About Modeling and Optimization of Solid Bowl Centrifuges
Source abstract
Abstract
Many processes involve solid bowl centrifuges as a solid–liquid separation step, typically used for clarification, thickening, classification, degritting, mechanical dewatering, and screening. In order to operate solid bowl centrifuges safely, with minimum resource consumption and reduced setup times, modeling and optimization are necessary steps. This is a challenge due to the complex process behavior, which can be overcome by developing advanced physical models and process analysis. This review provides an overview of solid bowl centrifuge applications, their modeling, and addresses future optimization potentials through digital tools. The impact of dispersed phase properties such as particle size, shape, surface roughness, structure, composition, and continuous liquid phase is the reason for the lack of generally applicable models. Laboratory-scale batch sedimentation centrifuges are used to predict material behavior and develop material functions describing separation-related properties such as sedimentation, sediment build-up and sediment transport. The combination of material functions and modeling allows accurate simulation of solid bowl centrifuges from laboratory to industrial scale. Since models usually do not cover all influencing variables, there are often deviations between predictions and the real process behavior. Gray-box modeling and on-line or in-situ process analytics are tools to improve centrifuge operation.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Coagulation and Flocculation Studies · Enhanced Oil Recovery Techniques · Minerals Flotation and Separation Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Institute of Mechanical Process Engineering and Mechanics, Karlsruhe Institute of Technology (KIT), Germany
Funding
Deutsche Forschungsgemeinschaft · Federal Ministry for Economic Affairs and Climate Action
References (100+)
Show source-provided references
1. Al-Naafá M.A., Selim M.S., Sedimentation of polydisperse concentrated suspensions, The Canadian Journal of Chemical Engineering, 67 (1989) 253–264. DOI:10.1002/cjce.545067021210.1002/cjce.5450670212 ↗
2. Ambler C.M., The theory of scaling up laboratory data for the sedimentation type centrifuge, Journal of Microbial and Biochemical Technology, 1 (1959) 185–205. DOI:10.1002/jbmte.39001020610.1002/jbmte.390010206 ↗
3. Ambler C.M., The fundamentals of separation, including Sharples Sigma value for predicting equipment performance, Industrial and Engineering Chemistry Research, 48 (1961) 430–433.10.1021/ie50618a022 ↗
4. Anlauf H., Recent developments in centrifuge technology, Separation and Purification Technology, 58 (2007) 242–246. DOI:10.1016/j.seppur.2007.05.01210.1016/j.seppur.2007.05.012 ↗
5. Arcigni F., Friso R., Collu M., Venturini M., Harmonized and systematic assessment of microalgae energy potential for biodiesel production, Renewable and Sustainable Energy Reviews, 101 (2019) 614–624. DOI:10.1016/j.rser.2018.11.02410.1016/j.rser.2018.11.024 ↗
6. Auzerais F.M., Jackson R., Russel W.B., The resolution of shocks and the effects of compressible sediments in transient settling, Journal of Fluid Mechanics, 195 (1988) 437–462. DOI:10.1017/S002211208800247210.1017/S0022112088002472 ↗
7. Bai C., Park H., Wang L., Modelling solid-liquid separation and particle size classification in decanter centrifuges, Separation and Purification Technology, 263 (2021a) 118408. DOI:10.1016/j.seppur.2021.11840810.1016/j.seppur.2021.118408 ↗
8. Bai C., Park H., Wang L., Measurement of solids concentration in aqueous slurries for monitoring the solids recovery in solid bowl centrifugation, Minerals Engineering, 170 (2021b) 107068. DOI:10.1016/j.mineng.2021.10706810.1016/j.mineng.2021.107068 ↗
