Formation of Nanoscale Layered Structures and Subsequent Transformations during Mechanical Alloying of Ni60Nb40 Powder Mixture in a Low Energy Ball Mill
Source abstract
Abstract
Elemental Ni-Nb powder mixture containing 40 atom % Nb were mechanically alloyed in a low energy ball mill, allowing slower processing and easier progressive observation at intermediate milling times. The evolution of morphology and structure of the powders were investigated as a function of milling time by transmission and scanning electron microscopy and X-ray diffractometry. The results revealed that an ultrafine Ni/Nb layered structure with a typical thickness of ~30 nm, containing nanoscale size grains with a typical size of ~15 nm, develops in powder particles during mechanical alloying. This microstructure provides numerous high speed diffusion paths such as sub-grain boundaries and dislocation networks, allowing a high diffusion rate at low temperature and therefore permits different solid-state reactions to take place kinetically. Under mechanical alloying conditions used here continued milling led to a fully amorphous structure. Because of non-uniform plastic deformation the kinetic requirements for the amorphization reaction at the edges of particles is satisfied prior to the centres, resulting in an inhomogeneous progress of amorphization reaction from the edges towards the centres of particles.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Metallic Glasses and Amorphous Alloys · Intermetallics and Advanced Alloy Properties · High Entropy Alloys Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Materials Engineering, Isfahan University of Technology, Iran
References (6)
Show source-provided references
1. Dunlap R.A., Small D.A., MacKay G.R., O’Brien J.W., Dahn J.R., Cheng Z.H., Materials preparation by ball milling, Canadian Journal of Physics, 78 (2000) 211–229.10.1139/p99-067 ↗
2. Koch C.C., Cavin O.B., Mckamey C.G., Scarbrough J.O., Preparation of amorphous Ni60Nb40 by mechanical alloying, Applied Physics Letters, 43 (1983) 1017–1019.10.1063/1.94213 ↗
3. Petzoldt F., Synthesis and process characterization of mechanically alloyed amorphous Ni-Nb powders, Journal of Less-Common Metals, 140 (1988) 85–92.10.1016/0022-5088(88)90370-0 ↗
4. Takacs L., Self-sustaining reactions induced by ball milling, Progress in Materials Science, 47 (2002) 355–414.10.1016/S0079-6425(01)00002-0 ↗
5. Williamson G.K., Hall W.H., X-ray line broadening from filed aluminium and wolfram, Acta Metallurgica, 1 (1953), 22–31.10.1016/0001-6160(53)90006-6 ↗
6. Zhang D.L., Processing of advanced materials using high-energy mechanical milling, Progress in Materials Science, 49(2004) 537–560.10.1016/S0079-6425(03)00034-3 ↗