journal article·2014Open access

Numerical Prediction of the Bulk Density of Granular Particles of Different Geometries

Kasra Samiei, Girma Berhe, Bernhard Peters

KONA Powder and Particle Journal· Volume 31· Issue 0

Abstract

The Discrete Element Method (DEM) is increasingly used to simulate the motion of granular material in engineering devices. The most widely used shape to model granular particles is the sphere due to its simplicity which facilitates computations. However, with increasing advancement and popularity of the DEM approach, a more accurate representation of real granular shapes is becoming intensely important. This paper is an attempt to predict the bulk density of granular particles of cylindrical shape by DEM. The method used to model tube-like particles is the composite method where the tube-like particle is composed of a number of spherical sub-shapes. The results show that the DEM prediction of the bulk density of tube-like particles were accurate provided that a sufficient number of spherical sub-shapes was used to construct the particle. In addition, the bulk density of granular particles in the shape of 32-face polyhedrons was also investigated. It was shown that 32-face polyhedrons can be approximated as spheres provided that the rolling resistance of the shape is taken into consideration.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Granular flow and fluidized beds · Soil Mechanics and Vehicle Dynamics · Geotechnical Engineering and Soil Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Research Group in Engineering Science, Faculty of Science, Technology and Communication, University of Luxembourg

References (48)