9. Balbierer R., Gordon R., Schuhmann S., Willenbacher N., Nirschl H., Guthausen G., Sedimentation of lithium–iron–phosphate and carbon black particles in opaque suspensions used for lithium-ion-battery electrodes, Journal of Materials Science, 54 (2019) 5682–5694. DOI:10.1007/s10853-018-03253-210.1007/s10853-018-03253-2 ↗
10. Beiser M., Bickert G., Scharfer P., Comparison of sedimentation behavior and structure analysis with regard to destabilization processes in suspensions, Chemical Engineering and Technology, 27 (2004) 1084–1088. DOI:10.1002/ceat.20040325210.1002/ceat.200403252 ↗
11. Bell G.R.A., Pearse J.R., Experimental and computational analysis of the feed accelerator for a decanter centrifuge, Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 230 (2016) 97–110. DOI:10.1177/095440891453994010.1177/0954408914539940 ↗
12. Bell G.R.A., Symons D.D., Pearse J.R., Mathematical model for solids transport power in a decanter centrifuge, Chemical Engineering Science, 107 (2014) 114–122. DOI:10.1016/j.ces.2013.12.00710.1016/j.ces.2013.12.007 ↗
13. Bhatty J.I., Clusters formation during sedimentation of dilute suspensions, Separation Science and Technology, 21 (1986) 953–967. DOI:10.1080/0149639860805838910.1080/01496398608058389 ↗
14. Bürger R., Concha F., Settling velocities of particulate systems: 12. Batch centrifugation of flocculated suspensions, International Journal of Mineral Processing, 63 (2001) 115–145. DOI:10.1016/S0301-7516(01)00038-210.1016/S0301-7516(01)00038-2 ↗
15. Buscall R., Mills P.D.A., Goodwin J.W., Lawson D.W., Scaling behaviour of the rheology of aggregate networks formed from colloidal particles, Journal of the Chemical Society, Faraday Transactions 1: Physical Chemistry in Condensed Phases, 84 (1988) 4249–4260. DOI:10.1039/F1988840424910.1039/f19888404249 ↗
16. Byrne E.P., Fitzpatrick J.J., Pampel L.W., Titchener-Hooker N.J., Influence of shear on particle size and fractal dimension of whey protein precipitates: Implications for scale-up and centrifugal clarification efficiency, Chemical Engineering Science, 57 (2002) 3767–3779. DOI:10.1016/S0009-2509(02)00315-910.1016/S0009-2509(02)00315-9 ↗
17. Caponio F., Summo C., Paradiso V.M., Pasqualone A., Influence of decanter working parameters on the extra virgin olive oil quality, European Journal of Lipid Science and Technology, 116 (2014) 1626–1633. DOI:10.1002/ejlt.20140006810.1002/ejlt.201400068 ↗
18. Detloff T., Sobisch T., Lerche D., Particle size distribution by space or time dependent extinction profiles obtained by analytical centrifugation, Powder Technology, 174 (2007) 50–55. DOI:10.1016/j.powtec.2006.10.02110.1016/j.powtec.2006.10.021 ↗
19. Ekdawi N., Hunter R.J., Sedimentation of disperse and coagulated suspensions at high particle concentrations, Colloids and Surfaces, 15 (1985) 147–159. DOI:10.1016/0166-6622(85)80062-710.1016/0166-6622(85)80062-7 ↗
20. Erk A., Anlauf H., Stahl W., Fließeigenschaften feinstdisperser, gesättigter Haufwerke während ihrer Kompression im Zentrifugalfeld, Chemie-Ingenieur-Technik, 76 (2004) 1494–1499. DOI:10.1002/cite.20040702510.1002/cite.200407025 ↗
21. Erk A., Luda B., Influencing sludge compression in solid-bowl centrifuges, Chemical Engineering and Technology, 27 (2004) 1089–1093. DOI:10.1002/ceat.20040326010.1002/ceat.200403260 ↗
22. Esmaeilnejad-Ahranjani P., Hajimoradi M., Optimization of industrial-scale centrifugal separation of biological products: comparing the performance of tubular and disc stack centrifuges, Biochemical Engineering Journal, 178 (2022) 108281. DOI:10.1016/j.bej.2021.10828110.1016/j.bej.2021.108281 ↗
23. Ettmayr A., Bickert G., Stahl W., Zur Konzentrationsabhängigkeit des Sedimentationsvorgangs von Feinstpartikelsuspensionen in Zentrifugen, F+S Filtrieren u. Separieren, 15 (2001) 58–65.
