Compression and Relaxation Properties of Municipal Solid Waste Refuse-Derived Fuel Fluff
Source abstract
Abstract
The compression and relaxation characteristics of municipal solid waste (MSW) refuse-derived-fuel (RDF) fluff were investigated with respect to biodegradable fraction, grind size, moisture content, applied load, and pelleting temperature. Experimental trials were performed by using a single pelleting unit mounted on an Instron universal testing machine. Two grind sizes of each sample were prepared, 3.18 mm and 6.35 mm, and moisture contents were increased to 8 %, 12 %, and 16 % w.b. The applied loads were set at 2 kN, 3 kN, and 4 kN at two temperature settings, 50 C and 90 C. The experimental data for these trials was collected and multiple compression and relaxation models were fitted to the applied pressure, compact density or volume data. The results indicated that the compact density of RDF improved by increasing the grind size, while the compact density of biodegradable pellets increased with increasing pelleting load and temperature. The compact density of pellets produced from RDF ranged from 880-1020 kg/m 3 ; the compact density of the biodegradable pellets ranged from 1120-1290 kg/m 3 . The Walker and Jones models both indicated that the biodegradable material fraction has a higher compressibility than the RDF material, where neither moisture content nor grind size at all levels had a significant effect on the compressibility of either material. The Kawakita-Ldde model estimated the porosity of the pelleted samples, while the Cooper-Eaton model indicated that the primary mechanism of densification was particle rearrangement. Application of the Peleg and Moreyra model for analysis of relaxation properties of the compressed materials determined the asymptotic modulus of the residual stress to be between 89 and 117 MPa for all experimental parameters; however, the RDF material produced more rigid pellets than the biodegradable material.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Coal Combustion and Slurry Processing · Thermochemical Biomass Conversion Processes · activated carbon and charcoal
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Chemical and Biological Engineering, University of Saskatchewan, Canada
Funding
BioFuelNet Canada
References (17)
Show source-provided references
1. Adapa P., Tabil L., Schoenau G., Compression characteristics of non-treated and steam-exploded barley, canola, oat, and wheat straw grinds. Applied Engineering in Agriculture, 26 (2010) 617–632.10.13031/2013.32052 ↗
2. ASABE (American Society of Agricultural and Biological Engineers Standards), ASAE S358.3 Moisture measurement—forages, ASABE, St. Joseph, Michigan, 2008.
3. BioFuelNet (BioFuelNet Canada), 2015, What are biofuels? accessed 15.02.2017.
4. Cooper A., Eaton L., Compaction behavior of several ceramic powders, Journal of the American Ceramic Society, 45 (1962) 97–101.10.1111/j.1151-2916.1962.tb11092.x ↗
5. EWMC (Edmonton Waste Management Centre), 2015, Waste-to-biofuels and chemicals facility: turning garbage into fuel accessed 15.02.2017.
6. Jones W.D., Fundamental principles of powder metallurgy, Edward Arnold Publishers Ltd., London, 1960, pp. 242–370.
7. Kawakita K., Lüdde K., Some considerations on powder compression equations, Powder Technology, 4(1971) 61–68.10.1016/0032-5910(71)80001-3 ↗
8. Mani S., Tabil L., Sokhansanj S., An overview of compaction of biomass grinds, Powder Handling & Processing, 15 (2003) 160–168.
9. Mani S., Tabil L., Sokhansanj S., Effects of compressive force, particle size, and moisture content on mechanical properties of biomass pellets from grasses, Biomass and Bioenergy, 30 (2006) 648–654.10.1016/j.biombioe.2005.01.004 ↗
10. Mor S., Ravindra K., Visscher A. De, Dahiya R., Chandra A., Municipal solid waste characterization and its assessment for potential methane generation: A case study, Science of the Total Environment, 371 (2006) 1–10.10.1016/j.scitotenv.2006.04.014 ↗
11. Moreyra R., Peleg M., Compressive deformation patterns of selected food powders, Journal of Food Science, 45 (1980) 866–868.10.1111/j.1365-2621.1980.tb07467.x ↗
12. Payne J.D., Improving quality of pellet feeds, Milling Feed and Fertilizer, 161 (1978) 3441.
13. Shaw M., Feedstock and process variables influencing biomass densification, M.Sc. Thesis, 2008.
14. Sokhansanj S., Mani S., Bi X., Zaini P., Tabil L., Binderless pelletization of biomass, Presented at the ASAE Annual International Meeting, July 17–20, 2005, Tampa, Florida. ASAE Paper No. 056061. ASAE, 2950 Niles Road, St. Joseph, MI 49085–9659 USA.
15. Talebi S., Tabil L., Opoku A., Shaw M., Compression and relaxation properties of timothy hay, International Journal of Agricultural and Biological Engineering, 4 (2011) 69–78.
16. Walker E., The properties of powders—Part VI: The compressibility of powders, Transactions of the Faraday Society, 19 (1923) 73–82.10.1039/tf9231900073 ↗
17. Yaman S., Şahan M., Haykiri-açma H., Şeşen K., Küçükbayrak S., Production of fuel briquettes from olive refuse and paper mill waste, Fuel Processing Technology, 68 (2000) 23–31.10.1016/S0378-3820(00)00111-9 ↗