Current Progress of Experimental and Simulation Work of Mixing Processes in Particulate Systems
Source abstract
Abstract
Particle mixing is a fundamental process used in various industries to handle powders, granules, and pellets. Understanding particle mixing is critical for optimizing industrial processes involving particulate systems, making it an important scientific and practical consideration. In this review, the current research progress of experimental and simulation works for widely used tumbler and convective mixers is reviewed, and research gaps are summarized for future investigations. Finally, some new development points of modern particle mixing technologies and topics are mentioned. This paper provides a comprehensive review of the research work of mixers in particulate systems and sheds light on future research in the field of particle mixing.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Granular flow and fluidized beds · Mineral Processing and Grinding · Cyclone Separators and Fluid Dynamics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Chemical Engineering, University of New South Wales, Australia
Funding
Australian Research Council
References (82)
Show source-provided references
1. Alexander A., Shinbrot T., Johnson B., Muzzio F.J., V-blender segregation patterns for free-flowing materials: effects of blender capacity and fill level, International Journal of Pharmaceutics, 269 (2004) 19–28. DOI:10.1016/S0378-5173(03)00296-510.1016/S0378-5173(03)00296-5 ↗
2. Arratia P., Duong N.-h., Muzzio F., Godbole P., Reynolds S., A study of the mixing and segregation mechanisms in the Bohle Tote blender via DEM simulations, Powder Technology, 164 (2006) 50–57. DOI:10.1016/j.powtec.2006.01.01810.1016/j.powtec.2006.01.018 ↗
3. Basinskas G., Sakai M., Numerical study of the mixing efficiency of a ribbon mixer using the discrete element method, Powder Technology, 287 (2016) 380–394. DOI:10.1016/j.powtec.2015.10.01710.1016/j.powtec.2015.10.017 ↗
4. Berntsson O., Danielsson L.-G., Lagerholm B., Folestad S., Quantitative in-line monitoring of powder blending by near infrared reflection spectroscopy, Powder Technology, 123 (2002) 185–193. DOI:10.1016/S0032-5910(01)00456-910.1016/S0032-5910(01)00456-9 ↗
5. Bowler A.L., Bakalis S., Watson N.J., A review of in-line and on-line measurement techniques to monitor industrial mixing processes, Chemical Engineering Research & Design, 153 (2020) 463–495. DOI:10.1016/j.cherd.2019.10.04510.1016/j.cherd.2019.10.045 ↗
6. Brandao R.J., Lima R.M., Santos R.L., Duarte C.R., Barrozo M.A., Experimental study and DEM analysis of granular segregation in a rotating drum, Powder Technology, 364 (2020) 1–12. DOI:10.1016/j.powtec.2020.01.03610.1016/j.powtec.2020.01.036 ↗
7. Bridgwater J., Mixing of powders and granular materials by mechanical means—A perspective, Particuology, 10 (2012) 397–427. DOI:10.1016/j.partic.2012.06.00210.1016/j.partic.2012.06.002 ↗
8. Brone D., Alexander A., Muzzio F., Quantitative characterization of mixing of dry powders in V-blenders, AIChE journal, 44 (1998) 271–278. DOI:10.1002/aic.69044020610.1002/aic.690440206 ↗
9. Brone D., Muzzio F., Enhanced mixing in double-cone blenders, Powder Technology, 110 (2000) 179–189. DOI:10.1016/S0032-5910(99)00204-110.1016/S0032-5910(99)00204-1 ↗
10. Chandratilleke G., Jin X., Shen Y., DEM study of effects of particle size and density on mixing behavior in a ribbon mixer, Powder Technology, 392 (2021) 93–107. DOI:10.1016/j.powtec.2021.06.05810.1016/j.powtec.2021.06.058 ↗