24. Faust T., Gösele W., Untersuchungen zur klärwirkung von dekantierzentrifugen, Chemie Ingenieur Technik, 57 (1985) 698–699. DOI:10.1002/cite.33057081410.1002/cite.330570814 ↗
25. Flegler A., Schneider M., Prieschl J., Stevens R., Vinnay T., Mandel K., Continuous flow synthesis and cleaning of nano layered double hydroxides and the potential of the route to adjust round or platelet nanoparticle morphology, RSC Advances, 6 (2016) 57236–57244. DOI:10.1039/c6ra09553d10.1039/C6RA09553D ↗
26. Flegler A., Wintzheimer S., Schneider M., Gellermann C., Mandel K., Tailored nanoparticles by wet chemical particle technology: from lab to pilot scale, in: Handbook of Nanomaterials for Industrial Applications, Elsevier, 2018, pp. 137–150.10.1016/B978-0-12-813351-4.00007-9 ↗
27. Frank U., Uttinger M.J., Wawra S.E., Lübbert C., Peukert W., Progress in multidimensional particle characterization, KONA Powder and Particle Journal, 39 (2022) 3–28. DOI:10.14356/kona.202200510.14356/kona.2022005 ↗
28. Frost S., Neue Einblicke in die Abscheidung feiner Feststoffe in Dekantierzentrifugen, VDI-Verlag, 2000.
29. Garrido P., Bürger R., Concha F., Settling velocities of particulate systems: 11. comparison of the phenomenological sedimentation-consolidation model with published experimental results, International Journal of Mineral Processing, 60 (2000) 213–227. DOI:10.1016/S0301-7516(00)00014-410.1016/S0301-7516(00)00014-4 ↗
30. Garrido P., Concha F., Bürger R., Settling velocities of particulate systems: 14. unified model of sedimentation, centrifugation and filtration of flocculated suspensions, International Journal of Mineral Processing, 72 (2003) 57–74. DOI:10.1016/S0301-7516(03)00087-510.1016/S0301-7516(03)00087-5 ↗
31. Ginisty P., Mailler R., Rocher V., Sludge conditioning, thickening and dewatering optimization in a screw centrifuge decanter: which means for which result?, Journal of Environmental Management, 280 (2021) 111745. DOI:10.1016/j.jenvman.2020.11174510.1016/j.jenvman.2020.111745 ↗
32. Gleiß M., Dynamische Simulation der Mechanischen Flüssigkeitsabtrennung in Vollmantelzentrifugen, KIT Scientific Publishing, Karlsruhe, 2018.
33. Gleiss M., Hammerich S., Kespe M., Nirschl H., Application of the dynamic flow sheet simulation concept to the solid-liquid separation: separation of stabilized slurries in continuous centrifuges, Chemical Engineering Science, 163 (2017) 167–178. DOI:10.1016/j.ces.2017.01.04610.1016/j.ces.2017.01.046 ↗
34. Göusele W., Schichtströmung in röhrenzentrifugen, Chemie Ingenieur Technik, 40 (1968) 657–659. DOI:10.1002/cite.33040130710.1002/cite.330401307 ↗
35. Green M.D., Eberl M., Landman K.A., Compressive yield stress of flocculated suspensions: determination via experiment, AIChE Journal, 42 (1996) 2308–2318. DOI:10.1002/aic.69042082010.1002/aic.690420820 ↗
36. Ha Z., Liu S., Settling velocities of polydisperse concentrated suspensions, Canadian Journal of Chemical Engineering, 80 (2002) 783–790. DOI:10.1002/cjce.545080050110.1002/cjce.5450800501 ↗
37. Haller N., Greßlinger A.S., Kulozik U., Separation of aggregated β-lactoglobulin with optimised yield in a decanter centrifuge, International Dairy Journal, 114 (2021) 104918. DOI:10.1016/j.idairyj.2020.10491810.1016/j.idairyj.2020.104918 ↗
38. Haller N., Kulozik U., Separation of whey protein aggregates by means of continuous centrifugation, Food and Bioprocess Technology, 12 (2019) 1052–1067. DOI:10.1007/s11947-019-02275-110.1007/s11947-019-02275-1 ↗
39. Hammerich S., Gleiß M., Kespe M., Nirschl H., An efficient numerical approach for transient simulation of multiphase flow behavior in centrifuges, Chemical Engineering & Technology, 41 (2018) 44–50. DOI:10.1002/ceat.20170010410.1002/ceat.201700104 ↗
40. Hammerich S., Gleiß M., Nirschl H., Modeling and simulation of solid-bowl centrifuges as an aspect of the advancing digitization in solid-liquid separation, ChemBioEng Reviews, 6 (2019a) 108–118. DOI:10.1002/cben.20190001110.1002/cben.201900011 ↗
41. Hammerich S., Gleiss M., Stickland A.D., Nirschl H., A computationally-efficient method for modelling the transient consolidation behavior of saturated compressive particulate networks, Separation and Purification Technology, 220 (2019b) 222–230. DOI:10.1016/j.seppur.2019.03.06010.1016/j.seppur.2019.03.060 ↗
42. Hammerich S., Stickland A.D., Radel B., Gleiss M., Nirschl H., Modified shear cell for characterization of the rheological behavior of particulate networks under compression, Particuology, 51 (2020) 1–9. DOI:10.1016/j.partic.2019.10.00510.1016/j.partic.2019.10.005 ↗
