–1290.10.1002/app.1995.070580809 ↗
11. 11) Price, PE Jr, and Cairncross, R.A. (1999): Optimization of single-zone drying of polymer solution coatings to avoid blister defects, Drying Technology, 17, pp. 1303–1311.10.1080/07373939908917616 ↗
12. 12) Wong, S.S, Altinkaya, SA. and Mallapragada, S.K, (2004): Drying of semicrystalline polymers: mathematical modeling and experimental characterization of poly(vinyl alcohol films, Polymer, 45, pp. 5151–5161.10.1016/j.polymer.2004.05.037 ↗
13. 13) Cairncross, R.A, Francis, L.F. and Scriven, L.E. (1996): Predicting drying in coatings that react and gel:drying regime maps, AIChE Journal, 42, pp. 55–67.10.1002/aic.690420107 ↗
14. 14) Alsoy, S. and Duda, J.L. (2002): Influence of swelling and diffusion-induced convection on polymer sorption processes, AIChE Journal, 48, pp. 1849–1855.10.1002/aic.690480903 ↗
15. 15) Vinjamur, M. and Cairncross, R.A. (2002): Non-Fickian nonisothermal model for drying of polymer coatings, AIChE Journal, 48, pp. 2444–2458.10.1002/aic.690481104 ↗
16. 16) Okuzono, T. Ozawa, K. and Doi, M. (2006): Simple model of skin formation caused by solvent evaporation in polymer solutions, Physical Review Letters, 97, 136103-1–136103-4.10.1103/PhysRevLett.97.136103 ↗
17. 17) Schabel, W., Ludwig, I. and Kind, M. (2004): Measurements of concentration profiles in polymeric solvent coatings by means of an inverse confocal micro Raman spectrometer-initial results, Drying Technology, 22, pp. 285–294.10.1081/DRT-120028234 ↗
18. 18) Krenn, J., Scharfer, P., Kind, M., and Schabel, W. (2009): Drying of solvent-borne coatings with pre-loaded drying gas, Eur. Phys. J., 166, pp. 45–48.10.1140/epjst/e2009-00876-0 ↗
19. 19) Ludwig, I., Schabel, W., Kind, M., Castaing, J.C., and Ferlin, P. (2007): Drying and Film Formation of Industrial Waterborne Latices, AIChE Journal, 53, pp. 549–560.10.1002/aic.11098 ↗
20. 20) Arnold, C., Thalmann, F., Marques, C., Marie, P. and Holl, Y. (2010): Surfactant distribution in waterborne acrylic films. 1. Bulk Investigation, Journal of Physical Chemistry B, 114, pp. 9135–9147.10.1021/jp103347n ↗
21. 21) Gorce, J.P., Bovey, D., McDonald, P. J., Palasz, P., Taylor, D. and Keddie, J.L. (2002): Vertical water distribution during the drying of polymer films cast from aqueous emulsions, European Physical Journal E, 8, pp. 421–429.10.1140/epje/i2002-10023-3 ↗
22. 22) Cardinal, C.M., Jung, Y.D., Ahn, K.H. and Francis, L. F. (2010): Drying regime maps for particulate coatings, AIChE Journal, 56, pp. 2769–2780.10.1002/aic.12190 ↗
23. 23) Sutanto, E., Ma, Y., Davis, H.T. and Scriven, L.E. (2001): Cryogenic Scanning Electron Microscopy of early stages of film formation in drying latex coatings, ACS Symposium Series, 790, pp. 174–192.10.1021/bk-2001-0790.ch010 ↗
24. 24) Ma, Y., Davis, H.T. and Scriven, L.E. (2005): Microstructure development in drying latex coatings, Progress in Organic Coatings, 52, pp. 46–62.10.1016/j.porgcoat.2004.07.023 ↗
25. 25) Cardinal, C.M., Francis, L.E., Scriven, L.E. (2009): Drying and collapse of hollow latex, Journal of Coatings Technology and Research, 6, pp. 457–469.10.1007/s11998-009-9167-3 ↗
26. 26) Buss, F., Roberts, C.C., Crawford, K.S., Peters, K. and Francis, L. (2011): Effect of soluble polymer binder on particle distribution in a drying particulate coating, Journal of Colloid and Interface Science, 359, pp.112–120.10.1016/j.jcis.2011.03.054 ↗
27. 27) Guigner, D., Fischer, C. and Holl, Y. (2001): Film formation from concentrated reactive silicone emulsions. 1. Drying mechanism, Langmuir, 17, pp. 3598–3606.10.1021/la001711d ↗
28. 28) Routh, A.F., Zimmerman, W.B. (2004): Distribution of Particles during Solvent Evaporation from Films, Chemical Engineering Science, 59, pp. 2961–2968.10.1016/j.ces.2004.04.027 ↗