Show source-provided references
1. Allen M.P., Frenkel D., Talbot J., Molecular dynamics simulation using hard particles, Computer Physics Reports, 9 (1989) 301–353.10.1016/0167-7977(89)90009-9 ↗
2. Barr A.H., Superquadrics and angle-preserving transformations, IEEE Comput Graph Appl, 1 (1981) 11–23.10.1109/MCG.1981.1673799 ↗
3. Beardmore R., Coefficients of Friction, 2012, accessed: 27.08.2012.
4. Bennett J., Meepagala R., The Physics factbook, Coefficient of Restitution, 2006, accessed 27.08.2012.
5. Buchholtz V., Pöschel T., Numerical investigation of the evolution of sandpiles, Physica A (1994) 202–390.
6. Campbell C., Granular material flows-an overview, Powder Technology, 162 (2006) 208–229.10.1016/j.powtec.2005.12.008 ↗
7. Cleary P.W., Large scale industrial DEM modelling, Engineering Computations, 21 (2004) 169–204.10.1108/02644400410519730 ↗
8. Cleary P.W., Stokes N., Hurley J., Efficient collision detection for three dimensional super-ellipsoid particles, in: Proceedings of 8th international computational techniques and applications conference CTAC97, Adelaide, 1997.
9. Cundall P.A., Formulation of a 3-dimensional distinct element model. 1. a scheme to detect and represent contacts in a system composed of many polyhedral blocks, International Journal of Rock Mechanics and Mining Sciences & Geo-mechanics Abstracts, 25 (1988) 107–116.10.1016/0148-9062(88)92293-0 ↗
10. Engineer’s Handbook, Coefficient of Friction Reference Table, accessed 26.08.2012.
11. Engineering ToolBox, accessed 21.10.2012.
12. Fonner D.E., Banker G.S., Swarbrick J., Micromeritics of granular pharmaceutical solids i: Physical properties of particles prepared by five different granulation methods, Journal of Pharmaceutical Sciences, 55 (1966) 181–186.10.1002/jps.2600550211 ↗
13. Gallas J.A.C., Sokolowski S., Grain non-sphericity effects on the angle of repose of granular material, International Journal of Modern Physics B, 7 (1993) 2037–2046.10.1142/S0217979293002754 ↗
14. Gan M., Gopinathan N., Jia X., Williams R.A., Predicting packing characteristics of particles of arbitrary shapes, KONA Powder and Particle Journal, 22 (2004) 82–93.10.14356/kona.2004012 ↗
15. Goldstein H., Poole Jr. C.P., Safko J.L., Classical Mechanics, 3rd edition, Addison Wesley Publishing company, Cambridge, MA, 2001.10.1119/1.1484149 ↗
16. Hogue C., Newland D., Efficient computer-simulation of moving granular particles, Powder Technology, 78 (1994) 51–66.10.1016/0032-5910(93)02748-Y ↗
17. Hogue C., Shape representation and contact detection for discrete element simulations of arbitrary geometries, Engineering Computations 15 (1998) 374–390.10.1108/02644409810208525 ↗
18. Jia X., Gan M., Williams R.A., Rhodes D., Validation of a digital packing algorithm in predicting powder packing densities, Powder Technology, 174 (2007) 10–13.10.1016/j.powtec.2006.10.013 ↗
19. Jia X., Williams R.A., A packing algorithm for particles of arbitrary shapes, Powder Technology, 120 (2001) 175–186.10.1016/S0032-5910(01)00268-6 ↗
20. Johnson S., Williams J.R., Cook B., Contact resolution algorithm for an ellipsoid approximation for discrete element modelling, Engineering Computations, 21 (2004) 215–234.10.1108/02644400410519758 ↗
21. Kawaguchi T., Tanaka T., Tsuji Y., Numerical simulation of two-dimensional fluidized beds using the discrete element method (comparison between the two-and three-dimensional models), Powder Technology, 96 (1997) 129–138.10.1016/S0032-5910(97)03366-4 ↗
22. Ketterhagen W.R., Curtis J.S., Wassgren C.R., Kong A., Narayan P.J., Hancock B.C., Granular segregation in discharging cylindrical hoppers: A discrete element and experimental study, Chemical Engineering Science, 62 (2007) 6423–6439.10.1016/j.ces.2007.07.052 ↗
23. Ketterhagen W.R., Curtis J.S. and Wassgren C.R., Stress results from two-dimensional granular shear flow simulations using various collision models, Physical Review E, 71 (2005) 061307.10.1103/PhysRevE.71.061307 ↗
24. Kruggel-Emden H., Rickelt S., Wirtz S., Scherer V., A study on the validity of the multi-sphere discrete element method, Powder Technology, 188 (2008) 153–165.10.1016/j.powtec.2008.04.037 ↗
25. Kruggel-Emden H., Simsek E., Rickelt S., Wirtz S., Scherer V., Review and extension of normal force models for the discrete element method, Powder Technology, 171 (2007) 157–173.10.1016/j.powtec.2006.10.004 ↗
26. Latham J., Munjiza A., The modelling of particle systems with real shapes, Philosophical Transactions of the Royal Society of London, Series A: Mathematical Physical and Engineering Sciences, 362 (2004) 1953–1972.10.1098/rsta.2004.1425 ↗
27. Lin X., Ng T.T., A three-dimensional discrete element model using arrays of ellipsoids, Geotechnique, 47 (1997) 319–329.10.1680/geot.1997.47.2.319 ↗
28. Lin X., Ng T.T., Contact detection algorithms for three-dimensional ellipsoids in discrete element modelling, International Journal for Numerical and Analytical Methods in Geomechanics, 19 (1995) 653–659.10.1002/nag.1610190905 ↗
29. Lu M., McDowell G., The importance of modelling ballast particle shape in the discrete element method, Granular Matter, 9 (2007) 69–80.10.1007/s10035-006-0021-3 ↗
30. Maeno Y., Numerical investigation of surface level instability due to a tube in a vibrating bed of powder, Physica A, 232 (1996) 27–39.10.1016/0378-4371(96)00025-8 ↗
31. Munjiza A., The Combined Finite-Discrete Element Method, Wiley, 2004.10.1002/0470020180 ↗
32. Mutze U. Rigidly connected overlapping spherical particles: a versatile grain model, Granular Matter, 8 (2006) 185–194.10.1007/s10035-006-0011-5 ↗
33. Nolan G.T., Kavanagh P., Random packing of nonspherical particles, Powder Technology, 84 (1995) 199–205.10.1016/0032-5910(95)98237-S ↗
34. Ouadfel H., Rothenburg L., An algorithm for detecting inter-ellipsoid contacts, Computers and Geotechnics, 24 (1999) 245–263.10.1016/S0266-352X(99)00013-0 ↗
35. Pérez G., Numerical simulations in granular matter: The discharge of a 2d silo, PRAMANA - journal of physics, 70 (2008) 989–1007.10.1007/s12043-008-0104-2 ↗
36. Perram J.W., Wertheim M.S., Lebowitz J.L., Williams G.O., Monte Carlo simulations of hard spheroids, Chemical Physics Letters, 105 (1984) 277–280.10.1016/0009-2614(84)85029-0 ↗
37. Perram J.W., Wertheim M.S., Statistical mechanics of hard spheroids. i. overlap algorithm and the contact function, Journal of Computational Physics, 58 (1985) 409–416.10.1016/0021-9991(85)90171-8 ↗
38. Pöschel T. and Buchholtz V., Static friction phenomena in granular materials: Coulomb law versus particle geometry, Physical Review Letters, 71 (1993) 3963–3966.10.1103/PhysRevLett.71.3963 ↗
39. Pöschel T., Buchholtz V., Molecular dynamics of arbitrarily shaped granular particles, J. Phys. I France, 5 (1995) 1431–1455.10.1051/jp1:1995208 ↗
40. Pöschel T., Schwager T., Computational Granular Dynamics, Springer, Berlin, 2005.
41. Ridgway K., Rupp R., The effect of particle shape on powder properties, Journal of Pharmacy and Pharmacology, 21 (1969) 30S–39S.10.1111/j.2042-7158.1969.tb08344.x ↗
42. Riley G.S., Mann G.R., Effects of particle shape on angles of repose and bulk densities of a granular solid, Materials Research Bulletin, 7 (1972) 163–169.10.1016/0025-5408(72)90273-5 ↗
43. Ristow G.H., Granular dynamics: A review of recent molecular dynamics simulations of granular materials, Annual Reviews of Computational Physics I, (1994) 275–308.10.1142/9789812831682_0008 ↗
44. Silbert L.E., Ertas D., Grest G.S., Halsey T.C., Levine D., Plimpton S.J., Granular flow down an inclined plane: Bagnold scaling and rheology, Physical Review E, 64 (2001).10.1103/PhysRevE.64.051302 ↗
45. Tuley R., Danby M., Shrimpton J., Palmer M., On the optimal numerical time integration for lagrangian dem within implicit flow solvers, Computers and Chemical Engineering, 34 (2010) 886–899.10.1016/j.compchemeng.2009.10.003 ↗
46. Wang C.Y., Wang C.F., Sheng J., A packing generation scheme for the granular assemblies with 3d ellipsoidal particles, Int. J. Numer. Anal. Meth. Geomech., 23 (1999) 815–828.10.1002/(SICI)1096-9853(199907)23:8<815::AID-NAG15>3.0.CO;2-6 ↗
47. Wellmann C., Lillie C., Wriggers P., Homogenization of granular material modeled by a three-dimensional discrete element method, Computers and Geotechnics, 35 (2008) 394–405.10.1016/j.compgeo.2007.06.010 ↗
48. Zhao D.W., Nezami E.G., Hashash Y.M.A., Ghaboussi J., Three dimensional discrete element simulation for granular materials, Engineering Computations 23 (2006) 749–770.10.1108/02644400610689884 ↗