43. Hardy E.H., NMR Methods for the Investigation of Structure and Transport, Springer Science & Business Media, 2011.
44. Hayakawa O., Nakahira K., Naito M., Tsubaki J.I., Experimental analysis of sample preparation conditions for particle size measurement, Powder Technology, 100 (1998) 61–68. DOI:10.1016/S0032-5910(98)00053-910.1016/S0032-5910(98)00053-9 ↗
45. Hirt C.W., Nichols B.D., Volume of fluid (VOF) method for the dynamics of free boundaries, Journal of Computational Physics, 39 (1981) 201–225. DOI:10.1016/0021-9991(81)90145-510.1016/0021-9991(81)90145-5 ↗
46. Höfgen E., Teo H.E., Scales P.J., Stickland A.D., Vane-in-a-Filter and Vane-under-Compressional-Loading: novel methods for the characterisation of combined shear and compression, Rheologica Acta, 59 (2020) 349–363. DOI:10.1007/s00397-020-01193-w10.1007/s00397-020-01193-w ↗
47. Horozov T.S., Binks B.P., Stability of suspensions, emulsions, and foams studied by a novel automated analyzer, Langmuir, 20 (2004) 9007–9013. DOI:10.1021/la048915510.1021/la0489155 ↗
48. Janoske U., Piesche M., Numerische Simulation der Strömungsvorgänge und des Trennverhaltens von Suspensionen im freien Einzelspalt eines Tellerseparators, Chemie Ingenieur Technik, 71 (1999a) 249–253. DOI:10.1002/cite.33071031510.1002/cite.330710315 ↗
49. Janoske U., Piesche M., Numerical simulation of the fluid flow and the separation behavior in a single gap of a disk stack centrifuge, Chemical Engineering and Technology, 22 (1999b) 213–216. DOI:10.1002/(SICI)1521-4125(199903)22:3<213::AID-CEAT213>3.0.CO;2-C10.1002/(SICI)1521-4125(199903)22:3<213::AID-CEAT213>3.0.CO;2-C ↗
50. Jungbauer A., Continuous downstream processing of biopharmaceuticals, Trends in Biotechnology, 31 (2013) 479–492. DOI:10.1016/j.tibtech.2013.05.01110.1016/j.tibtech.2013.05.011 ↗
51. Karolis A., Stahl W., An expanded mathematical model describing the conveying of pasty material in decanter centrifuges, in: 4th World Filtration Congress, 1986, pp. 9.9–9.16.