11. Chen Q., Yang H., Li R., Xiu W., Zheng G., Kong P., Rearrangement of irregular sand particles in a rotary drum after avalanche flow, Powder Technology, 360 (2020) 549–554. DOI:10.1016/j.powtec.2019.10.08310.1016/j.powtec.2019.10.083 ↗
12. Cho J., Zhu Y., Lewkowicz K., Lee S., Bergman T., Chaudhuri B., Solving granular segregation problems using a biaxial rotary mixer, Chemical Engineering and Processing: Process Intensification, 57 (2012) 42–50. DOI:10.1016/j.cep.2012.04.00210.1016/j.cep.2012.04.002 ↗
13. Chung Y.-C., Liao C.-C., Zhuang Z.-H., Experimental investigations for the effect of fine powders on size-induced segregation in binary granular mixtures, Powder Technology, 387 (2021) 270–276. DOI:10.1016/j.powtec.2021.04.03410.1016/j.powtec.2021.04.034 ↗
14. Crouter A., Briens L., Passive acoustic emissions from particulates in a V-blender, Drug Development and Industrial Pharmacy, 41 (2015) 1809–1818. DOI:10.3109/03639045.2015.100991310.3109/03639045.2015.1009913 ↗
15. Cullen P., Bakalis S., Sullivan C., Advances in control of food mixing operations, Current Opinion in Food Science, 17 (2017) 89–93. DOI:10.1016/j.cofs.2017.11.00210.1016/j.cofs.2017.11.002 ↗
16. Deng S., Wen Z., Su F., Wang Z., Lou G., Liu X., Dou R., Radial mixing of metallurgical slag particles and steel balls in a horizontally rotating drum: a discussion of particle size distribution and mixing time, Powder Technology, 378 (2021) 441–454. DOI:10.1016/j.powtec.2020.10.02210.1016/j.powtec.2020.10.022 ↗
17. Ding Y., Seville J., Forster R., Parker D., Solids motion in rolling mode rotating drums operated at low to medium rotational speeds, Chemical Engineering Science, 56 (2001) 1769–1780. DOI:10.1016/S0009-2509(00)00468-110.1016/S0009-2509(00)00468-1 ↗
18. Duran J., Sands, Powders, And Grains: An Introduction to the Physics of Granular Materials, Springer New York, 2012, ISBN: 978-1461204992. DOI:10.1007/978-1-4612-0499-210.1007/978-1-4612-0499-2 ↗
19. Ebrahimi M., Yaraghi A., Ein-Mozaffari F., Lohi A., The effect of impeller configurations on particle mixing in an agitated paddle mixer, Powder Technology, 332 (2018) 158–170. DOI:10.1016/j.powtec.2018.03.06110.1016/j.powtec.2018.03.061 ↗
20. Ebrahimi M., Yaraghi A., Jadidi B., Ein-Mozaffari F., Lohi A., Assessment of bi-disperse solid particles mixing in a horizontal paddle mixer through experiments and DEM, Powder Technology, 381 (2021) 129–140. DOI:10.1016/j.powtec.2020.11.04110.1016/j.powtec.2020.11.041 ↗
21. Forterre Y., Pouliquen O., Flows of dense granular media, Annual Review of Fluid Mechanics, 40 (2008) 1–24. DOI:10.1146/annurev.fluid.40.111406.10214210.1146/annurev.fluid.40.111406.102142 ↗
22. Gao W., Liu L., Liao Z., Chen S., Zang M., Tan Y., Discrete element analysis of the particle mixing performance in a ribbon mixer with a double U-shaped vessel, Granular Matter, 21 (2019) 12. DOI:10.1007/s10035-018-0864-410.1007/s10035-018-0864-4 ↗
23. Ghadiri M., Pasha M., Nan W., Hare C., Vivacqua V., Zafar U., Nezamabadi S., Lopez A., Pasha M., Nadimi S., Cohesive powder flow: trends and challenges in characterisation and analysis, KONA Powder and Particle Journal, 37 (2020) 3–18. DOI:10.14356/kona.202001810.14356/kona.2020018 ↗
24. Gijón-Arreortúa I., Tecante A., Mixing time and power consumption during blending of cohesive food powders with a horizontal helical double-ribbon impeller, Journal of Food Engineering, 149 (2015) 144–152. DOI:10.1016/j.jfoodeng.2014.10.01310.1016/j.jfoodeng.2014.10.013 ↗