29. 29) Fujita, M. and Yamaguchi, Y. (2007): Simulation of 3D Crystallization of Colloidal Nanoparticles on a Substrate during Drying, International Polymer Processing, 22, pp. 16–21.10.3139/217.0988 ↗
30. 30) Ohta, S., Inasawa, S., Koike, O., Fujita, M. and Yamaguchi, Y. (2009): Formation of well-aligned thin films of rod-like nanoparticles via solvent evaporation: a simulation study, Applied Physics Express, 2, 065002-1–065002-3.10.1143/APEX.2.065002 ↗
31. 31) Gundabala, V., W.B., Zimmerman, A.F. and Routh, (2004): A model for surfactant distribution in latex coatings, Langmuir, 20, 8721.10.1021/la048939b ↗
32. 32) Zielinski, J.M. and Hanley, R.F. (1999): Practical friction-based approach to modeling multicomponent diffusion, AIChE Journal, 45, pp. 1–12.10.1002/aic.690450102 ↗
33. 33) Price, P.E. Jr. and Romdhane, I.H. (2003): Multicomponent diffusion theory and its application to polymer-solvent systems, AIChE Journal, 49, pp. 309–322.10.1002/aic.690490204 ↗
34. 34) Yamamura, M., Kajiwara, T. and Kage, H. (2003): Multicomponent diffusion in phase separating polymer blends with different frictional interactions: a meanfriction model, Chemical Engineering Science, 58, pp. 3891–3899.10.1016/S0009-2509(03)00313-0 ↗
35. 35) Corcoran, E.M. (1969): Determining Stresses in Organic Coatings using Plate Beam Deflection, Journal of Paint Technology, 41, pp. 635–640.
36. 36) Perera, D.Y. and Eynde, D.V. (1981): Considerations on a Cantilever (Beam) Method for Measuring the Internal Stress in Organic Coatings, Journal of Coating Technology, 53, pp. 39–44.
37. 37) Chiu, R.C. and Cima, M. J. (1993): Drying of Granular Ceramic Films; II, Drying Stress and Saturation Uniformity, Journal of American Ceramic Society, 76, pp. 2769–2777.10.1111/j.1151-2916.1993.tb04014.x ↗
38. 38) Lewis, J.A., Blackman, K.A., Ogden, A. L., Payne, J.A. and Francis, L.F. (1996): Rheological Property and Stress Development during Drying of Tape-Cast Ceramic Layers, Journal of American Ceramic Society, 79, pp. 3225–3234.10.1111/j.1151-2916.1996.tb08099.x ↗
39. 39) Payne, J.A., McCormick, A.V. and Francis, L.F. (1997): In situ stress measurement apparatus for liquid applied coatings, Rev. Sci. Instrum., 68, pp. 4564–4568.10.1063/1.1148432 ↗
40. 40) Payne, J.A., Francis, L.F. and McCormick, A.V. (1997): The effects of Processing Variables on Stress Development in Ultraviolet-Cured Coatings, Journal of Applied Polymer Science, 66, pp. 1267–1277.10.1002/(SICI)1097-4628(19971114)66:7<1267::AID-APP6>3.0.CO;2-E ↗
41. 41) Petersen, C., Heldmann, C. and Johannsmann, D. (1999): Internal Stresses during Film Formation of Polymer Latices, Langmuir, 15, pp. 7745–7751.10.1021/la990256m ↗
42. 42) Lei, H., Payne, J.A., McCormick, A.V., Francis, L.F., Gerberich, W.W. and Scriven, L.E. (2001): Stress development in drying coatings, Journal of Applied Polymer Science, 81, pp. 1000–1013.10.1002/app.1522 ↗
43. 43) Lei, H., Francis, L.F., Gerberich, W.W. and Scriven, L.E. (2002): Stress development in drying coatings after solidification, AIChE Journal, 48(3), pp.437–451.10.1002/aic.690480304 ↗
44. 44) Francis, L.F., McCormick, A.V. and Vaessen, D.M. (2002): Development and Measurement of Stress in Polymer Coatings, Journal of Materials Science, 37, pp. 4717–4731.10.1023/A:1020886802632 ↗
45. 45) Martinez, C.J. and Lewis, J.A. (2002): Shape Evolution and Stress Development during Latex-Silica Film Formation, Langmuir, 18, pp. 4689–4698.10.1021/la0114833 ↗
46. 46) Tirumkudulu, M.S. and Russel, W.B. (2004): Role of Capillary Stresses in Film Formation, Langmuir, 20, pp. 2947–2961.10.1021/la0356250 ↗