52. Kempken R., Preissmann A., Berthold W., Assessment of a disc stack centrifuge for use in mammalian cell separation, Biotechnology and Bioengineering, 46 (1995) 132–138. DOI:10.1002/bit.26046020610.1002/bit.260460206 ↗
53. Khatib Z.I., Faucher M.S., Sellman E.L., Field evaluation of disc-stack centrifuges for separating oil/water emulsions on offshore platforms, in: SPE Annual Technical Conference and Exhibition, 1995.10.2523/30674-MS ↗
54. Kohsakowski S., Seiser F., Wiederrecht J.-P.pdfilip., Reichenberger S., Vinnay T., Barcikowski S., Marzun G., Effective size separation of laser-generated, surfactant-free nanoparticles by continuous centrifugation, Nanotechnology, 31 (2019) 95603. DOI:10.1088/1361-6528/ab55bd10.1088/1361-6528/ab55bd ↗
55. König J., Janssen N., Janoske U., Visualization of the deposition mechanisms in disk stack centrifuges with an acrylic glass bowl top and high-speed image processing, Separation Science and Technology, 56 (2021) 640–652. DOI:10.1080/01496395.2020.172832610.1080/01496395.2020.1728326 ↗
56. König J., Ueding J., Janoske U., Analytical model to characterize the efficiency of disk stack separators, Chemie-Ingenieur-Technik, 92 (2020) 701–710. DOI:10.1002/cite.20190017710.1002/cite.201900177 ↗
57. Konrath M., Brenner A.-K., Dillner E., Nirschl H., Centrifugal classification of ultrafine particles: Influence of suspension properties and operating parameters on classification sharpness, Separation and Purification Technology, 156 (2015) 61–70. DOI:10.1016/j.seppur.2015.06.01510.1016/j.seppur.2015.06.015 ↗
58. Konrath M., Gorenflo J., Hübner N., Nirschl H., Application of magnetic bearing technology in high-speed centrifugation, Chemical Engineering Science, 147 (2016) 65–73. DOI:10.1016/j.ces.2016.03.02510.1016/j.ces.2016.03.025 ↗
59. Konrath M., Hackbarth M., Nirschl H., Process monitoring and control for constant separation conditions in centrifugal classification of fine particles, Advanced Powder Technology, 25 (2014) 991–998. DOI:10.1016/j.apt.2014.01.02210.1016/j.apt.2014.01.022 ↗
60. Kynch G.J., A theory of sedimentation, Transactions of the Faraday Society, 48 (1952) 166–176. DOI:10.1039/tf952480016610.1039/tf9524800166 ↗
61. Landman K.A., White L.R., Eberl M., Pressure filtration of flocculated suspensions, AIChE Journal, 41 (1995) 1687–1700. DOI:10.1002/aic.69041070910.1002/aic.690410709 ↗
62. Lester D.R., Usher S.P., Scales P.J., Estimation of the Hindered Settling Function from Batch-Settling Tests, 51 (2005) 1158–1168. DOI:10.1002/aic.1033310.1002/aic.10333 ↗
63. Leung W.F., New decanter centrifuge technology for improved separation and high throughput, Fluid-Particle Separations Journal, 16 (2004) 37–51.
64. Leung W.W.-F., Industrial Centrifugation Technology, McGraw-Hill, New York, 1998, ISBN: 9780070371910.
65. Leung W.W.F., Separation of dispersed suspension in rotating test tube, Separation and Purification Technology, 38 (2004) 99–119. DOI:10.1016/j.seppur.2003.10.00310.1016/j.seppur.2003.10.003 ↗
66. Lopes A.G., Keshavarz-Moore E., Ultra scale-down device to predict dewatering levels of solids recovered in a continuous scroll decanter centrifuge, Biotechnology Progress, 29 (2013) 1494–1502. DOI:10.1002/btpr.181410.1002/btpr.1814 ↗
67. Menesklou P., Nirschl H., Gleiss M., Dewatering of finely dispersed calcium carbonate-water slurries in decanter centrifuges: about modelling of a dynamic simulation tool, Separation and Purification Technology, 251 (2020) 117287. DOI:10.1016/j.seppur.2020.11728710.1016/j.seppur.2020.117287 ↗
68. Menesklou P., Sinn T., Nirschl H., Gleiss M., Grey box modelling of decanter centrifuges by coupling a numerical process model with a neural network, Minerals, 11 (2021a) 755. DOI:10.3390/min1107075510.3390/min11070755 ↗
69. Menesklou P., Sinn T., Nirschl H., Gleiss M., Scale-up of decanter centrifuges for the particle separation and mechanical dewatering in the minerals processing industry by means of a numerical process model, Minerals, 11 (2021b) 1–18. DOI:10.3390/min1102022910.3390/min11020229 ↗
70. Merkl R., Steiger W., Properties of decanter centrifuges in the mining industry, Minerals and Metallurgical Processing, 29 (2012) 6–12. DOI:10.1007/bf0340232710.1007/BF03402327 ↗
71. Michaels A., Bolger J., Settling rates and sediment volumes of flocculated kaolin suspensions, Industrial & Engineering Chemistry Fundamentals, 1 (1962) 24–33. DOI:10.1021/i160001a00410.1021/i160001a004 ↗
72. Mladenchev T., Modellierung des Filtrations- und Fließverhaltens von ultrafeinen, kompressiblen, flüssigkeitsgesättigten Partikelpackungen, Otto-von-Guericke-Universität Magdeburg, 2007.
