journal article·2017Open access

Nanocrystallization of Al Powder by Cryomilling Process

Mohammad Hossein Enayati

KONA Powder and Particle Journal· Volume 34· Issue 0

Abstract

Al5083 powder was subjected to ball milling in liquid nitrogen for 8 h using an attrition ball milling. The evolution of morphology of powder particles and the refinement of grain size were studied by scanning and transmission electron microscopies. The results showed that during cryomilling the morphology of powder particles changed from spherical to equiaxed shape. Additionally, the size of powder particles increased from ~10 m to ~20 m with narrower distribution. Simultaneously the cryomilling was associated with a significant reduction of grain size so that the final product after 8 h of cryomilling had a nanocrystalline microstructure (~25 nm) with well-developed high angle grain boundaries. These features were discussed in terms of severe plastic deformation, cold-welding and fracturing of powder particles which occur simultaneously during cryomilling process.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Microstructure and mechanical properties · Surface Treatment and Residual Stress

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Materials Engineering, Isfahan University of Technology, Iran

References (9)

Show source-provided references
1. Benghalem A., Morris D.G., Milling and mechanical alloying of copper and some solution alloys seen as a thermomechanical process, Acta Metallurgica et Materialia, 42 (1994) 4071–4081, Doi: 10.1016/0956-7151(94)90184-8.10.1016/0956-7151(94)90184-8 ↗
2. Cocco G., Soletta I., Battezzati L., Baricco M., Enzo S., Mechanical alloying of the Al–Ti system, Philosophical Magazine B, 61 (1990) 473–486, DOI: 10.1080/13642819008219288.10.1080/13642819008219288 ↗
3. Eckert J., Holzer J.C., Kril C.E., Johnson W.L., Structural and thermodynamic properties of nanocrystalline fcc metals prepared by mechanical attrition, Journal of Materials Research, 7 (1992) 1751–1761, DOI: 10.1557/JMR.1992.1751.10.1557/JMR.1992.1751 ↗
4. Enayati M.H., Formation of nanoscale layered structures and subsequent transformations during mechanical alloying of Ni60Nb40 powder mixture in a low energy ball mill, Kona Powder and Particle Journal, 32 (2015), 196–206, DOI: 10.14356/kona.2015010.10.14356/kona.2015010 ↗
5. Fogagnolo J.B., Robert M.H., Velasco F., Torralba J.M., Aluminium matrix composites reinforced with Si3N4, AlN and ZrB2, produced by conventional powder metallurgy and mechanical alloying, Kona Powder and Particle Journal, 22 (2004) 143–150, DOI: 10.14356/kona.2004017.10.14356/kona.2004017 ↗
6. Hellstern E., Fechet H.J., Fu Z., Johnson W.L., Structural and thermodynamic properties of heavily mechanically deformed Ru and AlRu, Journal of Applied Physics, 65 (1989) 305–310, DOI: 10.1063/1.342541.10.1063/1.342541 ↗
7. Koch C.C., Materials synthesis by mechanical alloying, Annual Review of Materials Science, 19 (1989)121–143, DOI: 10.1146/annurev.ms.19.080189.001005.10.1146/annurev.ms.19.080189.001005 ↗
8. Koch C.C., Synthesis of nanostructured materials by mechanical milling: problems and opportunities, Nanostructured Materials, 9 (1997) 13–22, Doi: 10.1016/S0965-9773(97)00014-7.10.1016/S0965-9773(97)00014-7 ↗
9. Zhou F., Lee J., Dallek S., Lavernia E.J., High grain size stability of nanocrystalline Al prepared by mechanical attrition, Journal of Materials Research, 16 (2001) 3451–3458, DOI: 10.1557/JMR.2001.0474.10.1557/JMR.2001.0474 ↗