Decoration of Carbon Nanotubes by Semiconducting or Metallic Nanoparticles using Fluidized Bed Chemical Vapour Deposition
Source abstract
Abstract
Multi-Walled Carbon Nanotubes (MWCNTs) have promising properties that make them potentially useful in a wide variety of applications. The decoration of MWCNTs by metallic or semiconducting nanoparticles aims to intensify some of their properties, in particular thermal and electrical conductivity. Fluidized Bed Chemical Vapour Deposition (FBCVD) is an efficient process to uniformly coat powders by various materials. The coating by SnO2, Fe and Si nanoparticles of MWCNTs (Graphistrength®) tangled in balls of 360 microns in mean diameter using the FBCVD process has been studied. The influence of some deposition parameters with and without oxidative pre-treatment is analysed on the nucleation and growth of nanoparticles. The various results obtained indicate that the intrinsic surface reactivity of MWCNTs is high enough for CVD precursors involving the formation of highly reactive unsaturated species such as silylene SiH2 formed from silane SiH4 pyrolysis in the case of Si deposition. But it must be enhanced for less reactive CVD precursors such as tin tetrachloride SnCl4 which needs the presence of oxygen-containing groups at the nanotube surface to allow Sn nucleation. So, provided the reactivity of the powder surface and that of the CVD precursors are well tuned, the FBCVD process can uniformly coat the outer surface of MWCNTs by metallic or semiconducting nanoparticles.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Carbon Nanotubes in Composites · Graphene research and applications · Electrohydrodynamics and Fluid Dynamics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Université de Toulouse, Laboratoire de Génie Chimique, France
Centre d’Élaboration de Matériaux et d’Etudes Structurales (CEMES), UPR-8011 CNRS, France
Funding
Conseil Régional Midi-Pyrénées · Fonds Unique Interministériel
References (44)
Show source-provided references
1. Ajayan P.M., Ebbesen T.W., Ichihashi T., Iijima S., Tanagaki K., Hiura H., Opening carbon nanotubes with oxygen and implications for filling, Nature, 362 (1993) 522–525.10.1038/362522a0 ↗
2. Babal A.S., Gupta R., Singh B.P., Singh V.N., Dhakate S.R., Mathur R.B., Mechanical and electrical properties of high performance MWCNT/polycarbonate composites prepared by an industrial viable twin screw extruder with back flow channel, RSCAdv., 4 (2014) 64649–64650.10.1039/C4RA11319E ↗
3. Bacsa R., Serp P., Decorated (coated) carbon nanotubes, in: Monthioux M. (Ed.), Carbon meta-nanotubes, synthesis, properties and applications, Wiley, 2012, pp. 163–207.10.1002/9781119954743.ch4 ↗
4. Behler K., Osswald S., Ye H., Dimovski S., Gogotsi Y., Effect of thermal treatment on the structure of multiwall carbon nanotubes, J. Nanopart. Res., 8 (2006) 615–625.10.1007/s11051-006-9113-6 ↗
5. Bhatia R., Prasad V., Synthesis of multiwall carbon nanotubes by chemical vapour deposition of ferrocene alone, Solid State Commun., 150 (2010) 311–315.10.1016/j.ssc.2009.11.023 ↗
6. Braga A.F., Moreira S.P., Zampieri P.R., Bacchin J.M.G., Mei P.R., New processes for the production of solar-grade polycrystalline silicon: a review, Solar En. Mat. Solar Cells, 92 (2008) 418–424.10.1016/j.solmat.2007.10.003 ↗
7. Coppey N., Nanotubes de carbone décorés par CVD en lit fluidisé: application en batterie lithium-ion, PhD thesis, INP Toulouse, France, 2013.