73. Najjar Y.S.H., Abu-Shamleh A., Harvesting of microalgae by centrifugation for biodiesel production: a review, Algal Research, 51 (2020) 102046. DOI:10.1016/j.algal.2020.10204610.1016/j.algal.2020.102046 ↗
74. Nazemzadeh N., Malanca A.A., Nielsen R.F., Gernaey K.V., Andersson M.P., Mansouri S.S., Integration of first-principle models and machine learning in a modeling framework: an application to flocculation, Chemical Engineering Science, 245 (2021) 116864. DOI:10.1016/j.ces.2021.11686410.1016/j.ces.2021.116864 ↗
75. Neumann A., Hoyer W., Wolff M.W., Reichl U., Pfitzner A., Roth B., New method for density determination of nanoparticles using a CPS disc centrifugeTM, Colloids and Surfaces B: Biointerfaces, 104 (2013) 27–31. DOI:10.1016/j.colsurfb.2012.11.01410.1016/j.colsurfb.2012.11.014 ↗
76. Peth S., Applications of microtomography in soils and sediments, in: Developments in Soil Science, Elsevier, 2010, pp. 73–101. DOI:10.1016/S0166-2481(10)34003-710.1016/S0166-2481(10)34003-7 ↗
77. Prayitno Y.A.K., Sejati P.A., Zhao T., Iso Y., Kawashima D., Takei M., In situ measurement of hindered settling function in decanter centrifuge by periodic segmentation technique in wireless electrical resistance detector (psWERD), Advanced Powder Technology, 33 (2022) 103370. DOI:10.1016/j.apt.2021.11.02210.1016/j.apt.2021.11.022 ↗
78. Prayitno Y.A.K., Zhao T., Iso Y., Takei M., In situ measurement of sludge thickness in high-centrifugal force by optimized particle resistance normalization for wireless electrical resistance detector (WERD), Measurement Science and Technology, 32 (2020) 034001. DOI:10.1088/1361-6501/abc10810.1088/1361-6501/abc108 ↗
79. Quemada D., Rheology of concentrated disperse systems and minimum energy dissipation principle, Rheologica Acta, 16 (1977) 82–94. DOI:10.1007/BF0151693210.1007/BF01516932 ↗
80. Radel B., Gleiß M., Nirschl H., Crystal breakage due to combined normal and shear loading, Crystals, 12 (2022) Article no: 644. DOI:10.3390/cryst1205064410.3390/cryst12050644 ↗
81. Rathore A.S., Agarwal H., Sharma A.K., Pathak M., Muthukumar S., Continuous processing for production of biopharmaceuticals, Preparative Biochemistry and Biotechnology, 45 (2015) 836–849. DOI:10.1080/10826068.2014.98583410.1080/10826068.2014.985834 ↗
82. Records A., Sutherland K., Decanter Centrifuge Handbook, Elsevier Science, 2001, ISBN:9781856173698.10.1016/B978-185617369-8/50002-2 ↗
83. Reuter H., Sedimentation in der Überlaufzentrifuge, Chemie Ingenieur Technik, 39 (1967) 548–553. DOI:10.1002/cite.33039091010.1002/cite.330390910 ↗
84. Richardson J.F., Zaki W.N., The sedimentation of a suspension of uniform spheres under conditions of viscous flow, Chemical Engineering Science, 3 (1954) 65–73. DOI:10.1016/0009-2509(54)85015-910.1016/0009-2509(54)85015-9 ↗
85. Richardson J.F., Zaki W.N., Sedimentation and fluidisation: part I, Chemical Engineering Research and Design, 75 (1997) S82–S100. DOI:10.1016/S0263-8762(97)80006-810.1016/S0263-8762(97)80006-8 ↗
86. Romani Fernández X., Prediction of multiphase flow and separation efficiency of industrial centrifuges by means of numerical simulation, Karlsruher Institut für Technologie (KIT), 2012, ISBN: 9783954041527.
