journal article·2011Open access

The Investigation of Breakage Probability of Irregularly Shaped Particles by Impact tests

Sergej Aman, Jürgen Tomas, Peter Müller, Haim Kalman, Yevgeny Rozenblat

KONA Powder and Particle Journal· Volume 29· Issue 0

Abstract

The modelling of experimental distributions of breakage energy by compression and impact was carried out. In terms of our model, the part of the particle that is directly contacted with the stressing tool is admitted into the equation as a hemispherical asperity with known breakage energy distribution. The main contribution of stressing energy is accumulated by this hemispherical asperity that is responsible for crack generation and particle breakage. The breakage probability distribution of particles is calculated as a superposition of the breakage probabilities of asperities. Based on geometrical similarity, one can assume the same normalized log-normal size distribution of asperities for all tested particles of a given material. As a result, all experimental distributions of normalized breakage energy can be fitted with the same log-normal function for all particle sizes.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Mineral Processing and Grinding · Granular flow and fluidized beds · Cyclone Separators and Fluid Dynamics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Mechanical Process Engineering, The Otto-von-Guericke University

Laboratory for Conveying and Handling of Particulate Solids, Department of Mechanical Engineering, Ben-Gurion University of the Negev

References (34)

Show source-provided references
1. 1) Han, T. and Kalman, H. (2003): Theoretical and experimental study of multicompression particle breakage. Advanced Powder Technol., Vol. 14, No. 5, pp. 605–620.10.1163/156855203322448372 ↗
2. 2) Han, T., Petukhov, Y., Levy, A. and Kalman, H. (2006): Theoretical and Experimental Study of Multi-Impact Breakage of Particles,” Advanced Powder Technology, Vol. 17, pp. 135–157.10.1163/156855206775992328 ↗
3. 3) Kalman, H., Hubert, M., Grant, E., Petukhov, Y. and Haim, M. (2004): Fatigue Behavior of Impact Comminution and Attrition Units, Powder Technology, Vol. 146, No. 1–2, pp.1–9.10.1016/j.powtec.2004.07.011 ↗
4. 4) Tavares, L.M. and King, R.P. (1998): Single-particle fracture under impact loading, Int. J. Miner. Process, 54, pp. 1–28.10.1016/S0301-7516(98)00005-2 ↗
5. 5) Tavares, L.M. and King, R.P. (2002): Modelling of particle fracture by repeated impacts using continuum damage mechanics. Powder Technology, Vol. 123, pp.138–146.10.1016/S0032-5910(01)00438-7 ↗
6. 6) Bažant, Z. P. and Luigi, C. (1991): “Stability of Structures: Elastic, Inelastic, Fracture and Damage Theories”, New York: Oxford University Press.
7. 7) Aman, S., Tomas, J. and Kalman, H. (2010): Breakage probability of irregularly shaped particles, Chem. Eng. Sci., 65, pp. 1503–1512.10.1016/j.ces.2009.10.016 ↗
8. 8) Gildmeister, H. and Schönert, K. (1972): Berechnung zur Wellenausbreitung in Kugeln und Bruchphänomene in Kreisscheiben bei Prallbeanspruchung. Dechema Bd.69, Nr.17, pp.1–35.
9. 9) Tavares, L. M. (2007): Breakage of Single Particles: Quasi-Static, Handbook of Powder Technology, Vol. 12, Particle Breakage, ed. by: Salman, A. D., Ghadiri, M. and Hounslow, M.J., pp.3–68.10.1016/S0167-3785(07)12004-2 ↗
10. 10) Salman, D., Fu, J., Gorham, D. A. and Hounslow, M. J. (2003): Impact breakage of fertiliser granules, Powder Technology, Volume 130, Issues 1–3, pp.359–36610.1016/S0032-5910(02)00237-1 ↗
11. 11) Schubert, W., Khanal, M. and Tomas, J. (2005): Impact crushing of particle-particle compounds - Experiment and simulation. Int. J. Miner. Process, 75, pp. 41–52.10.1016/j.minpro.2004.01.006 ↗
12. 12) Ghadiri, M., Moreno-Atanasio, R. and Matsusaka, S. (2002): Impact damage analysis of agglomerates by Distinct Element Method, Journal of the Society of Powder Technology, Japan, 39, pp. 885–892.
