journal article·2013Open access

Mechanical Resistance due to Shearing of Partially Wet Granular Media

Driss Oulahna, Romain Collet, Alain de Ryck

KONA Powder and Particle Journal· Volume 30· Issue 0

Abstract

Mixing granular media with a given amount of liquid is an operation conducted and used intensively for the preparation of concrete. The power and time required to obtain good homogeneity of the granular paste are known to have a complex relationship with the physical properties of the particles, with the liquid and with the mixer design. In this paper some of these issues are addressed by evaluating the shear resistance of a granular paste. Using model spherical materials (glass beads) and ground and sieved minerals (calcite CaCO3), we investigate experimentally the impact of the particle size, liquid amount and morphology of the particles.From quasi-static experiments in shear cells, different regimes of shear resistance are revealed. In dry conditions, van der Waals’ forces dominate. In wet conditions, a capillary or consolidation regime where shear resistance is dominated by capillary forces is strongly impacted by the morphology of the particles and by the formation of texture. These regimes are qualitatively observed in a bowl mixer for which the variation of the current intensity correlates with the shear resistance observed in quasi-static experiments.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Granular flow and fluidized beds · Grouting, Rheology, and Soil Mechanics · Innovations in Concrete and Construction Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Université de Toulouse, Mines Albi, CNRS, Centre RAPSODEE

References (22)

Show source-provided references
1. 1) Feng, J. Q., Hays, D. A. (2003): Relative importance of electrostatic forces on powder particles, Powder Technology, Vol.135, pp.65–75.10.1016/j.powtec.2003.08.005 ↗
2. 2) Iveson, S. M., Beathe, J. A. and Page, N. W. (2002): The dynamic strength of partially saturated powder compacts: The effect of liquid properties, Powder Technology, Vol.127, pp.149–161.10.1016/S0032-5910(02)00118-3 ↗
3. 3) Seville, J. P. K., Willett, C. D. and Knight, P. C. (2000): Inter-particle forces in fluidisation: A review, Powder Technology, Vol.113, pp.261–268.10.1016/S0032-5910(00)00309-0 ↗
4. 4) Betz, G., Bürgin, P. J. and Leuenberger, H. (2003): Power consumption profile analysis and tensile strength measurements during moist agglomeration, International Journal of Pharmaceutics, Vol.252, pp.11–25.10.1016/S0378-5173(02)00601-4 ↗
5. 5) Betz, G., Bürgin, P. J., and Leuenberger, H. (2004): Power consumption measurement and temperature recording during granulation, International Journal of Pharmaceutics, Vol.272, pp.137–149.10.1016/j.ijpharm.2003.12.005 ↗
6. 6) Cazacliu, B., and Legrand, J. (2008): Characterization of the granular-to-fluid state process during mixing by power evolution in a planetary concrete mixer, Chemical Engineering Science, Vol.63, pp.4617–4630.10.1016/j.ces.2008.06.001 ↗
7. 7) Goldszal, A. and Bousquet, J. (2001): Wet agglomeration of powders: From physics toward process optimization, Powder Technology, Vol.117, pp.221–231.10.1016/S0032-5910(00)00369-7 ↗
8. 8) Newitt, D. M., Conway-Jones, J. M. (1958): A contribution to the theory and practice of granulation, Transactions of the Institution of chemical Engineers, Vol.36, pp.422–442.
9. 9) Collet, R., Oulahna, D., De Ryck, A., Jézéquel, P. H. and Martin, M. (2010): Mixing of a wet granular medium: Effect of the Particle size, the liquid and the granular compacity on the intensity consumption, Chemical Engineering Journal, Vol.164, pp.299–304.10.1016/j.cej.2010.07.012 ↗
10. 10) Collet, R., Oulahna, D., De Ryck, A., Jezequel, P. H. and Martin, M. (2011): Mixing of a wet granular medium: Influence of the liquid addition method, Powder Technology, Vol.208, pp.367–371.10.1016/j.powtec.2010.08.030 ↗
11. 11) Collet, R. (2010): “Critères de malaxabilité des mélanges granulaires humides”, Ph.D. Thesis, Université de Toulouse, France.
12. 12) Rhodes, M. (1990): “Principles of powder technology”, John Wiley & Sons.
13. 13) Galet, L., Patry, S. and Dodds, J. (2010): Determination of the wetability of powders by the Washburn capillary rise method with bed preparation by a centrifugal packing technique, Journal of Colloid and Interface Science, Vol.346, pp.470–475.10.1016/j.jcis.2010.02.051 ↗
14. 14) The institution of chemical engineers (1989), Standard shear testing technique for particulate solids using the shear cell, IchemE.
15. 15) Carson, J. W., Wilms, H. (2006): Development of an international standard for shear testing, Powder Technology, Vol.167, pp.1–9.10.1016/j.powtec.2006.04.005 ↗
16. 16) Schwedes, J. (1996): Measurement of flow properties of bulk solids, Powder Technology, Vol.88, pp.285–290.10.1016/S0032-5910(96)03132-4 ↗
17. 17) Johanson, K., Rabinovich, Y., Moudgil, B., Breece, K. and Taylor, H. (2003): Relationship between particle scale capillary forces and bulk unconfined yield strength, Powder Technology, Vol.138, pp.13–17.10.1016/j.powtec.2003.08.037 ↗
18. 18) Schulze, D. (2008): “Behaviour, characterization, storage and flow”, Powders and bulk solids, Springer.
19. 19) Bocquet, L., Charlaix, E. and Restagno, F. (2002): Physics of humid granular media, Comptes Rendus Physique, Vol.3, pp.207–215.10.1016/S1631-0705(02)01312-9 ↗
20. 20) Pierrat, P. and Caram, H. S. (1997): Tensile strength of wet granular materials, Powder Technology, Vol.91, pp.83–93.10.1016/S0032-5910(96)03179-8 ↗
21. 21) Pietsch, W. (1991): “Size enlargement by agglomeration”, John Willey & Sons, New Jersey.
22. 22) Rumpf, H. (1962): “The strength of granules and agglomerates”, In William A. Knepper, editor, Agglomeration, Interscience publishers, New York.