25. Halidan M., Chandratilleke G.R., Dong K., Yu A., The effect of interparticle cohesion on powder mixing in a ribbon mixer, AIChE Journal, 62 (2016) 1023–1037. DOI:10.1002/aic.1510110.1002/aic.15101 ↗
26. Halidan M., Chandratilleke G.R., Dong K., Yu A., Mixing performance of ribbon mixers: effects of operational parameters, Powder Technology, 325 (2018) 92–106. DOI:10.1016/j.powtec.2017.11.00910.1016/j.powtec.2017.11.009 ↗
27. Horváth D., Poós T., Tamás K., Modeling the movement of hulled millet in agitated drum dryer with discrete element method, Computers, Electronics in Agriculture, 162 (2019) 254–268. DOI:10.1016/j.ces.2021.11649110.1016/j.ces.2021.116491 ↗
28. Huang A., Cheng T., Hsu W., Huang C., Kuo H., DEM study of particle segregation in a rotating drum with internal diameter variations, Powder Technology, 378 (2021a) 430–440. DOI:10.1016/j.powtec.2020.10.01910.1016/j.powtec.2020.10.019 ↗
29. Huang A., Wang X., Hsu W., Kuo H., Particle segregation in a rotating drum with inner segmentation ring pair, Powder Technology, 394 (2021b) 891–900. DOI:10.1016/j.powtec.2021.09.01510.1016/j.powtec.2021.09.015 ↗
30. Huang P., Miao Q., Ding Y., Sang G., Jia M., Research on surface segregation and overall segregation of particles in a rotating drum based on stacked image, Powder Technology, 382 (2021) 162–172. DOI:10.1016/j.powtec.2020.12.06310.1016/j.powtec.2020.12.063 ↗
31. Jadidi B., Ebrahimi M., Ein-Mozaffari F., Lohi A., Mixing performance analysis of non-cohesive particles in a double paddle blender using DEM and experiments, Powder Technology, 397 (2022) 117122. DOI:10.1016/j.powtec.2022.11712210.1016/j.powtec.2022.117122 ↗
32. Jiang S., Long X., Ye Y., Liu J., Yang S., Xiao X., Liu S., Experimental research on the motion behavior of particles in a rotating drum based on similarity, Powder Technology, (2021) 117046. DOI:10.1016/j.powtec.2021.11704610.1016/j.powtec.2021.117046 ↗
33. Jin X., DEM study on the mixing behavior of U-shaped ribbon mixers, doctoral thesis, UNSW Sydney, 2022. DOI:10.26190/unsworks/24134
34. Kato Y., Kushimoto K., Ishihara S., Kano J., Development of a method for estimating particles mixing curves in short DEM simulation time, Advanced Powder Technology, 33 (2022) 103841. DOI:10.1016/j.apt.2022.10384110.1016/j.apt.2022.103841 ↗
35. Kumar S., Khatoon S., Yogi J., Verma S.K., Anand A., Experimental investigation of segregation in a rotating drum with non-spherical particles, Powder Technology, 411 (2022) 117918. DOI:10.1016/j.powtec.2022.11791810.1016/j.powtec.2022.117918 ↗
36. Kuo H., Knight P., Parker D., Seville J., Solids circulation and axial dispersion of cohesionless particles in a V-mixer, Powder Technology, 152 (2005) 133–140. DOI:10.1016/j.powtec.2004.12.00310.1016/j.powtec.2004.12.003 ↗
37. Kuo H.-P., Tseng W.-T., Huang A.-N., Controlling of segregation in rotating drums by independent end wall rotations, KONA Powder and Particle Journal, 33 (2016) 239–248. DOI:10.14356/kona.201600410.14356/kona.2016004 ↗
38. Lemieux M., Léonard G., Doucet J., Leclaire L.-A., Viens F., Chaouki J., Bertrand F., Large-scale numerical investigation of solids mixing in a V-blender using the discrete element method, Powder Technology, 181 (2008) 205–216. DOI:10.1016/j.powtec.2006.12.00910.1016/j.powtec.2006.12.009 ↗
39. Li D., Xu X., Chen J., Yang K., Liu X., Yang L., Numerical study on the effect of drum on the flow behavior of binary-size particles in rotating drums, Powder Technology, 386 (2021) 108–119. DOI:10.1016/j.powtec.2021.03.01310.1016/j.powtec.2021.03.013 ↗
