journal article·2018Open access

Separation Characteristics of a Deflector Wheel Classifier in Stationary Conditions and at High Loadings: New Insights by Flow Visualization

Christian Spötter, Kurt Legenhausen, Alfred P. Weber

KONA Powder and Particle Journal· Volume 35· Issue 0

Abstract

Although the deflector wheel classifier is the dominant separation device in the industrial separation of finegrained particle fractions, the classifying mechanisms at high particle loadings are still not described and understood sufficiently. The existing models for the calculation of the separation efficiency, which are mostly based on a single particle's fate, fail to capture the behavior at high particle loading where particle-particle and particle-wall collisions are encountered. To overcome this knowledge gap, a high-speed camera was used to analyze the particle movement in the separation process of a deflector wheel classifier representing real physical conditions. It is shown that particle-particle and particle-wall collisions must be included in a consistent theoretical model to represent the effective particle behavior in the separation process. In addition, the influence of process parameters such as revolution rate and mass loading on the separation efficiency of a deflector wheel classifier at high loadings is presented here.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Mineral Processing and Grinding · Cyclone Separators and Fluid Dynamics · Granular flow and fluidized beds

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Institute for Particle Technology, Clausthal University of Technology, Germany

Funding

Deutsche Forschungsgemeinschaft

References (20)

Show source-provided references
1. Bauer U., Zur trennscharfen Feinstsichtung in Fliehkraft-Abweiseradsichtern, Dissertation, TU Clausthal (2002).
2. Eswaraiah C. and Narayanan S.S., Studies on a rotating wheel air classifier for size classification of fly ash, Mineral process technology, Trichy India (2005) 465–472.
3. Füchsel S., Trockene Desagglomeration von Nanopartike-lflocken in einer Gegenstrahlmühle mit kombinierter Onlineüberwachung, Dissertation, Clausthal (2012).
4. Galk J., Feinsttrennung in Abweiseradsichtern, Dissertation, TU Clausthal (1995).
5. Husemann K., Modelling of Dry Countercurrent Classification, Aufbereitungs-Technik 39, Freiberg (1998) 279–286.
6. Legenhausen K., Untersuchung der Strömungsverhältnisse in einem Abweiseradsichter, Dissertation, TU Clausthal (1991).
7. Leschonski K., Windsichter, verfahrenstechnische Maschinen zur Herstellung definierter pulverförmiger Produkte, Jahrbuch 1988 der Braunschweigischen Wissenschaftlichen Gesellschaft, Braunschweig (1988).
8. Leschonski K., Classification of particles in the submicron range in an impeller wheel air classifier, KONA Powder and Particle Journal, 14 (1996) 52–60.10.14356/kona.1996010 ↗
9. Molerus O., Stochastisches modell der gleichgewichtssichtung, Chemie Ingenieur Technik, 39 (1967) 792–796.10.1002/cite.330391304 ↗
10. Molerus O., Hoffmann H., Darstellung von windsichtertrennkurven durch ein stochastisches modell, Chemie Ingenieur Technik, 41 (1969) 340–344.10.1002/cite.330410523 ↗
11. Richardson J.F., Zaki W.N., The sedimentation of a suspension of uniform spheres under conditions of viscous flow, Chemical Engineering Science, 3 (1954) 65–73.10.1016/0009-2509(54)85015-9 ↗
12. Rumpf H. and Raasch J., Desagglomeration in Strömungen, Karlsruhe (1962).
13. Rumpf H., Leschonski K., Prinzipien und neuere Verfahren der Windsichtung, Chemie Ingenieur Technik, 39 (1967) 1231–1241.10.1002/cite.330392105 ↗
14. Rumpf H., Sommer K. and Stieß M., Berechnung von Trennkurven für Gleichgewichtsichter, Verfahrenstechnik (8), Karlsruhe (1974).
15. Schubert H., Aufbereitung fester mineralscher Rohstoffe—Band 1, Leipzig (1968).
16. Stender M., Legenhausen K. und Weber A.P., Visualisierung der Partikelbewegung in einem Abweiseradsichter, Chemie Ingenieur Technik, 87 (2015) 1392–1401..10.1002/cite.201400149 ↗
17. Stieß M., Mechanische Vefahrenstechnik—Partikeltech-nologie 1, Springerverlag Konstanz (2009).
18. Spötter C., Stender M., Legenhausen K. und Weber A.P., Dynamische Trenncharakteristik von Abweiseradsichtern, Produktgestaltung in der Partikeltechnologie Band 7, Faunhofer Verlag (2015).
19. Toneva P., Epple P., Breuer M., Peukert W., Wirth K.-E., Grinding in an air classifier mill Part I: Characterisation of the one-phase flow, Powder Technology, 211 (2011) 19–27.10.1016/j.powtec.2011.03.009 ↗
20. Toneva P., Wirth K.-E., Peukert W., Grinding in an air classifier mill—Part II: Characterisation of the two-phase flow, Powder Technology, 211 (2011) 28–37.10.1016/j.powtec.2011.03.010 ↗