87. Romaní Fernández X., Nirschl H., A numerical study of the impact of radial baffles in solid bowl centrifuges using computational fluid dynamics, Physical Separation in Science and Engineering, (2010) 510570. DOI:10.1155/2010/51057010.1155/2010/510570 ↗
88. Romaní Fernández X., Nirschl H., Multiphase CFD simulation of a solid bowl centrifuge, Chemical Engineering & Technology, 32 (2009) 719–725. DOI:10.1002/ceat.20080053110.1002/ceat.200800531 ↗
89. Romaní Fernández X., Nirschl H., Fernández X.R., Nirschl H., Simulation of particles and sediment behaviour in centrifugal field by coupling CFD and DEM, Chemical Engineering Science, 94 (2013) 7–19. DOI:10.1016/j.ces.2013.02.03910.1016/j.ces.2013.02.039 ↗
90. Schubert T., Meric A., Boom R., Hinrichs J., Atamer Z., Application of a decanter centrifuge for casein fractionation on pilot scale: effect of operational parameters on total solid, purity and yield in solid discharge, International Dairy Journal, 84 (2018) 6–14. DOI:10.1016/j.idairyj.2018.04.00210.1016/j.idairyj.2018.04.002 ↗
91. Shekhawat L.K., Sarkar J., Gupta R., Hadope S., Application of CFD in bioprocessing: separation of mammalian cells using disc stack centrifuge during production of biotherapeutics, Journal of Biotechnology, 267 (2018) 1–11. DOI:10.1016/j.jbiotec.2017.12.01610.1016/j.jbiotec.2017.12.016 ↗
92. Sinn T., Flegler A., Wolf A., Stübinger T., Witt W., Nirschl H., Gleiß M., Investigation of centrifugal fractionation with time-dependent process parameters as a new approach contributing to the direct recycling of lithium-ion battery components, Metals, 10 (2020) 1–18. DOI:10.3390/met1012161710.3390/met10121617 ↗
93. Skinner S.J., Stickland A.D., White L.R., Lester D.R., Shane P., Analysis of centrifugal settling of strongly flocculated suspensions, in: 12th World Filtration Congress, 2016.
94. Sobisch T., Kavianpour D., Lerche D., Characterization of solid-liquid separation of flocculated mineral slurries by NIR-transmission and X-ray concentration profiling, Proceedings Filtech Köln, Germany, 2016. https://papers.ssrn.com/sol3/papers.cfm?abstract_id=2977872
95. Spelter L.E., Nirschl H., Stickland A.D., Scales P.J., Pseudo two-dimensional modeling of sediment build-up in centrifuges: a compartment approach using compressional rheology, AIChE Journal, 59 (2013) 3843–3855. DOI:10.1002/aic.1411510.1002/aic.14115 ↗
96. Spelter L.E., Schirner J., Nirschl H., A novel approach for determining the flow patterns in centrifuges by means of laser-doppler-anemometry, Chemical Engineering Science, 66 (2011) 4020–4028. DOI:10.1016/j.ces.2011.05.02210.1016/j.ces.2011.05.022 ↗
97. Spelter L.E., Steiwand A., Nirschl H., Processing of dispersions containing fine particles or biological products in tubular bowl centrifuges, Chemical Engineering Science, 65 (2010) 4173–4181. DOI:10.1016/j.ces.2010.04.02810.1016/j.ces.2010.04.028 ↗
98. Stahl S., Spelter L.E., Nirschl H., Investigations on the separation efficiency of tubular bowl centrifuges, Chemical Engineering & Technology, 31 (2008) 1577–1583. DOI:10.1002/ceat.20080030010.1002/ceat.200800300 ↗
99. Stahl W., Langeloh T., Improvement of clarification in decanting centrifuges, German Chemical Engineering, 55 (1983) 324–325. DOI:10.1002/cite.33055042310.1002/cite.330550423 ↗
100. Stahl W.H., Fest-Flüssig-Trennung Band II: Industrie-Zentrifugen, Maschinen- Und Verfahenstechnik, DRM Press, CH-Männedorf, 2004, ISBN:9783952279403.