40. Li M., Wu Y., Qian Y., An X., Li H., DEM simulation on mixing characteristics and macroscopic/microscopic flow behaviors of different-shaped sphero-cylinders in a rotating drum, Industrial & Engineering Chemistry Research, 60 (2021) 8874–8887. DOI:10.1021/acs.iecr.1c0096210.1021/acs.iecr.1c00962 ↗
41. Li R., Xiu W., Liu B., Zheng G., Yang H., Velocity distribution of rice particles in a rotating drum, Powder Technology, 386 (2021) 394–398. DOI:10.1016/j.powtec.2021.03.05010.1016/j.powtec.2021.03.050 ↗
42. Liao C.-C., Huang Y.-Y., Experimental investigate the effect of liquid distribution state on size segregation of wet granular materials in rotating drums, Powder Technology, 381 (2021) 561–566. DOI:10.1016/j.powtec.2020.12.03210.1016/j.powtec.2020.12.032 ↗
43. Liao C.-C., Ou S.-F., Chen S.-L., Chen Y.-R., Influences of fine powder on dynamic properties and density segregation in a rotating drum, Advanced Powder Technology, 31 (2020) 1702–1707. DOI:10.1016/j.apt.2020.02.00610.1016/j.apt.2020.02.006 ↗
44. Liao C.-C., Tsai C.-C., Behavior of density-induced segregation with multi-density granular materials in a thin rotating drum, Granular Matter, 22 (2020) 65. DOI:10.1007/s10035-020-01034-w10.1007/s10035-020-01034-w ↗
45. Liu B., Wang Q., Zhou Z., Zou R., Influence of baffles on mixing and heat transfer characteristics in an internally heated rotating drum, Powder Technology, 398 (2022) 117129. DOI:10.1016/j.powtec.2022.11712910.1016/j.powtec.2022.117129 ↗
46. Ma H., Zhao Y., Modelling of the flow of ellipsoidal particles in a horizontal rotating drum based on DEM simulation, Chemical Engineering Science, 172 (2017) 636–651. DOI:10.1016/j.ces.2017.07.01710.1016/j.ces.2017.07.017 ↗
47. Marigo M., Stitt E.H., Discrete element method (DEM) for industrial applications: comments on calibration and validation for the modelling of cylindrical pellets, KONA Powder and Particle Journal, 32 (2015) 236–252. DOI:10.14356/kona.201501610.14356/kona.2015016 ↗
48. MArczuk A., Caban J., Savinykh P., Turubanov N., Zyryanov D., Maintenance research of a horizontal ribbon mixer, Eksploatacja i Niezawodność, 19 (2017) 121–125. DOI:10.17531/ein.2017.1.1710.17531/ein.2017.1.17 ↗
49. Miao Q., Huang P., Ding Y., Guo J., Jia M., Particle mixing and segregation behaviors in the rotating drums with adjacent axial segmentations in different speed directions, Powder Technology, (2022) 117534. DOI:10.1016/j.powtec.2022.11753410.1016/j.powtec.2022.117534 ↗
50. Mori Y., Sakai M., Advanced DEM simulation on powder mixing for ellipsoidal particles in an industrial mixer, Chemical Engineering Journal, 429 (2022) 132415. DOI:10.1016/j.cej.2021.13241510.1016/j.cej.2021.132415 ↗
51. Musha H., Dong K., Chandratilleke G.R., Bridgwater J., Yu A., Mixing behavior of cohesive and non-cohesive particle mixtures in a ribbon mixer, AIP Conference Proceedings, 1542 (2013) 731–734. DOI:10.1063/1.481203510.1063/1.4812035 ↗
52. Muzzio F.J., Llusa M., Goodridge C.L., Duong N.-H., Shen E., Evaluating the mixing performance of a ribbon blender, Powder Technology, 186 (2008) 247–254. DOI:10.1016/j.powtec.2007.12.01310.1016/j.powtec.2007.12.013 ↗
53. Nijssen T.M., van Dijk M.A., Kuipers H.A., van der Stel J., Adema A.T., Buist K.A., Experiments on floating bed rotating drums using magnetic particle tracking, AIChE journal, 68 (2022) e17627. DOI:10.1002/aic.1762710.1002/aic.17627 ↗
54. Ottino J., Khakhar D., Mixing and segregation of granular materials, Annual Review of Fluid Mechanics, 32 (2000) 55–91. DOI:10.1146/annurev.fluid.32.1.5510.1146/annurev.fluid.32.1.55 ↗