8. Cui L.F., Hu L., Choi J.W., Cui Y., Light-weight free-standing carbon nanotube-silicon films for anodes of lithium ion batteries, ACSNano, 4 (2010) 3671–3678.10.1021/nn100619m ↗
9. Dasgupta K., Joshi J.B., Banerjee S., Fluidized bed synthesis of carbon nanotubes—A review, Chem. Eng. J., 171 (2011) 841–869.10.1016/j.cej.2011.05.038 ↗
10. Dormans G.J.M., OMCVD of transition metals and their silicides using metallocenes and (di)silane or silicon tetra-bromide, J. Cryst. Growth, 5 (1991) 806–816.10.1016/0022-0248(91)90261-3 ↗
11. Emel’yanenko V.N., Verevkin S.P., Krol O.V., Varushchenko R.M., Chelovskaya N.V., Vapour pressures and enthalpies of vapourization of a series of the ferrocene derivatives, J. Chem. Thermodyn., 39 (2007) 594–601.10.1016/j.jct.2006.09.001 ↗
12. Feng M., Puddephatt R.J., Chemical Vapour Deposition of nickel-group metals on multiwall carbon nanotubes, Can. J. Chem., 85 (2007) 645–650.10.1139/v07-014 ↗
13. Geldart D., Types of gas fluidization, Powder Techn., 7 (1973) 285–292.10.1016/0032-5910(73)80037-3 ↗
14. Goulas A., Ruud van Ommen J., Scalable production of nano-structured particles using atomic layer deposition, Kona Powder and Particle Journal, 31 (2014) 234–246.10.14356/kona.2014013 ↗
15. Kim J.H., Min B.G., Functionalization of multi-walled carbon nanotube by treatment with dry ozone gas for the enhanced dispersion and adhesion in polymeric composites, Carbon Lett., 11 (2010) 298–303.10.5714/CL.2010.11.4.298 ↗
16. Kuang Q., Li S.F., Xie Z.X., Lin S.C., Zhang X.H., Xie S.Y., Huang R.B., Zheng L.S., Controllable fabrication of SnO2-coated multiwalled carbon nanotubes by Chemical Vapour Deposition, Carbon, 44 (2006) 1166–1172.10.1016/j.carbon.2005.11.001 ↗
17. Kunii D., Levenspiel O., Fluidization engineering, second edition, John Wiley & sons Inc., New York, 1991.
18. Li C., Hua B., Preparation of nanocrystalline SnO2 thin film coated Al2O3 ultrafine particles by fluidized chemical vapour deposition, Thin Solid Films, 310 (1997) 238–243.10.1016/S0040-6090(97)00400-8 ↗
19. Li C., Zhao A., Xia W., Liang C., Muhler M., Quantitative studies on the oxygen and nitrogen functionalization of carbon nanotubes performed in the gas phase, J. Phys. Chem. C, 116 (2012) 20930–20936.10.1021/jp306866q ↗
20. Lin T., Bajpai V., Ji T., Dai L., Chemistry of carbon nanotubes, Aust. J. Chem., 56 (2003) 635–651.10.1071/CH02254 ↗
21. Liu S.S., Xiao W.D., CFD-PBM coupled simulation of silicon CVD growth in a fluidized bed reactor: Effect of silane pyrolysis kinetic models, Chem. Eng. Sci., 127 (2015) 84–94.10.1016/j.ces.2015.01.026 ↗
22. Lubej M., Plazl I., Theoretical and experimental study of iron catalyst preparation by chemical vapour deposition of ferrocene in air, Chem. Eng. J., 242 (2014) 306–312.10.1016/j.cej.2013.12.038 ↗
23. McEvoy A., Markvart T., Castaner L., Solar Cells: Materials, Manufacture and Operation, Elsevier, second edition, 2013.
24. Mendoza F., Hernandez D.M., Makarov V., Febus E., Weiner B.R., Morell G., Room temperature gas sensor based on tin dioxide-carbon nanotubes composite films, Sensors Actuat. B, 190 (2014) 227–233.10.1016/j.snb.2013.08.050 ↗
25. Monthioux M., Serp P., Flahaut E., Laurent C., Peigney A., Razafinimanana M., Bacsa W., Broto J.M., Introduction to carbon nanotubes, in: Brushan B. (Ed.), Springer Handbook of Nanotechnology, Second revised and extended edition, Springer-Verlag, Heidelberg, 2007.10.1007/978-3-540-29857-1_3 ↗
26. Philippe R., Synthèse de nanotubes de carbone multi-parois par dépôt chimique en phase vapeur catalytique en lit fluidisé. Nouvelle classe de catalyseurs, étude cinétique et modélisation, PhD thesis, INP Toulouse, France, 2006.