47. 47) Wedin, P., Martinez, C.J., Lewis, J.A., Daicic, J. and Bergstrom, L. (2004): Stress Development during Drying of Calcium Carbonate Suspensions Containing Carboxymethylcellulose and Latex Particles, Journal of Colloid and Interface Science, 272, pp. 1–9.10.1016/j.jcis.2003.12.030 ↗
48. 48) Wedin, P., Lewis, J.A. and Bergstrom, L. (2005): Soluble Organic Additive Effects on Stress Development during Drying of Calcium Carbonate Suspensions, Journal of Colloid and Interface Science, 290, pp. 134–144.10.1016/j.jcis.2005.04.020 ↗
49. 49) Kiennemann, J., Chartier, T., Pagnoux, C., Baumard, J.F., Huger, M., and Lamerant, J.M. (2005): Drying Mechanisms and Stress Development in Aqueous Alumina Tape Casting, Journal of European Ceramic Society, 25, pp. 1551–1564.10.1016/j.jeurceramsoc.2004.05.028 ↗
50. 50) Lan, W. and Xiao, P. (2007): Drying Stress of Yttria-Stabilized-Zirconia Slurry on a Metal Substrate, Journal of the European Ceramic Society, 27, pp. 3117–3125.10.1016/j.jeurceramsoc.2007.01.005 ↗
51. 51) Kim, S., Sung, J.H., Ahn, K.H. and Lee, S.J. (2009): Drying of the silica/PVA suspension: effect of suspension microstructure, Langmuir, 25, pp. 6155–6161.10.1021/la804112b ↗
52. 52) Shiga, T., Narita, T., Tachi, K., Okada, A., Takahashi, H. and Kurauchi, T. (1997): Measurement of Internal Stresses in Coatings Using Time Resolved Fluorescence, Polymer Engineering and Science, 37, pp. 24–30.10.1002/pen.11642 ↗
53. 53) Shiga, T., Narita, T., Ikawa, T. and Okada, A. (1998): Stress Monitoring in Thin Polymer Coatings Using Time Resolved Fluorescence, Polymer Engineering and Science, 38, pp. 693–698.10.1002/pen.10234 ↗
54. 54) Stolov, A.A., Xie, T., Penelle, J. and Hsu, S.L. (2001): An Analysis of Photopolymerization Kinetics and Stress Development in Multifunctional Acrylate Coatings, Polymer Engineering and Science, 41, pp. 314–328.10.1002/pen.10731 ↗
55. 55) Stolov, A.A., Xie, T., Penelle, J. and Hsu, S.L. (2000): Simultaneous Measurement of Polymerization Kinetics and Stress Development in Radiation-Cured Coatings: A New Experimental Approach and Relationship between the Degree of Conversion and Stress, Macromolecules, 33, pp. 6970–6976.10.1021/ma000402r ↗
56. 56) Koenig, A.M., Bourgeat-Lami, E., Mellon, V., von der Ehe, K., Routh, A.F. and Jahannsmann, D. (2010): Dilational lateral stress in drying latex films, Langmuir, 26, pp. 3815–3820.10.1021/la9041937 ↗
57. 57) Suzuki, I., Yasui, Y., Udagawa, A. and Kawate, K. (2004): Drying process monitoring by rapid scanning FT-IR spectrometer, Industrial Coating Research, 5, pp. 107–123.
58. 58) Yamamura, M., Horiuchi, K., Kajiwara, T., and Adachi, K. (2002): Decrease in solvent evaporation rate due to phase separation in polymer films, AIChE Journal, 48, pp. 2711–2714.10.1002/aic.690481127 ↗
59. 59) Imakoma, H., Nagaoka, S., and Takigawa, T. (2007): Measurement of drying rate of water-based coat by temperature change method, Kagaku Kogaku Ronbunshu, 33, pp. 586–592.10.1252/kakoronbunshu.33.586 ↗
60. 60) Yamamura, M. Ohara, K., Mawatari, Y., and Kage, H. (2009): Measuring the drying rate of liquid film coatings using heat-flux method, Drying Technology, 27, pp. 817–820.10.1080/07373930902901687 ↗
61. 61) Vinjamur, M., and Cairncross, R. (2001): A high airflow drying experimental set-up to study drying behavior of polymer solvent coatings, Drying Technology, 19, pp. 1591–1612.10.1081/DRT-100107261 ↗
62. 62) Miyake, Y., Sekiguchi, Y., and Kohjiya, S. (1993): Formation of percolated structure during solvent casting of polymer blend-solvent systems, Kagaku Kogaku Ronbunshu, 26, pp. 543–550.10.1252/jcej.26.543 ↗
63. 63) Ermi, B.D., Nisato, G., Douglas, J.F., Rogers, J.A. and Karim., A. (1998): Coupling between phase separation and surface deformation modes in self-organizing polymer blend films, Physical Review Letters, 81, pp. 3900–3903.10.1103/PhysRevLett.81.3900 ↗