55. Page M.J., Lourenço A.L., David T., LeBeau A.M., Cattaruzza F., Castro H.C., VanBrocklin H.F., Coughlin S.R., Craik C.S., Non-invasive imaging and cellular tracking of pulmonary emboli by near-infrared fluorescence and positron-emission tomography, Nature Communications, 6 (2015) 8448. DOI:10.1038/ncomms944810.1038/ncomms9448 ↗
56. Pasha M., Hassanpour A., Ahmadian H., Tan H., Bayly A., Ghadiri M., A comparative analysis of particle tracking in a mixer by discrete element method and positron emission particle tracking, Powder Technology, 270 (2015) 569–574. DOI:10.1016/j.powtec.2014.09.00710.1016/j.powtec.2014.09.007 ↗
57. Rahmanian N., Ng B., Hassanpour A., Ding Y., Antony J., Jia X., Ghadiri M., van der Wel P., Krug-Polman A., York D., Bayly A., Tan H.S., Scale-up of high-shear mixer granulators, KONA Powder and Particle Journal, 26 (2008) 190–204. DOI:10.14356/kona.200801710.14356/kona.2008017 ↗
58. Ren X., Xu J., Qi H., Cui L., Ge W., Li J., GPU-based discrete element simulation on a tote blender for performance improvement, Powder Technology, 239 (2013) 348–357. DOI:10.1016/j.powtec.2013.02.01910.1016/j.powtec.2013.02.019 ↗
59. Rong W., Feng Y., Schwarz P., Yurata T., Witt P., Li B., Song T., Zhou J., Sensitivity analysis of particle contact parameters for DEM simulation in a rotating drum using response surface methodology, Powder Technology, 362 (2020) 604–614. DOI:10.1016/j.powtec.2019.12.00410.1016/j.powtec.2019.12.004 ↗
60. Sakai M., How should the discrete element method be applied in industrial systems?: a review, KONA Powder and Particle Journal, 33 (2016) 169–178. DOI:10.14356/kona.201602310.14356/kona.2016023 ↗
61. Sakai M., Mori Y., Sun X., Takabatake K., Recent progress on mesh-free particle methods for simulations of multi-phase flows: a review, KONA Powder and Particle Journal, 37 (2020) 132–144. DOI:10.14356/kona.202001710.14356/kona.2020017 ↗
62. Santomaso A., Olivi M., Canu P., Mechanisms of mixing of granular materials in drum mixers under rolling regime, Chemical Engineering Science, 59 (2004) 3269–3280. DOI:10.1016/j.ces.2004.04.02610.1016/j.ces.2004.04.026 ↗
63. Sarkar A., Wassgren C.R., Effect of particle size on flow and mixing in a bladed granular mixer, AIChE journal, 61 (2015) 46–57. DOI:10.1002/aic.1462910.1002/aic.14629 ↗
64. Shenoy P., Viau M., Tammel K., Innings F., Fitzpatrick J., Ahrné L., Effect of powder densities, particle size and shape on mixture quality of binary food powder mixtures, Powder Technology, 272 (2015) 165–172. DOI:10.1016/j.powtec.2014.11.02310.1016/j.powtec.2014.11.023 ↗
65. Silveira J.C., Lima R.M., Brandao R.J., Duarte C.R., Barrozo M.A., A study of the design and arrangement of flights in a rotary drum, Powder Technology, 395 (2022) 195–206. DOI:10.1016/j.powtec.2021.09.04310.1016/j.powtec.2021.09.043 ↗
66. Tahvildarian P., Ein-Mozaffari F., Upreti S.R., Circulation intensity and axial dispersion of non-cohesive solid particles in a V-blender via DEM simulation, Particuology, 11 (2013) 619–626. DOI:10.1016/j.partic.2012.12.01010.1016/j.partic.2012.12.010 ↗
67. Tanabe S., Gopireddy S.R., Minami H., Ando S., Urbanetz N.A., Scherließ R., Influence of particle size and blender size on blending performance of bi-component granular mixing: a DEM and experimental study, European Journal of Pharmaceutical Sciences, 134 (2019) 205–218. DOI:10.1016/j.ejps.2019.04.02410.1016/j.ejps.2019.04.024 ↗
68. Tsugeno Y., Sakai M., Yamazaki S., Nishinomiya T., DEM simulation for optimal design of powder mixing in a ribbon mixer, Advanced Powder Technology, 32 (2021) 1735–1749. DOI:10.1016/j.apt.2021.03.02610.1016/j.apt.2021.03.026 ↗