13. 13) Rumpf, H. (1973): Physical aspects of comminution and new formation of law of comminution, Powder Technology, Vol. 7, pp.145–159.10.1016/0032-5910(73)80021-X ↗
14. 14) Stiesβ, M. (1976): “Die Druckbeanspruchung von elastischen und inelastischen Kugeln bis zum Bruch”, Dissertation TU Karlsruhe.
15. 15) Baumgardt, S. (1976): Beitrag zur Einzelkornschlag-zerkleinerung sproder Stöffe, Freiberger Forsch.-H., A560, pp.29–106.
16. 16) Baumgardt, S., Buss, B., May, P. and Schubert, H. (1976): On the comparison of results in single grain crushing under different kinds of load, Proceedings of the 11th International Mineral Processing Congress, Cagliari, p. 3.
17. 18) Weichert, R. (1991): Theoretical Prediction of Energy Consumption and Particle Size Distribution in Grinding and Drilling of Brittle Materials, Part. Part. Syst. Charact., 8, pp. 55–62.10.1002/ppsc.19910080111 ↗
18. 19) Weichert, R. (1992): Anwendung von Fehlstellenstatistik und Bruchmechanik zur Beschreibung von Zerkleinerungsvorgängen, Zement-Kalk-Gips, 45(1), pp.1–8.
19. 20) Weibull, W. (1939): A statistical theory of the strength of materials. Ingeniörsvetens-kakademiens Handlingar 151, Generalstabens Litografiska Anstalts Förlag, Stockholm
20. 21) Antonyuk, S., Tomas, J., Heinrich, S. and Mörl, L. (2005): Breakage behavior of spherical granulates by compression, Chem. Eng. Sci., Vol. 60, pp.4031–4044.10.1016/j.ces.2005.02.038 ↗
21. 22) Antonyuk, S., Khanal, M., Tomas, J., Heinrich, S. and Mörl, L. (2006): Impact breakage of spherical granules: experimental study and DEM simulation, Chem. Eng. Sci., Vol. 45, pp.838–856.10.1016/j.cep.2005.12.005 ↗
22. 23) Tomas, J. (2007): Adhesion of ultra fine particles—a micromechanical approach. Chem. Eng. Sci., 62, pp. 1997–2010.10.1016/j.ces.2006.12.055 ↗
23. 24) Tomas, J. (2007): Adhesion of ultra fine particles—energy absorption at contact. Chem. Eng. Sci., 62, pp. 5925–5939.10.1016/j.ces.2007.06.036 ↗
24. 25) Salman, D., Fu, J., Gorham, D. A. and Hounslow, M. J. (2003): Impact breakage of fertiliser granules, Powder Technology, Volume 130, Issues 1–3, pp. 359–366.10.1016/S0032-5910(02)00237-1 ↗
25. 26) Salman, D., Reynolds, G. K., Fu, J. S., Cheong, Y. S., Biggs, C. A., Adams, M.J., Gorham, D. A., Lukenics, J. and Hounslow, M. J. (2004): Descriptive classification of the impact failure modes of spherical particles, Powder Technology, Volumes 143–144, 25 June, pp. 19–30.10.1016/j.powtec.2004.04.005 ↗
26. 27) May, P. (1976): Einzelkorndruckzerkleinerung von spröden Stoffen. Freiberger Forsch.-H. A550, pp. 85–179.
27. 28) Baumgardt, S., Buss, B., May, P. and Schubert, H. (1978): Zum Vergleich von Zerkleinerungs-ergebnissen der Einzelkornzerkleinerung bei verschiedenen Beanspruchungsarten, Powder Technology 8, pp. 107–115.10.1016/0032-5910(73)80073-7 ↗
28. 29) Baumgardt, S. (1976): Beitrag zur Einzelkornschlagzerkleinerung spröder Stoffe, Freiberger Forsch.-H., A560, pp. 29–106.
29. 30) Buss, B. and Schubert, H. (1978): Ergebnisse von Untersuchungen zerkleinerungstechnischer Mikroprozesse, Neue Bergbautechnik, 8, 12, pp. 706–710.
30. 31) Strom, R. (1986): Wahrscheinlichkeitsrechnung, math-ematische Statistik und statistische Qualltätskontrolle, Leipzig, Fachbuchverl., pp. 42–43.
31. 32) Schubert, H. (2003): “Handbuch der Mechanischen Verfahrenstechnik. Bd. 1”, Weinheim: Wiley-VCH Verlag.10.1002/3527603352.ch1 ↗
32. 33) Kolmogorov, A.N. (1941): On the logarithmic normal size distribution of particles by grinding, Dokl. Akad. Nauk., SSSR 31, pp. 99–101.
33. 34) Violay, M., Gibert, B., Mainprice, D., Evans, B., Pezard, P.A. and Flovenz, O. (2009): Brittle ductile transition in experimentally deformed basalt under oceanic crust conditions. Geophys. Res. Abstr. 11, (EGU2009-5507-7, EGU General Assembly 2009).
34. 35) Agniel, Y. (1992): “Bedeutung der Einzelgranalieneigenschaften zur Defektvermeidung in trockengepressten keramischen Modellpulvern”, Dissertation, Universität Karlsruhe (TH).