Flow of Non-Homogeneous Particulates in Rotating Drums
Source abstract
Abstract
Numerous industries deal with particulate systems such as the cement, ceramics, chemical, metallurgical and pharmaceutical industries. Usually the particulate systems handled in these industries are non-homogeneous, that is, their constituents are heterogeneous in their physical properties such as particle size, density, particle shape, and surface roughness. Handling of these systems during transport and/or manufacturing is usually associated with movements of these particulates at transfer points, being shaken, moving through drums, or sliding over inclined planes, which leads to the particulate mass being energized or disturbed. Disturbing such non-homogeneous systems results in mutual separation of the particulate constituents as a result of differences in their physical properties. The mutual separation is a natural phenomenon called segregation. In some instances, segregation is desired, while in most cases it is detrimental. Segregation in particulate systems takes place as a result of several forces, mainly frictional and gravitational forces, acting on the individual particles inside the system while it is energized. It is well known that the contributions of these forces in controlling the movement of particles are functions of the physical properties of the constituting components of the system. This paper concerns investigation and discussion of the mechanisms of particulate motion and the role of the forces acting during energizing a particulate system, particularly while moving through rotating drums, and their effects on the quality of the final products of non-homogeneous particulate systems.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Granular flow and fluidized beds · Soil Mechanics and Vehicle Dynamics · Agricultural Engineering and Mechanization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Dept. Mining, Faculty of Engineering, Cairo University
Dept. Materials Science and Engineering, University of California
References (38)
Show source-provided references
1. 1) Hogg, R., Shoji, K., and Austin, L.G., (1974): Powder Technology, vol. 9, pp. 99–106.10.1016/0032-5910(74)85013-8 ↗
2. 2) Austin, L.G., Luckie, P.T. and Ateya, B.G., (1971): Cement and Concrete Research, vol. 1, pp. 241–248.10.1016/0008-8846(71)90001-9 ↗
3. 3) Karra, V.K. and Fuerstenau, D.W., (1977): International Journal of Mineral Processing, vol. 4, pp. 1–9.10.1016/0301-7516(77)90027-8 ↗
4. 4) Boating, A.A., (2008): Rotary kilns, Butter worth Heinemann, Pub., 368 p.
5. 5) Sheehan, M.E,; Britton, P.F. and Schneider, P.A., (2005): Chemical Engineering Science, Vol. 60, No. 15, pp. 4171–4182.10.1016/j.ces.2005.02.055 ↗
6. 6) Li, S.Q.; Chi, Y.; Li, I.-D; Yan, J. -H; Cen, K.-F., (2002): Powder Technology, Vol. 126, No. 3, pp. 228–240.10.1016/S0032-5910(02)00015-3 ↗
7. 7) Li, H., (2005): Impact of cohesion forces on particle mixing and segregation Ph.D. dissertation, University of Pittsburg.
8. 8) Hogg, R. and Fuerstenau, D.W., (1972): Powder Technology, vol. 6, No. 3, pp. 139–148.10.1016/0032-5910(72)80070-6 ↗
9. 9) Santomaso, A.; Olivi, M.; Canu, P., (2004): Chemical Engineering Science, Vol. 59, No. 16, pp. 3269–3280.10.1016/j.ces.2004.04.026 ↗
10. 10) Hogg, R., (2009): KONA Powder and Particle Journal No. 27, pp.3–17.10.14356/kona.2009005 ↗
11. 11) Hogg, R., Cahn, D.S. Healy, T.W. and Fuerstenau, D.W., (1966), Chemical Engineering Science, vol. 21, pp. 1025–1037.10.1016/0009-2509(66)85098-4 ↗
12. 12) Hogg, R., (1971): Bulletin of College of Earth Sciences, Penn State University, vol. 40, No. 6, pp. 41–44.
13. 13) Santomaso, A.; Olivi, M.; Canu, P., (2005): Powder Technology, Vol. 152, No. 1–3, pp. 41–51.10.1016/j.powtec.2005.01.011 ↗
14. 14) Shinbrot, T.; Zeggio, M.; Muzzio, F.J., (2001): Powder Technology, Vol. 116, No. 2–3, pp. 224–231.10.1016/S0032-5910(00)00394-6 ↗
15. 15) Wegrzyn, M., (2004): Electronic Journal of Polish Agricultural Universities, vol. 7, No.2, 10 p.