69. Volpato S., Scanferla L., Santomaso A., Experimental and computational investigation of segregation during tumblers unloading, Powder Technology, 338 (2018) 538–547. DOI:10.1016/j.powtec.2018.07.06610.1016/j.powtec.2018.07.066 ↗
70. Wang S., Zhou Z., Ji S., Radial segregation of a gaussian-dispersed mixture of superquadric particles in a horizontal rotating drum, Powder Technology, 394 (2021) 813–824. DOI:10.1016/j.powtec.2021.09.01210.1016/j.powtec.2021.09.012 ↗
71. Wu W., Chen K., Tsotsas E., Prediction of particle mixing time in a rotary drum by 2D DEM simulations and cross-correlation, Advanced Powder Technology, 33 (2022) 103512. DOI:10.1016/j.apt.2022.10351210.1016/j.apt.2022.103512 ↗
72. Xiao X., Li Y., Peng R., Gao J., Hu C., Parameter calibration and mixing uniformity of irregular gravel materials in a rotating drum, Powder Technology, 414 (2023) 118074. DOI:10.1016/j.powtec.2022.11807410.1016/j.powtec.2022.118074 ↗
73. Xu G., Zhang Y., Yang X., Chen G., Jin B., Effect of drum structure on particle mixing behavior based on DEM method, Particuology, 74 (2023) 74–91. DOI:10.1016/j.partic.2022.05.00810.1016/j.partic.2022.05.008 ↗
74. Yamamoto M., Ishihara S., Kano J., Evaluation of particle density effect for mixing behavior in a rotating drum mixer by DEM simulation, Advanced Powder Technology, 27 (2016) 864–870. DOI:10.1016/j.apt.2015.12.01310.1016/j.apt.2015.12.013 ↗
75. Yang S., Cahyadi A., Wang J., Chew J.W., DEM study of granular flow characteristics in the active and passive regions of a three-dimensional rotating drum, AIChE journal, 62 (2016) 3874–3888. DOI:10.1002/aic.1531510.1002/aic.15315 ↗
76. Yaraghi A., Ebrahimi M., Ein-Mozaffari F., Lohi A., Mixing assessment of non-cohesive particles in a paddle mixer through experiments and discrete element method (DEM), Advanced Powder Technology, 29 (2018) 2693–2706. DOI:10.1016/j.apt.2018.07.01910.1016/j.apt.2018.07.019 ↗
77. Yazdani E., Hashemabadi S.H., The influence of cohesiveness on particulate bed segregation and mixing in rotating drum using DEM, Physica A: Statistical Mechanics its Applications, 525 (2019) 788–797. DOI:10.1016/j.physa.2019.03.12710.1016/j.physa.2019.03.127 ↗
78. Yeow S.T., Shahar A., Aziz N.A., Anuar M.S., Yusof Y.A., Taip F.S., The influence of operational parameters and feed preparation in a convective batch ribbon powder mixer, Drug Design, Development and Therapy, 5 (2011) 465–469. DOI:10.2147/DDDT.S2504710.2147/DDDT.S25047 ↗
79. Yu M., Zhang H., Guo J., Zhang J., Han Y., Three-dimensional DEM simulation of polydisperse particle flow in rolling mode rotating drum, Powder Technology, 396 (2022) 626–636. DOI:10.1016/j.powtec.2021.10.05810.1016/j.powtec.2021.10.058 ↗
80. Zhang L., Jiang Z., Mellmann J., Weigler F., Herz F., Bück A., Tsotsas E., Influence of the number of flights on the dilute phase ratio in flighted rotating drums by PTV measurements and DEM simulations, Particuology, 56 (2021) 171–182. DOI:10.1016/j.partic.2020.09.01010.1016/j.partic.2020.09.010 ↗
81. Zhang L., Jiang Z., Weigler F., Herz F., Mellmann J., Tsotsas E., PTV measurement and DEM simulation of the particle motion in a flighted rotating drum, Powder Technology, 363 (2020) 23–37. DOI:10.1016/j.powtec.2019.12.03510.1016/j.powtec.2019.12.035 ↗
82. Zhang L., Weigler F., Idakiev V., Jiang Z., Mörl L., Mellmann J., Tsotsas E., Experimental study of the particle motion in flighted rotating drums by means of Magnetic Particle Tracking, Powder Technology, 339 (2018) 817–826. DOI:10.1016/j.powtec.2018.08.05710.1016/j.powtec.2018.08.057 ↗