27. Qian D., Dickey E.C., Andrews R., Jacques D., Kinetics of carbon nanotube growth by pyrolysis of ferrocene/xylene, Carbon, 1 (2001) 1117–1119.
28. Reuge N., Cadoret L., Caussat B., Multifluid eulerian modelling of a silicon fluidized bed Chemical Vapour Deposition process: analysis of various kinetic models, Chem. Eng. J., 148 (2009) 506–516.10.1016/j.cej.2008.12.017 ↗
29. Rong H., Liu Z., Wu Q., Lee Y.H., A facile and efficient gas phase process for purifying single-walled carbon nanotubes, Curr. Appl. Phys., 10 (2010) 1231–1235.10.1016/j.cap.2010.02.049 ↗
30. Ruan S.L., Gao P., Yang X.G., Yua T.X., Toughening high performance ultrahigh molecular weight polyethylene using multiwalled carbon nanotubes, Polymer, 44 (2003) 5643–5654.10.1016/S0032-3861(03)00628-1 ↗
31. Senocq F., Duminica D., Maury F., Delsol T., Vahlas C., Iron thin films from Fe(CO)5 and FeCp2/H2O under atmospheric pressure, J. Electrochem. Soc., 153 (2006) G1025–G1031.10.1149/1.2352050 ↗
32. Stauf G.T., Driscoll D.C., Dowben P.A., Barfuss S., Grade M., Iron and nickel thin film deposition via metallocene decomposition, Thin Solid Films, 153 (1987) 421–430.10.1016/0040-6090(87)90202-1 ↗
33. Vahlas C., Caussat B., Serp P., Angelopoulos G., Principles and applications of CVD powder technology, Mat. Sci. Eng. : Reports, 53 (2006) 1–72.10.1016/j.mser.2006.05.001 ↗
34. Van Mol A.M.B., Chemical Vapour Deposition of tin oxide thin films, Technische Universiteit Eindhoven, 2003, ISBN 90-386-2715-7.
35. Vennerberg D.C., Quirino R.L., Jang Y., Kessler M.R., Oxidation behaviour of multi walled carbon nanotubes fluidized with ozone, Appl. Mater. Interfaces, 6 (2014) 1835–1842.10.1021/am4048305 ↗
36. Wang X.S., Rahman F., Rhodes M.J., Nanoparticle fluidization and Geldart’s classification, Chem. Eng. Sci., 62 (2007) 3455–3461.10.1016/j.ces.2007.02.051 ↗
37. Wartenberg E.W., Ackermann P.W., Electrical and mechanical properties of quenched SnO2 films on glass substrates, Glastechnische Berichte, 61 (1988) 256–262.
38. Wasel W., Kuwana K., Reilly P.T.A., Saito K., Experimental characterization of the role of hydrogen in CVD synthesis of MWCNTs, Carbon, 45 (2007) 833–838.10.1016/j.carbon.2006.11.013 ↗
39. Wildgoose G.G., Banks C.E., Compton R.G., Metal nanoparticles and related materials supported on carbon nanotubes: methods and applications, Small, 2 (2006) 182–193.10.1002/smll.200500324 ↗
40. Xia W., Jin C., Kundu S., Muhler M., A highly efficient gasphase route for the oxygen functionalization of carbon nanotubes based on nitric acid vapour, Carbon, 47 (2009) 919–922.10.1016/j.carbon.2008.12.026 ↗
41. Yaws C.L., Chemical Properties Handbook, McGrawHill, 1999.
42. Yu H., Zhang Q., Gu G., Wang Y., Luo G., Wei F., Hydrodynamics and gas mixing in a carbon nanotube agglomerate fluidized bed, A.I.Ch.E. Journal, 52 (2006) 4110–4123.10.1002/aic.11031 ↗
43. Zahi I., Mur P., Blaise Ph., Esteve A., Djafari Rouhani M., Vergnes H., Caussat B., Multi scale modelling of silicon nanocrystals synthesis by Low Pressure Chemical Vapour Deposition, Thin Solid Films, 519 (2011) 7650–7658.10.1016/j.tsf.2011.05.016 ↗
44. Zhu C., Yu Q., Dave R.N., Gas fluidization characteristics of nanoparticle agglomerates, A.I.Ch.E. Journal, 51 (2005) 426–437.10.1002/aic.10319 ↗