16. 16) Ingram, A., Seville, J.P K., Parker, D.J., Fan, X. and Forster, R.G., (2005), Powder Technology, vol. 158, No. 1–3, pp. 76–91.10.1016/j.powtec.2005.04.030 ↗
17. 17) Williams, J. C., (1968/1969): Powder Technology, vol. 2, pp. 13–20.10.1016/0032-5910(68)80028-2 ↗
18. 19) Eskin, D. and Kalman, H., (2000): Chemical Engineering and Processing, vol. 39, No. 6, pp. 539–545.10.1016/S0255-2701(00)00100-8 ↗
19. 20) van Puyveld, D.R.; Young, B. R.; Wison, M.A.; Shmidt, S.J., (2000): Chemical Engineering Research and Design, Vol. 78, No. 4, pp. 643–650.10.1205/026387600527590 ↗
20. 21) Ding, Y.L.; Forster, R.N. Seville, J.P.K.; Parker, D.J., (2001): Chemical Engineering Science, Vol. 56, No. 12, pp. 3737–3750.10.1016/S0009-2509(01)00092-6 ↗
21. 22) Himmellblau, D.M., and Bischoff, K.B., (1968): Process Analysis and Simulation, Willey, New York.
22. 23) Abouzeid, A.-Z. M. and D.W. Fuerstenau, D.W., (1982): J. Egyptian Society of Engineers, vol. 21, No. 3, pp. 52–60.
23. 24) Abouzeid, A.-Z. M., (1989): Powder Handling and Processing, vol. 1, No. 2, pp. 173–177.
24. 25) Swaroop, S.H.R.; Abouzeid, A.-Z. M., Fuerestenau, D. W., (1981): Powder Technology, Vol. 5, No. 5, pp. 253–260.10.1016/0032-5910(81)87051-9 ↗
25. 26) Boaleng, A.A., (2008): Rotary Kilns, Elsevier publisher, pp. 15–31.10.1016/B978-075067877-3.50004-0 ↗
26. 27) Felix, G., Falk, V., and D’Ortona, U., (2002): Powder Technology, vol. 128, pp. 314–319.10.1016/S0032-5910(02)00171-7 ↗
27. 28) Wes, G.W.J., Drinkenburg, A.A.H., and Stemerding, S., (1976): Powder Tecnology, vol. 13, No. 2, pp. 177–184.10.1016/0032-5910(76)85002-4 ↗
28. 29) Abouzeid, A.-Z. M., Mika, T.S., Sastry, K.V.S., Fuerstenau, D.W., (1974): Powder Technology, vol. 10, pp. 273–285.10.1016/0032-5910(74)85002-3 ↗
29. 30) Abouzeid, A.-Z. M., (1973): Transport and mixing behavior of particulate solids through rotary drums, Ph.D. dissertation, University of California, Berkeley, California.
30. 31) Abouzeid, A.-Z. M. and Fuerstenau, D.W., (1985): Powder and Bulk Solids Handling and Processing; Proceedings, Powder Advisory Center, London, pp. 711–721.
31. 32) Venkataraman, K.S. and Fuerstenau, D.W., (1985): Powder and Bulk Solids Handling and Processing; Proceedings, Powder Advisory Center, London, pp. 704–710.
32. 33) Abouzeid, A.-Z. M. and Fuerstenau, D.W., (1979): Powder Technology, vol. 23, pp. 261–269.10.1016/0032-5910(79)87016-3 ↗
33. 34) Sugimoto, M., (1981): Proceedings, International Symposium on Powder Technology, Japan, pp. 726–735.
34. 35) Nakagawa, M., Furuuchi, M., Yamahata, M., and Gotoh, K., (1985): Powder Technology, vol. 44, pp. 195–203.10.1016/0032-5910(85)87026-1 ↗
35. 36) Shinohara, K., (1986), Powder Technology, vol. 48, pp. 151–160.10.1016/0032-5910(86)80074-2 ↗
36. 37) Furuuchi, M., and Nagakawa, M., Suzuki, M. Tsyumine, H., and Gotoh, K., (1978): Powder Technology, vol. 50, pp. 137–146.10.1016/0032-5910(87)80051-7 ↗
37. 38) Furuuchi, M., and Gotoh, K., (1988): Powder Tecnology, vol. 54, pp. 31–40.10.1016/0032-5910(88)80046-9 ↗
38. 39) Abouzeid, A.-Z. M. and Fuerstenau, D.W., (1972): I & EC Process Design & Development, vol.11, pp.296–301.10.1021/i260042a025 ↗